DAC8760
- Current output: 4 mA to 20 mA; 0 mA to 20 mA; 0 mA to 24 mA
- Voltage output:
- 0 V to 5 V; 0 V to 10 V; ±5 V; ±10 V
- 0 V to 5.5 V; 0 V to 11 V; ±5.5 V; ±11 V (10% overrange)
- ±0.1% FSR total unadjusted error (TUE) maximum
- DNL: ±1 LSB maximum
- Simultaneous voltage and current output
- Internal 5-V reference (10 ppm/°C, maximum)
- Internal 4.6-V power-supply output
- Reliability features:
- CRC check and watchdog timer
- Thermal alarm
- Open alarm, short current limit
- Wide temperature range: –40°C to 125°C
- Packages: 6-mm × 6-mm 40-pin VQFN and 24-pin HTSSOP
The DACx760 are precision, fully integrated, 12-bit and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices are programmable as a current output with a range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA; or as a voltage output with a range of 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V with a 10% overrange (0 V to 5.5 V, 0 V to 11 V, ±5.5 V, or ±11 V). Both current and voltage outputs can be simultaneously enabled while being controlled by one data register.
These devices include a power-on-reset function for powering up in a known state (both IOUT and VOUT are disabled and in a Hi-Z state). The CLR and CLR-SEL pins set the voltage outputs to zero-scale or midscale, and the current output to the low end of the range if the output is enabled. Zero and gain registers can be programmed to digitally calibrate the device in the end system. The output slew rate is also programmable by register. These devices can superimpose an external HART signal on the current output, and operate with either a single 10-V to 36-V supply, or dual supplies of up to ±18 V.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC8760EMC-EVM — DAC8760 향상된 평가 모듈
The DAC8760EMC-EVM (EMC enhanced evaluation module) provides an easy to use platform for evaluation of the performance and operating characteristics of the DAC8760 (16-bit, Voltage Output & Current Output DAC) in harsh industrial environments. The EVM is a complete evaluation kit that includes (...)
DAC8760EVM — DAC8760 16비트 프로그래머블 전류/전압 출력 DAC 평가 모듈
The DAC8760EVM (evaluation module) provides an easy to use platform for evaluation of the performance and operating characteristics of the DAC8760 (16-bit, Voltage Output & Current Output DAC). The EVM is a complete evaluation kit that includes a USB-based motherboard called the (...)
SBOC433 — DAC7760EVM and DAC8760EVM Software
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00118 — PLC용 16비트 아날로그 출력 모듈 레퍼런스 디자인
This reference design provides a complete 4-channel, 16-bit analog output module design for Programmable Logic Controllers (PLCs). It is designed and fully tested to meet IEC61000-4 EMC and surge requirements for industrial automation systems. The small form-factor design implements four 16-bit (...)
TIDA-00170 — 프로그래머블 로직 컨트롤러(PLC)용 16비트 아날로그 혼합 입력 및 출력 모듈 레퍼런스 디자인
The TIDA-00170 is a reference design for industrial control Analog Mixed Input Output Modules. The design implements four channel analog input & two channel analog output. The analog input channels can measure all standard industrial voltages up to ±10V and current inputs up to 24mA. The (...)
TIDA-00231 — 출력 채널 보호가 지원되는 PLC 아날로그 출력 모듈용 어댑티브 전원 공급 장치
TIDA-00231 is a reference design for an industrial Programmable Logic Controller (PLC) analog output module. The design provides a unique power saving solution for a digital-to-analog converter (DAC)-based analog current output module with an adaptive power supply. This adaptive power supply (...)
TIDA-00310 — 스마트 그리드 IED용 아날로그 입력, 출력 및 릴레이 드라이브 출력 모듈 레퍼런스 디자인
이 레퍼런스 디자인은 전압(5V ~ 10V DC) 또는 전류(4-20mA)와 같은 아날로그 IO를 사용하는 그리드의 다른 디바이스와 통신해야 하는 보호 릴레이 및 RTU와 같은 스마트 그리드 디바이스를 위한 유연한 아날로그 IO 솔루션을 제공합니다. 이 솔루션은 유형의 IO와 전원 디지털 릴레이 드라이브를 지원합니다. 이 모듈에서는 프로세서 간 통신을 위해 SPI 및 I2C 통신 인터페이스를 사용할 수 있습니다.
TIDA-00559 — 서지 보호 기능이 있는 결합 전압/전류 출력 레퍼런스 디자인
TIDA-00559는 산업용 센서 및 트랜스미터를 위한 범용 AO(아날로그 출력)를 제공합니다. 16비트 DAC를 기반으로 단일 출력을 사용합니다. 이 공통 출력은 0V~10V 또는 4mA~20mA로 사용자가 구성할 수 있습니다. IEC61000-4-5에 따라 최대 1kV/40Ω의 차동 모드 서지 펄스를 견디도록 설계된 전용 보호 회로 덕분에 거친 산업 환경에서 사용할 수 있습니다. 절연 디지털 인터페이스는 보드 구성 및 평가를 용이하게 합니다.
TIDA-00760 — PLC용 멀티플렉스 단일 채널 DAC를 지원하는 멀티 채널 아날로그 출력 모듈 레퍼런스 디자인
이 레퍼런스 설계는 순차적으로 멀티플렉싱된 샘플 앤 홀드 버퍼를 기반으로 하는 PLC(프로그래머블 로직 컨트롤러) 아날로그 출력 모듈 설계에 대해 저비용, 고속, 소형 폼 팩터 및 고해상도를 달성하는 데 도움이 됩니다.
TIPD119 — 산업용 애플리케이션의 아날로그 출력을 위한 전압 및 전류 출력 단자 레퍼런스 설계
이 검증된 레퍼런스 설계는 산업용 애플리케이션의 아날로그 출력을 위한 통합 전압 및 전류 출력 단자를 구현합니다. OPA192와 DAC8760을 결합하면 통합된 전압 및 전류 출력을 생성하여 전압 및 전류 출력 모두에 대한 단일 2단자 출력 커넥터를 사용할 수 있습니다. 이 설계 특징은 정밀 애플리케이션에 <0.1% 총 미조정 오류(TUE)입니다. 이 설계는 ISO7641FC 디지털 아이솔레이터를 사용하여 백플레인/호스트 컨트롤러에서 갈바닉 절연되었습니다.
TIPD153 — 싱글 채널 산업용 전압 및 전류 출력 드라이브, 절연, EMC/EMI 테스트 인증 레퍼런스 디자인
This TI CerTIfied Reference Design implements a isolated single-channel industrial voltage and current output module using the DAC8760 and ISO7641. The circuit features a digitally controlled voltage or current output that produces the standard outputs of 0-20mA, 0-24mA, 4-20mA, 0-5V, +/-5V, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
| HTSSOP (PWP) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.