DRV8823-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified with the Following Results:
- Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range - Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4B
- Device Temperature Grade 1: –40°C to 125°C
- PWM Motor Driver with Four H-Bridges
- Drives Two Stepper Motors, One Stepper and
Two DC Motors, or Four DC Motors - Up to 1.5-A Current Per Winding
- Low On-Resistance
- Programmable Maximum Winding Current
- Three-Bit Winding Current Control Allows up to
Eight Current Levels - Selectable Slow or Mixed Decay Modes
- Drives Two Stepper Motors, One Stepper and
- 8-V to 32-V Operating Supply Voltage Range
- Internal Charge Pump for Gate Drive
- Built-in 3.3-V Reference
- Serial Digital Control Interface
- Fully Protected Against Undervoltage,
Overtemperature, and Overcurrent - Thermally-Enhanced Surface Mount Package
The DRV8823-Q1 device provides an integrated motor driver solution for printers and other office automation equipment applications.
The motor driver circuit includes four H-bridge drivers. Each of the motor driver blocks employ N-channel power MOSFETs configured as an H-bridge to drive the motor windings.
A simple serial interface allows control of all functions of the motor driver with only a few digital signals. A low-power sleep function is also provided.
The motor drivers provide PWM current control capability. The current is programmable, based on an externally supplied reference voltage and an external current sense resistor. In addition, eight current levels (set through the serial interface) allow microstepping with bipolar stepper motors.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.
The DRV8823-Q1 is packaged in a 48-pin HTSSOP package (Eco-friendly: RoHS and no Sb/Br).
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8823-Q1 4-Bridge Serial Interface Motor Driver datasheet (Rev. C) | PDF | HTML | 2014. 10. 29 | |
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 | ||
| 애플리케이션 노트 | Current Recirculation and Decay Modes (Rev. A) | PDF | HTML | 2021. 4. 20 | ||
| 애플리케이션 노트 | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021. 1. 19 | ||
| 애플리케이션 노트 | Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) | 2019. 2. 19 | |||
| 애플리케이션 노트 | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018. 7. 6 | |||
| 추가 자료 | TM4C123x Stepper Motor Control Product Summary | 2015. 7. 6 | |||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004. 5. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8823EVM — DRV8823 평가 모듈
The DRV8823 is a quad H-Bride motor driver that supports DC and stepper motor drive applications and includes device, cabling and software to ease the evaluation of the device when driving a customer's motor.
SLVC423 — DRV8821, DRV8823 Software
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCA) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.