AMC1304M25
- Pin-compatible family optimized for shunt-resistor-based current measurements:
- ±50-mV or ±250-mV input voltage ranges
- CMOS or LVDS digital interface options
- Excellent DC performance supporting high-precision sensing on system level:
- Offset error: ±50 µV or ±100 µV (max)
- Offset drift: 1.3 µV/°C (max)
- Gain error: ±0.2% or ±0.3% (max)
- Gain drift: ±40 ppm/°C (max)
- Safety-related certifications:
- 7000-VPK reinforced isolation per
DIN VDE V 0884-11: 2017-01 - 5000-VRMS isolation for 1 minute per UL1577
- CAN/CSA no. 5A-component acceptance service notice and IEC 62368-1 end equipment standard
- 7000-VPK reinforced isolation per
- Transient immunity: 15 kV/µs (min)
- High electromagnetic field immunity
(see application note SLLA181A) - External 5-MHz to 20-MHz clock input for
easier system-level synchronization - On-chip 18-V LDO regulator
- Fully specified over the extended industrial temperature range
The AMC1304 is a precision, delta-sigma (ΔΣ) modulator with the output separated from the input circuitry by a capacitive double isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7000 VPEAK according to the DIN VDE V 0884-11, UL1577 and CSA standards. Used in conjunction with isolated power supplies, the device prevents noise currents on a high common-mode voltage line from entering the local system ground and interfering with or damaging low voltage circuitry.
The input of the AMC1304 is optimized for direct connection to shunt resistors or other low voltage-level signal sources. The unique low input voltage range of the ±50-mV device allows significant reduction of the power dissipation through the shunt while supporting excellent ac and dc performance. By using an appropriate digital filter (that is, as integrated on the TMS320F2807x or TMS320F2837x families) to decimate the bit stream, the device can achieve 16 bits of resolution with a dynamic range of 81 dB (13.2 ENOB) at a data rate of 78 kSPS.
On the high-side, the modulator is supplied by an integrated low-dropout (LDO) regulator that allows an unregulated input voltage between 4 V and 18 V (LDOIN). The isolated digital interface operates from a 3.3-V or 5-V power supply (DVDD).
The AMC1304 is available in a wide-body SOIC-16 (DW) package and is specified from –40°C to +125°C.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMC-MOD-50A-EVM — 50A 절연 전류 감지를 위한 AMC1306 평가 모듈
AMC-MOD-50A-EVM은 ±50A 션트 기반 전류 감지를 위해 설계된 절연 전류 감지 평가 모듈입니다. 이 EVM을 사용하면 외부 션트 저항을 통해 최대 ±50A 피크 전류를 감지하는 동시에 AMC1306M05의 절연 장벽을 통해 절연 출력을 측정할 수 있습니다. AMC1306M05는 션트 기반 전류 측정에 최적화된 고정밀 절연 모듈레이터이며 Isabellenhütte™ BVN-M-R001 션트 저항과 함께 사용할 수 있습니다. 이 EVM은 비아 스티칭은 큰 전류에서 방열을 용이하게 하며 ±1%(일반) 이내의 정확도로 (...)
AMC1304M25EVM — AMC1304M25 평가 모듈
AMC1304M25는 전류 모니터링, 산업용 공정 제어 및 모터 위치 조정 시스템을 비롯한 고해상도 측정 애플리케이션에 사용되는 절연 단일 채널 델타-시그마(ΔΣ) 모듈레이터입니다. AMC1304M25 평가 모듈(EVM)은 AMC1304M25 평가에 필요한 모든 부품이 포함된 소형 폼 팩터 보드입니다.
AMC1304M25EVM 사용 설명서에는 완전한 회로 회로도가 포함되어 있으며 EVM의 특성 및 사용에 대해 설명합니다. AMC1304M25에 대한 자세한 내용은 AMC1304M25 제품 페이지를 참조하십시오.
TMDSCNCD28379D — C2000™ Delfino MCU controlCARD™용 F28379D 개발 키트
TMDSCNCD28379D는 TI MCU의 F2837xD, F2837xS 및 F2807x 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. controlCARD는 초기 평가 및 시스템 프로토타이핑에 이상적입니다. controlCARD는 두 가지 표준 폼 팩터(100핀 DIMM 또는 180핀 HSEC) 중 하나를 활용하여 프로파일이 낮은 단일 보드 컨트롤러 솔루션을 제공하는 완전한 보드 수준 모듈입니다. 첫 번째 평가의 경우 controlCARD는 일반적으로 베이스보드와 함께 번들로 구매하거나 (...)
TIEVM-HV-1PH-DCAC — 전압 소스 및 그리드 연결 모드를 지원하는 단상 인버터 개발 키트
TMDXIDDK379D — 산업용 모터 제어용 C2000 DesignDRIVE 개발 키트
DesignDRIVE 개발 키트(IDDK) 하드웨어는 고전압 3상 모터를 구동하기 위한 최대 전력계를 갖춘 통합 서보 드라이브 설계를 제공하며 다양한 위치 피드백, 전류 센싱 및 제어 토폴로지의 평가를 용이하게 해줍니다.
델타-시그마 싱크 필터 8개, 16비트 또는 12비트 ADC 4개, 윈도우형 비교기 등 C2000™ MCU의 감지 주변 기기를 통해 DesignDRIVE 키트는 션트, 플럭스게이트/홀, 델타-시그마 전류 센싱을를 동시에 지원할 수 있습니다. 위치 피드백을 위해 이 키트는 EnDat, BiSS, T포맷, 증분형 (...)SBAR010 — Delta Sigma Modulator Filter Calculator
지원되는 제품 및 하드웨어
제품
절연 ADC
정밀 ADC
하드웨어 개발
평가 보드
SBAR013 — Isolated Amplifier Voltage Sensing Excel Calculator
지원되는 제품 및 하드웨어
제품
절연 증폭기
절연 ADC
정밀 ADC
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
지원되는 제품 및 하드웨어
제품
절연 증폭기
절연 ADC
정밀 ADC
TIDA-00080 — 절연 델타-시그마 모듈레이터 기반 AC/DC 전압 및 전류 측정 모듈 레퍼런스 디자인
TIDM-02006 — 고속 직렬 인터페이스(FSI)를 통한 분산 다중 축 서보 드라이브 레퍼런스 설계
TIDM-HV-1PH-DCAC — 전압 소스 및 그리드 연결 모드를 지원하는 단상 인버터 레퍼런스 설계
TIDA-00171 — 모터 드라이브용 절연 전류 션트 및 전압 측정 레퍼런스 디자인
TIPD165 — 절연, 션트 기반 전류 감지 레퍼런스 디자인
TIDA-00601 — 절연 션트 센서를 사용한 멀티 위상 에너지 측정 레퍼런스 디자인
이 (...)
TIDA-00738 — 보호 릴레이용 션트를 사용하는 확장 전류 및 전압 측정 레퍼런스 디자인
TIDA-00209 — AM437x를 사용하는 모터 드라이브를 위한 절연 전류 션트 및 전압 측정 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.