DRV8000-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Compliant Targeted
- Developed for functional safety applications
- Documentation to aid ISO26262 system design
- Systematic integrity up to ASIL D
- Hardware integrity up to ASIL B
- 5V to 35V (40V abs. max) operating range
- H-bridge or dual-channel half-bridge gate drivers
- Smart gate drive architecture
- Tripler charge pump for 100% PWM
- Wide common mode current shunt amplifier
- 1 Integrated half-bridge with IOUT max 8A (RDSON HS +LS FET = 155mΩ)
- 1 Integrated half-bridge with IOUT max 7A (RDSON HS +LS FET = 185mΩ)
- 2 Integrated half-bridges with IOUT max 4A (RDSON HS +LS FET = 440mΩ)
- 2 Integrated half-bridges with IOUT max 1.3A load (RDSON HS +LS FET = 1540mΩ)
- 1 Configurable integrated high-side driver as lamp or LED driver with IOUT Max 1.5/0.5A (RDSON = 0.4/1.2Ω)
- 5 Configurable integrated high-side drivers for 0.5/0.25A load (RDSON = 1.2Ω)
- 1 External MOSFET gate driver for charge of electrochromic glass
- 1 Integrated low-side FET for discharge of electrochromic glass
- Internal 10bit PWM generator for high-side drivers
- All high-side drivers support a low- or high- current threshold constant current mode to drive a wide range of LED modules
- 1 external MOSFET gate driver for heater
- Offline open load detection
- VDS monitoring of low RDSON MOSFET for short-circuit detection
- Integrated driver output features current regulation (ITRIP)
- Muxable sense output (IPROPI)
- Internal current sensing with proportional current output (IPROPI)
- Advanced die temperature monitoring with multiple thermal clusters
- Motor supply voltage monitor
- Protection and diagnostic features with configurable fault behavior
- Load diagnostics in both the off-state and on-state to detect open load and short-circuit
- Overcurrent and over temperature protection
- Device Comparison Table
The DRV8000-Q1 device integrates multiple door control specific functions: driving and diagnosing motor (inductive), resistive and capacitive loads, driving a lamp or LEDs, drive MOSFETs for special loads such as heating element or electrochromic elements. These drivers include protection features for offline and active diagnostics such as under and over voltage monitors, offline open load and short-circuit diagnostics, and zone-based thermal monitoring and shutdown protection. The device features two half-bridge gate drivers, 6 integrated half-bridges (2 high-side alternate modes), 6 integrated high-side drivers, one external high-side gate driver for heater, one external high-side gate driver for electrochromic charge and one integrated low-side driver for electrochromic load discharge. The half-bridge, high-side, heater and gate drivers have PWM input control configuration, sensing, diagnostics and device system protection. There is a dedicated internal programmable PWM generators for each high-side driver. Proportional current sense pin output is available for all integrated drivers, along with a robust and flexible current shunt amplifier for the gate driver.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8000-Q1 Automotive Highly-Integrated, Multifunction Driver for Door Control datasheet (Rev. B) | PDF | HTML | 2026/01/14 |
| Application brief | Automotive Door Electronics Architectures | PDF | HTML | 2026/01/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8000-Q1EVM — DRV8000-Q1 평가 모듈
DRV8000-Q1 평가 모듈(EVM)을 사용하면 DRV8000-Q1 장치를 쉽게 평가할 수 있습니다. EVM은 개봉 후 즉시 작동되고 즉시 부하를 구동하도록 프로그래밍되어 있습니다. 이 EVM은 하프 브리지 게이트 드라이버, 통합 하프 브리지 6개, 통합 고압측 드라이버 6개, 히터용 외부 고압측 게이트 드라이버 1개, 전기변색 충전을 위한 외부 고압측 게이트 드라이버 1개, 전기변색 부하 방전을 위한 통합 저압측 드라이버 1개를 제공하는 통합 드라이버를 보여줍니다. 이 장치는 저전압 및 과전압 모니터, 오프라인 개방 부하 및 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.