홈 모터 드라이버 브러시리스 DC(BLDC) 모터 드라이버 BLDC 드라이버
홈
모터 드라이버
브러시리스 DC(BLDC) 모터 드라이버
BLDC 드라이버

DRV3203E-Q1

구형

오토모티브 안전 애플리케이션용 3상 모터 드라이버 IC

지금 주문
데이터 시트

DRV3203E-Q1

구형
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Architecture Gate driver Operating temperature range (°C) to
Rating Automotive Architecture Gate driver Operating temperature range (°C) to
HTQFP (PHP) 48 81 mm² 9 x 9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 0: –40°C to 150°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C2
  • 3-Phase Pre-Drivers for N-Channel MOS Field-Effect Transistors (MOSFETs)
  • Pulse-Width Modulation (PWM) Frequency up to 20 kHz
  • Fault Diagnostics
  • Charge Pump
  • Phase Comparators
  • Microcontroller (MCU) Reset Generator
  • Serial Port I/F (SPI)
  • Motor-Current Sense
  • 3.3-V Regulator
  • Low-Current Sleep Mode
  • Operation VB Range From 5.3 to 26.5 V
  • 48-Pin PHP

All trademarks are the property of their respective owners.

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 0: –40°C to 150°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C2
  • 3-Phase Pre-Drivers for N-Channel MOS Field-Effect Transistors (MOSFETs)
  • Pulse-Width Modulation (PWM) Frequency up to 20 kHz
  • Fault Diagnostics
  • Charge Pump
  • Phase Comparators
  • Microcontroller (MCU) Reset Generator
  • Serial Port I/F (SPI)
  • Motor-Current Sense
  • 3.3-V Regulator
  • Low-Current Sleep Mode
  • Operation VB Range From 5.3 to 26.5 V
  • 48-Pin PHP

All trademarks are the property of their respective owners.

The DRV3203E-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For commutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and comparator in a battery common-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI.

The DRV3203E-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For commutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and comparator in a battery common-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI.
filter 기타 BLDC 드라이버 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet DRV3203E-Q1 Three-Phase Brushless Motor Driver datasheet (Rev. B) PDF | HTML 2016/07/13

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치