DS90UB933-Q1
- AEC-Q100 qualified for automotive applications with the following results:
- Device temperature grade 2: –40°C to +105°C ambient operating temperature
- 37.5-MHz to 100-MHz input pixel clock support
- Robust Power-Over-Coaxial (PoC) operation
- Programmable data payload:
- 10-Bit payload up to 100-MHz
- 12-Bit payload up to 100-MHz
- Continuous low latency bidirectional control interface channel with I2C support at 400-kHz
- Embedded clock with DC-balanced coding to support AC-coupled interconnects
- Capable of driving up to 15-m coaxial or Shielded Twisted-Pair (STP) cables
- 4 Dedicated General-Purpose Input/Output (GPIO)
- 1.8-V, 2.8-V or 3.3-V compatible parallel inputs on serializer
- Single power supply at 1.8-V
- ISO 10605 and IEC 61000-4-2 ESD compliant
The DS90UB933-Q1 device offers an FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair. The DS90UB933-Q1 device incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths. The serializer/deserializer pair is targeted for connections between imagers and video processors in an electronic control unit (ECU). This device is ideally suited for driving video data requiring up to 12-bit pixel depth plus two synchronization signals along with bidirectional control channel bus.
Using TI’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical-bidirectional control channel information. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce PCB layers, cable width, and connector size and pins. Internal DC-balanced encoding/decoding is used to support AC-coupled interconnects.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DS90UB933-Q1 FPD-Link III Serializer for 1-MP/60-fps Cameras 10/12 Bits,100 MHz datasheet (Rev. E) | PDF | HTML | 2020. 11. 4 | |
| 기술 문서 | Next-generation FPD-Link III devices add speed and flexibility to Advanced Driver | PDF | HTML | 2017. 10. 18 | ||
| 애플리케이션 노트 | I2C Communication over DS90UB913/4 FPD Link-III with BCC | 2013. 4. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DS90UB933-Q1EVM — STP 또는 동축 케이블용 100MHz 12비트 DS90UB933-Q1 FPD-Link III 시리얼라이저 평가 모듈
ALP — Analog LaunchPad Framework Utility
ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software
TIDA-01004 — 1M 픽셀 이미저, Bayer 비디오 출력 및 Power over Coax를 지원하는 차량용 카메라 모듈 레퍼런스 디자인
TIDA-01392 — 최대 100MHz PCLK의 12비트 원시 비디오 출력을 지원하는 오토모티브 1.3MP 카메라 모듈 레퍼런스 디자인
TIDA-050050 — MIPI CSI-2 인터페이스, PMIC, FPD-Link를 지원하는 차량용 1.3MP 카메라 모듈 레퍼런스 설계
이 카메라 모듈 레퍼런스 설계는 통합 이미지 신호 프로세서(ISP)를 갖춘 1.3메가픽셀 이미저와 12비트, 100MHz TI FPD-Link III 시리얼라이저와 결합하여 차량용 운전자 보조 시스템(ADAS)의 소형 저비용 카메라에 대한 요구 사항을 해결합니다. 또한 초소형 폼 팩터로 두 장치 모두에 전원 관리 집적 회로(PMIC) 전원 공급 장치를 제공합니다.
이 설계에는 데이터와 전원을 모두 전송하는 동축 케이블을 사용하여 원격 차량용 카메라 모듈을 디스플레이 또는 머신 비전 프로세싱 시스템에 연결하는 고속 직렬 인터페이스가 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTV) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.