DLP9000
- High Resolution 2560×1600 (WQXGA) Array
- > 4 Million Micromirrors
- 7.56-µm Micromirror Pitch
- 0.9-Inch Micromirror Array Diagonal
- ±12° Micromirror Tilt Angle (Relative to Flat State)
- Designed for Corner Illumination
- Integrated Micromirror Driver Circuitry
- Two High Speed Options
- DLP9000X With a Single DLPC910 Digital Controller
- 480 MHz Input Data Clock Rate
- Up to 61 Giga-Bits Per Second (with Continuous Streaming Input Data)
- Up to 14989 Hz (1-Bit Binary Patterns)
- Up to 1873 Hz (8-Bit Gray Patterns With Illumination Modulation)
- DLP9000 with Dual DLPC900 Digital Controllers
- 400 MHz Input Data Clock Rate
- Up to 38 Giga-Bits per Second (With Up to 400 Pre-Stored Binary Patterns)
- Up to 9523 Hz (1-Bit Binary Patterns)
- Up to 1031 Hz (8-Bit Gray Patterns Pre- Loaded With Illumination Modulation), External Input Up to 360 Hz
- Designed for Use With Broad Wavelength Range
- 400 nm to 700 nm
- Window Transmission 95% (Single Pass, Through Two Window Surfaces)
- Micromirror Reflectivity 88%
- Array Diffraction Efficiency 86%
- Array Fill Factor 92%
Featuring over 4 million micromirrors, the high resolution DLP9000 and DLP9000X digital micromirror devices (DMDs) are spatial light modulators (SLMs) that modulate the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The streaming nature of the DLP9000X and its DLPC910 controller enable very high speed continuous data streaming for lithographic applications. Both DMDs enable large build sizes and fine resolution for 3D printing applications. The high resolution provides the direct benefit of scanning larger objects for 3D machine vision applications.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLPLCR90EVM — DLP® 0.90인치, WQXGA, Type A DMD(디지털 마이크로미러 디바이스) 평가 모듈
이 DLP 평가 모듈(EVM)에는 7.56-µm 피치의 2560 x 1600 마이크로미러가 포함된 0.9인치 2xLVDS DMD(디지털 마이크로미러 디바이스)인 DLP9000가 포함되어 있습니다. DLPLCRC900DEVM과 결합하면 사용자는 최대 9,523Hz의 1비트 패턴 속도로 픽셀 단위로 정확한 제어를 수행할 수 있습니다.
DLPLCR90EVM은 DLP 기술을 다양한 조명 스티어링 애플리케이션에 통합하기 위한 매우 유연한 개발 키트를 필요로 하는 설계자에게 적합한 평가 선택입니다. 이 EVM은 DLP 고속 가시 제품군의 (...)
DLPLCRC900EVM — DLP® LightCrafter™ 싱글 DLPC900 평가 모듈
이 DLP 평가 모듈(EVM)에는 DLPC900 DMD(디지털 마이크로미러 디바이스) 컨트롤러 1개가 포함되어 있어 DLPLCR65EVM 및 기타 호환 DMD EVM의 구성 가능한 제어가 가능합니다. 카메라, 센서 또는 기타 주변 장치와 편리하게 동기화할 수 있는 입력 /출력 트리거를 제공합니다. 추가된 유연성으로 산업용, 의료용, 계측, 보안, 통신 및 계측 애플리케이션을 위한 다양한 아키텍처가 가능합니다.
DLPLCRC900EVM은 DLP 기술을 다양한 조명 스티어링 애플리케이션에 통합하기 위한 매우 유연한 개발 키트를 필요로 (...)
INV-3P-TWOWAVE — 2채널 병렬 또는 순차 광 노출을 위한 In-Vision Twowave DLP9000 조명 엔진 모듈
In-Vision’s Twowave DLP light engine module offers native WQXGA/2K (2560 x 1600 pixels) resolution based on the DLP9000 advanced light control chipset. It combines 2 LEDs with 1 DMD and allows for parallel or sequential light exposure at different wavelengths (365nm and 460nm).
DLI-3P-DLI9000 — DLP9000용 DLi 3DLP9000 조명 엔진
VISI-3P-LRS-WQ — Visitech LUXBEAM Rapid System WQ
The LUXBEAM® Rapid System LRS-WQ is a DLP® technology based stereo lithography sub-system specifically designed for professional 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9000 WQXGA chip, the LRS-WQ offers long lifetime and low (...)
INV-3P-FIREBIRD — DLP9000용 In-Vision Firebird, 고해상도 3D 프린터 조명 엔진
In-Vision의 Firebird 광학 모듈은 2560x1600 픽셀의 기본 해상도와 7.6 µm의 마이크로미러 피치 크기로 DLP9000을 지원합니다. 딥 블루 LED 조명에 최적화. Firebird는 높은 픽셀 해상도와 뛰어난 광학 성능을 갖춘 구조화된 경량 애플리케이션플을 지원합니다. 프로젝션 장치에는 개별 응용 분야의 요구 사항을 충족하기 위해 교환 가능한 렌즈 어셈블리의 여러 옵션이 있습니다. In-Vision은 맞춤형 렌즈 솔루션을 설계하고 제조할 수도 있습니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 (...)
INV-3P-HELIOS — In-Vision Helios, DLP9000을 사용하는 적층 가공 조명 엔진
DLP® 기술 기반 3D 프린팅을 위해 설계된 Helios는 In-Vision의 새로운 독점 고전력 조명 모듈과 고성능 광학 부품을 결합했습니다. TI의 DLP9000을 기반으로 하는 Helios는 최대 12W의 출력 전력을 제공하며, 비용 효율적인 인화에 기여하고, 새로운 재료에 기반한 애플리케이션을 지원하고, 직렬 생산을 위한 적층 가공을 검증할 것입니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 기타 산업용 및 과학 애플리케이션.
DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle
텍사스 인스트루먼트는 개발자에게 DLP LightCrafter 6500 및 DLP LightCrafter 9000 EVM의 유연성과 고급 제어 기능을 제공하는 무료 소프트웨어와 펌웨어 다운로드를 제공합니다. 레퍼런스 설계 문서를 통해 고객은 DLP6500 및 DLP9000 칩셋 기반의 맞춤형 제품을 개발할 수 있습니다.
이 번들에는 다음 구성 요소가 포함되어 있습니다:
- DLPC900REF-GUI: 소프트웨어 번들에는 DLPC900 컨트롤러와 USB로 쉽게 통신할 수 있도록 PC 기반 그래픽 사용자 인터페이스(GUI)의 실행 파일이 (...)
DLPR900PROM — DLPC900 Configuration and Support Firmware
The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)
DLPM064 — DLP9000/9000X/9000XUV DMD With FLS Package (Type-A) 3D-CAD Geometry
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
DLI-3P-ACCESSORIES — DLP® 제품용 DLi 액세서리 및 어셈블리
- (...)
DLPR106 — TypeA 9Size Traditional DMD Mounting and Electrical Interconnect Information
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-TYPEA.9 (FLS) | 355 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.