DLP6500FLQ
- High Resolution 1080p (1920×1080) Array With >2 Million Micromirrors
- 0.65-Inch Micromirror Array Diagonal
- 7.56 µm Micromirror Pitch
- ±12° Micromirror Tilt Angle (Relative to Flat State)
- Designed for Corner Illumination
- Designed for Use With Broadband Visible Light (400 nm – 700 nm)
- Window Transmission 97% (Single Pass, Through Two Window Surfaces)
- Micromirror Reflectivity 88%
- Array Diffraction Efficiency 86%
- Array Fill Factor 92%
- Two 16-Bit, Low Voltage Differential Signaling (LVDS), Double Data Rate (DDR) Buses
- Two Dedicated Controller Options at 400 MHz Input Data Clock Rate
- DLPC900 Digital Controller
- Up to 9523 Hz (1-Bit Binary Patterns)
- Up to 19.7 Giga-bits Per Second (1-Bit Binary Patterns)
- Up to 1031 Hz (8-Bit Gray Patterns Pre-Loaded With Illumination Modulation), External Input Up to 360 Hz
- DLPC910 Digital Controller
- Up to 11574 Hz (1-Bit Binary Patterns)
- Up to 24 Giga-bits Per Second (1-Bit Binary Patterns)
- Up to 1446 Hz (8-Bit Gray Patterns With Illumination Modulation)
- Integrated Micromirror DriverCircuitry
- Hermetic Package
Featuring over 2 million micromirrors in a hermetic package, the high resolution 0.65 1080p digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. The unique capability and value offered by the DLP6500, including operation at 405nm, makes it well suited to support a wide variety of industrial, medical, and advanced imaging applications. Reliable function and operation of the DLP6500 requires that it be used in conjunction with the DLPC900 or the DLPC910 digital controllers. This dedicated chipset provides full HD resolution at high speeds and can be easily integrated into a variety of end equipment solutions.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLPLCR65FLQEVM — 0.65인치, 1080p, Type-A DLP® DMD(디지털 마이크로미러 디바이스)용 DLP6500FLQ 평가 모듈
DLPLCR65FLQEVM에는 7.56µm 피치의 1920x1080 마이크로미러를 포함하는 0.65 1080p Type A DMD인 DLP6500FLQ가 탑재되어 있습니다. DLPLCRC910EVM과 함께 사용하면 1비트 패턴의 고속 픽셀 정확도 제어가 가능합니다. 이 플랫폼은 고급 패턴 및 이미징 애플리케이션을 위한 유연성과 고속 기능을 제공합니다.
DLI-3P-DLI6500 — DLP6500용 DLi6500 1080p 개발 키트
VIALUX-3P-SUPER-910 — DLPC910용 ViALUX SuperSpeed V 모듈
ViALUX’ SuperSpeed v-모듈은 DLPC910, 디지털 마이크로미러 디바이스(DLP6500FLQ 또는 DLP9000X) 및 ALP-4 컨트롤러 제품군 소프트웨어가 포함된 완전한 서브시스템을 제공합니다. 산업용 등급 모듈은 즉시 고성능 픽셀 레벨 제어를 지원합니다. 새로운 최신 애플리케이션을 위해 설계된 이러한 DLP 서브시스템에는 다양한 기능을 갖춘 프로그래밍 인터페이스가 있어 짧은 제품 출시를 지원합니다.
DMD 보드의 소형 설계는 플렉스 케이블 연결을 1개가 아닌 두 개의 PCB 에지에 결합하여 조립 공간을 (...)
INV-3P-IKARUS — DLP6500용 In-Vision IKARUS 풀 HD II, 적층 가공 조명 엔진
In-Vision의 Ikarus II는 3D 프린팅 애플리케이션을 위해 파란색 파장 조명을 사용하는 조명 엔진 모듈 제품군 중 하나입니다. DLP6500 칩셋에 기반을 둔 Ikarus II는 광학 성능 저하 없이 비용 효율적인 솔루션을 제공합니다. 다양한 기성품 프로젝션 렌즈를 즉시 사용할 수 있습니다. 또한 In-Vision의 엔지니어링 및 제조 팀은 짧은 리드 타임에 특정 파장 또는 초점 비율을 위해 사용자 지정 렌즈 또는 조명 시스템 설계를 제공합니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 기타 산업용 및 (...)
INV-3P-MERCURY — In-Vision Mercury, DLP6500 기반 3D 계측 조명 엔진
Designed for 3D metrology, scanning and mapping applications, the Mercury light engine is based on TI’s DLP6500 chipset and projects patterns with a resolution of 1440x1080 pixels and an aspect ratio of 4:3. The optical system offers a high depth-of-field, low distortion as well as high MTF values.
VIALUX-3P-DLP6500FLQ-I — DLP6500FLQ을 사용하는 산업용 ViALUX GmbH 광학 모듈
VIALUX-3P-STAR-065 — DLP6500용 ViALUX STAR-065 광학 모듈
Refer to the ordering links below for (...)
WDST-3P-PRO6500 — Wintech PRO6500 생산 준비가 된 광학 엔진
DLP-ALC-LIGHTCRAFTER-SDK — LightCrafter™ 시리즈 컨트롤러용 DLP® 고급 조명 제어 SDK
This DLP® Software Development Kit (SDK) supports the DLPC900 controller used in multiple DLP Advanced Light Control LightCrafter™ series evaluation modules. The SDK provides APIs to integrate DLP technology with cameras to create 3D machine vision or 3D printer solutions for a variety of (...)
DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle
텍사스 인스트루먼트는 개발자에게 DLP LightCrafter 6500 및 DLP LightCrafter 9000 EVM의 유연성과 고급 제어 기능을 제공하는 무료 소프트웨어와 펌웨어 다운로드를 제공합니다. 레퍼런스 설계 문서를 통해 고객은 DLP6500 및 DLP9000 칩셋 기반의 맞춤형 제품을 개발할 수 있습니다.
이 번들에는 다음 구성 요소가 포함되어 있습니다:
- DLPC900REF-GUI: 소프트웨어 번들에는 DLPC900 컨트롤러와 USB로 쉽게 통신할 수 있도록 PC 기반 그래픽 사용자 인터페이스(GUI)의 실행 파일이 (...)
DLPR900PROM — DLPC900 Configuration and Support Firmware
The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)
DLPC910REF-SW — DLPC910 reference software for the DLPLCRC910EVM
DLP-FLQ-2509321-3D-DMD — FLQ 패키지(7Type-A) 3D-CAD 지오메트리를 지원하는 DLP6500 DMD
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
DLPR110 — DLPLCR65FLQEVM Design Files
DLI-3P-ACCESSORIES — DLP® 제품용 DLi 액세서리 및 어셈블리
- (...)
DLP-7TYPEA-203I-MOUNTING — TypeA 7Size DMD(203i) 장착 및 전기적 상호 연결 정보
TIDA-00362 — DLP® 기술을 사용한 공장 자동화를 위한 고해상도 3D 스캐너
The Factory Automation reference design employs the Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) technology (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-TYPEA.7 (FLQ) | 203 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.