CC2652R7
Wireless microcontroller
- Powerful 48-MHz Arm® Cortex®-M4F processor
- 704KB flash program memory
- 256KB of ROM for protocols and library functions
- 8KB of cache SRAM
- 144KB of ultra-low leakage SRAM with parity for high-reliability operation
- Dynamic multiprotocol manager (DMM) driver
- Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
- Supports over-the-air upgrade (OTA)
Ultra-low power sensor controller
- Autonomous MCU with 4KB of SRAM
- Sample, store, and process sensor data
- Fast wake-up for low-power operation
- Software defined peripherals; capacitive touch, flow meter, LCD
Low power consumption
- MCU consumption:
- 3.10 mA active mode, CoreMark
- 65 µA/MHz running CoreMark
- 0.9 µA standby mode, RTC, 144KB RAM
- 0.1 µA shutdown mode, wake-up on pin
- Ultra low-power sensor controller
consumption:
- 29.2 µA in 2 MHz mode
- 799 µA in 24 MHz mode
- Radio Consumption:
- 6.4 mA RX
- 7.3 mA TX at 0 dBm
- 9.7 mA TX at +5 dBm
Wireless protocol support
- Thread, Zigbee®, Matter
- Bluetooth® 5.2 Low Energy
- SimpleLink™ TI 15.4-stack
- 6LoWPAN
- Proprietary systems
High performance radio
- -104 dBm for Bluetooth® Low Energy 125-kbps
- Output power up to +5 dBm with temperature compensation
Regulatory compliance
- Suitable for systems targeting compliance with these standards:
- ETSI EN 300 328, EN 300 440 Cat. 2 and 3
- FCC CFR47 Part 15
- ARIB STD-T66
MCU peripherals
- Digital peripherals can be routed to any GPIO
- Four 32-bit or eight 16-bit general-purpose timers
- 12-bit ADC, 200 kSamples/s, 8 channels
- 8-bit DAC
- Two comparators
- Programmable current source
- Two UART, two SSI, I 2C, I 2S
- Real-time clock (RTC)
- Integrated temperature and battery monitor
Security enablers
- AES 128- and 256-bit cryptographic accelerator
- ECC and RSA public key hardware accelerator
- SHA2 Accelerator (full suite up to SHA-512)
- True random number generator (TRNG)
Development tools and software
- LP-CC2652R7 Development Kit
- SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- Sensor Controller Studio for building low-power sensing applications
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.8-V to 3.8-V single supply voltage
- 1.7-V to 1.95-V external regulator mode
- -40 to +105°C
Package
- 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
- RoHS-compliant package
The SimpleLink™ CC2652R7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Matter, Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652R7 is based on an Arm ® Cortex ® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.
The CC2652R7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652R7 supports +5 dBm TX at 9.7 mA in the 2.4-GHz band. CC2652R7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.
The CC2652R7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.
The CC2652R7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC2652R7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652R7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-CC2652R7 — CC2652R7 SimpleLink™ 다중 표준 무선 MCU용 LaunchPad™ 개발 키트
이 LaunchPad™는 Bluetooth®, Zigbee® 및 Thread를 지원하는 SimpleLink™ 다중 표준 CC2652R7 무선 MCU를 사용하여 개발 속도를 높이는 데 사용됩니다. 소프트웨어 지원은 SIMPLELINK-LOWPOWER-SDK 소프트웨어 개발 키트에서 제공합니다.
ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머
μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.
독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.
컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.
AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk 개발 툴 키트
Amazon Sidewalk는 호환되는 Amazon Echo 및 Ring 장치와 같은 Amazon Sidewalk 브리지를 사용하여 가정, 건물 내, 전체 이웃은 물론 도시 전체 사용 사례를 포괄하는 안전하고 안정적인 커뮤니티 네트워크로, IoT 장치를 위한 클라우드 연결을 제공합니다. Amazon Sidewalk는 단거리 통신을 위한 Bluetooth® 저에너지를 사용하여 가정 및 그 이상의 저대역폭과 장거리 연결을 지원하고, 1GHz 미만 915MHz 주파수를 사용하여 더 먼 거리를 지원합니다. Amazon Sidewalk는 (...)
RFSTAR-3P-CC2652-MODULES — CC2652R CC2652R7 CC2652P CC2652P7 기반 RFSTAR 다중 프로토콜 무선 모듈
RF-star는 10년 이상 무선 연결 모듈용 TI의 3P IDH로, BLE, Matter, ZigBee,Thread, Wi-Fi, Sub-1G 및 Wi-SUN 등 TI 제품에 기반을 둔 광범위한 무선 모듈 및 솔루션을 공급하는 데 주력하고 있습니다.
RF-BM-2652B1 무선 모듈은 CC2652R을, RF-BM-2652B2는 CC2652R7을, RF-BM-2652P2(I) 시리즈는 CC2652P7을, RF-BM-2652P4(I)는 CC2652P7을 기반으로 하지만, Matter(CC2652P7만 해당), Thread, (...)
LB-3P-TRACE32-WIRELESS — 무선 연결용 Lauterbach TRACE32® 디버그 시스템
Lauterbach의 TRACE32® 툴은 개발자가 다양한 종류의 TI 무선 연결 칩을 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템용 디버그 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 다음을 포함하는 모든 개발 단계를 위한 완벽한 솔루션입니다. 전체 온칩 중단점 지원, 런타임 메모리 액세스, 플래시 프로그래밍 및 벤치마크 카운터. 모든 것이 스크립팅이 가능하므로 개발자는 동일한 테스트 시퀀스를 계속해서 (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머
WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
SIMPLELINK-MATTER — SimpleLink™ family of devices Matter software
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
SIMPLELINK-TI-OPENTHREAD-SDK — SimpleLink™ family of devices OpenThread software
TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
ARM-CGT — Arm® 코드 생성 툴 – 컴파일러
The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SENSOR-CONTROLLER-STUDIO — Sensor controller studio
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
SIMPLELINK-CONNECT — SimpleLink Connect App for the SimpleLink Low Power SDKs
SimpleLink Connect 모바일 앱은 모바일 기기용 Bluetooth® 저에너지 애플리케이션의 다음 기능과 함께 작동합니다.
- SIMPLELINK-LOWPOWER-SDK를 실행하는 CC23XX 장치
- CC33XX-SOFTWARE를 실행하는 호스트에 연결된 CC33xx 장치
이 앱은 사용자가 iOS 또는 Android를 사용하여 자신의 모바일 앱을 빠르게 구축할 수 있는 기준을 제공합니다. 소스 코드가 제공되므로 쉽게 사용자 지정할 수 있습니다.
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 일대일로 연락할 수 있는 방법을 제공합니다. 간단한 3단계 검토 요청 절차와 관련 기술 문서 및 리소스 링크는 여기서 확인할 수 있습니다.
시작하기
일반 설계 질문은 2.4GHz 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
하드웨어 설계 검토 요청 양식과 함께 전송할 다음 필수 문서가 준비되어 있는지 확인하세요:
- 데이터 시트, 설계 가이드, 사용 설명서 및 기타 하드웨어 리소스와 같이 제품 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.