CC1312R7
Wireless microcontroller
- Powerful 48-MHz Arm® Cortex®-M4F processor
- 704KB flash program memory
- 256KB of ROM for protocols and library functions
- 8KB of cache SRAM
- 144KB of ultra-low leakage SRAM with parity for high-reliability operation
- Dynamic multiprotocol manager (DMM) driver
- Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
- Supports over-the-air upgrade (OTA)
Ultra-low power sensor controller
- Autonomous MCU with 4KB of SRAM
- Sample, store, and process sensor data
- Fast wake-up for low-power operation
- Software defined peripherals; capacitive touch, flow meter, LCD
Low power consumption
- MCU consumption:
- 2.63 mA active mode, CoreMark
- 55 µA/MHz running CoreMark
- 0.8 µA standby mode, RTC, 144KB RAM
- 0.1 µA shutdown mode, wake-up on pin
- Ultra low-power sensor controller
consumption:
- 25.2 µA in 2 MHz mode
- 701 µA in 24 MHz mode
- Radio Consumption:
- 5.4 mA RX at 868 MHz
- 24.9 mA TX at +14 dBm at 868 MHz
Wireless protocol support
High performance radio
- -121 dBm for 2.5-kbps long-range mode
- -110 dBm at 50 kbps, 802.15.4, 868 MHz
- Output power up to +14 dBm with temperature compensation
Regulatory compliance
- Suitable for systems targeting compliance with these standards:
- ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
- FCC CFR47 Part 15
- ARIB STD-T108
MCU peripherals
- Digital peripherals can be routed to any GPIO
- Four 32-bit or eight 16-bit general-purpose timers
- 12-bit ADC, 200 kSamples/s, 8 channels
- 8-bit DAC
- Two comparators
- Programmable current source
- Two UART, two SSI, I2C, I2S
- Real-time clock (RTC)
- Integrated temperature and battery monitor
Security enablers
- AES 128- and 256-bit cryptographic accelerator
- ECC and RSA public key hardware accelerator
- SHA2 Accelerator (full suite up to SHA-512)
- True random number generator (TRNG)
Development tools and software
- LP-CC1312R7 Development Kit
- SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- Sensor Controller Studio for building low-power sensing applications
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.8-V to 3.8-V single supply voltage
- -40 to +105°C
Package
- 7-mm × 7-mm RGZ VQFN48 (30 GPIOs)
- RoHS-compliant package
The SimpleLink™ CC1312R7 device is a multiprotocol Sub-1 GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty , Wi-SUN , proprietary systems, including the TI 15.4-Stack (Sub-1 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC1312R7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.
The CC1312R7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 287 to 351-MHz, 359 to 527-MHz, 861 to 1054-MHz, and 1076 to 1315-MHz frequency bands. PHY and frequency band switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC1312R7 has an efficient built-in PA that supports +14 dBm TX at 24.9 mA current consumption. In RX it has -121 dBm sensitivity and 88 dB blocking ±10 MHz in SimpleLink™ long-range mode with 2.5-kbps data rate.
The CC1312R7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.
The CC1312R7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC1312R7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC1312R7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-CC1312R7 — CC1312R7 SimpleLink™ 다중 표준 무선 MCU용 LaunchPad™ 개발 키트
이 LaunchPad™ 개발 키트는 SimpleLink™ Sub-1GHz CC1312R7 무선 MCU를 사용하여 개발 속도를 높이는 데 사용됩니다. 소프트웨어 지원은 SIMPLELINK-LOWPOWER-SDK 소프트웨어 개발 키트에서 제공합니다.
AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk 개발 툴 키트
Amazon Sidewalk는 호환되는 Amazon Echo 및 Ring 장치와 같은 Amazon Sidewalk 브리지를 사용하여 가정, 건물 내, 전체 이웃은 물론 도시 전체 사용 사례를 포괄하는 안전하고 안정적인 커뮤니티 네트워크로, IoT 장치를 위한 클라우드 연결을 제공합니다. Amazon Sidewalk는 단거리 통신을 위한 Bluetooth® 저에너지를 사용하여 가정 및 그 이상의 저대역폭과 장거리 연결을 지원하고, 1GHz 미만 915MHz 주파수를 사용하여 더 먼 거리를 지원합니다. Amazon Sidewalk는 (...)
KNGRY-3P-MICROPHONE — CC1311 및 CC1312용 Guangzhou Kingray Information Technology 무선 디지털 마이크
WA12XX 시리즈는 UHF 고성능 디지털 무선 마이크 시스템으로, 무선 마이크, 레이저 포인터, PPT 페이지 플립 및 기타 기능이 통합되어 있습니다. 이 기능을 사용하면 사용 환경에서 깨끗한 채널을 자동으로 검색하여 채널을 빠르게 잠그고 간섭을 제거할 수 있습니다. 또한 적외선 주파수 페어링 모드가 탑재되어 열악한 사용 환경에서도 견딜 수 있습니다. 이 시리즈 제품은 UHF 주파수 대역에서 작동하므로 WiFi/2.4G/700MHz/5.8G의 간섭을 완벽하게 방지할 수 있습니다.
BDE-3P-SUB1GHZ — BDE Sub-1GHz 모듈
BDE Technology, Inc.는 TI 인증을 받은 타사 모듈 공급자입니다. TI의 CC1XXX Sub-1GHz 무선 커넥티비티 제품에 기반을 둔 BDE 모듈을 사용하면 고객은 개발 주기 단축, 설계 불확실성 감소, 제품 비용을 낮추고, 경쟁력 있는 제품을 효율적으로 출시할 수 있습니다. BDE는 Amazon Sidewalk, Wi-SUN, mioty 및 무선 M-Bus와 같은 초저전력 무선 통신 기술을 전 세계의 OEM, 시스템 통합업체, 장치 제조업체 및 솔루션 제공업체에 제공하는 전문 기술을 제공합니다.
LB-3P-TRACE32-WIRELESS — 무선 연결용 Lauterbach TRACE32® 디버그 시스템
Lauterbach의 TRACE32® 툴은 개발자가 다양한 종류의 TI 무선 연결 칩을 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템용 디버그 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 다음을 포함하는 모든 개발 단계를 위한 완벽한 솔루션입니다. 전체 온칩 중단점 지원, 런타임 메모리 액세스, 플래시 프로그래밍 및 벤치마크 카운터. 모든 것이 스크립팅이 가능하므로 개발자는 동일한 테스트 시퀀스를 계속해서 (...)
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SENSOR-CONTROLLER-STUDIO — Sensor controller studio
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
SIMPLELINK-SDK-EDGEAI-PLUGIN — Edge AI Plugin and application support for SimpleLink™ family of devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
SUB1GHZ-HW-DESIGN-REVIEW — Hardware design reviews for SimpleLink™ CC1xxx devices
SimpleLink™ 1GHz 미만 하드웨어 설계 검토 프로세스 시작하기:
- 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 CC1xxx 제품 페이지 링크 참조).
- 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
- 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 connectivity-sub1ghz-hw-review@list.ti.com으로 이메일로 보냅니다
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.