홈 전력 관리 DC/DC switching regulators DC/DC converters
홈
전력 관리
DC/DC switching regulators
DC/DC converters

LM2678

활성

효율이 높은 8V~40V, 5A의 SIMPLE SWITCHER® 벅 컨버터

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR51450 활성 36V, 5A 동기식 벅 컨버터 Next-generation synchronous buck converter in ultra-small WSON package.
TLVM13660 활성 5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~6V 출력, 6A 전원 모듈 Save board space, simplify design and speed time to market with an integrated-inductor power module.

LM2678

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 40 Vin (min) (V) 8 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0042 Duty cycle (max) (%) 91
Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 40 Vin (min) (V) 8 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0042 Duty cycle (max) (%) 91
TO-220 (NDZ) 7 82.6008 mm² 10.16 x 8.13 TO-263 (KTW) 7 153.924 mm² 10.1 x 15.24 VSON (NHM) 14 30 mm² 6 x 5
  • Efficiency up to 92%
  • Simple and easy to design using off-the-shelf external components
  • 120mΩ DMOS output switch
  • 3.3V, 5V, and 12V fixed output and adjustable (1.2V to 37V) versions
  • 50µA standby current when switched OFF
  • ±2% maximum output tolerance over full line and load conditions
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • −40 to 125°C operating junction temperature range
  • Create a custom design using the LM2678 with the WEBENCH Power Designer
  • Efficiency up to 92%
  • Simple and easy to design using off-the-shelf external components
  • 120mΩ DMOS output switch
  • 3.3V, 5V, and 12V fixed output and adjustable (1.2V to 37V) versions
  • 50µA standby current when switched OFF
  • ±2% maximum output tolerance over full line and load conditions
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • −40 to 125°C operating junction temperature range
  • Create a custom design using the LM2678 with the WEBENCH Power Designer

The LM2678 series of regulators are monolithic, integrated circuits, which provide all of the active functions for a step-down (buck) switching regulator capable of driving up to 5A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance DMOS power switch. The series consists of fixed output voltages of 3.3V, 5V, and 12V and an adjustable output version.

The SIMPLE SWITCHER power converter concept provides for a complete design using a minimum number of external components. A high fixed frequency oscillator (260kHz) allows the use of physically smaller sized components. A family of standard inductors for use with the LM2678 are available from several manufacturers to greatly simplify the design process.

The LM2678 series also has built-in thermal shutdown, current limiting, and an ON and OFF control input that can power down the regulator to a low 50µA quiescent current standby condition. The output voltage is specified to a ±2% tolerance. The clock frequency is controlled to within a ±11% tolerance.

The LM2678 series of regulators are monolithic, integrated circuits, which provide all of the active functions for a step-down (buck) switching regulator capable of driving up to 5A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance DMOS power switch. The series consists of fixed output voltages of 3.3V, 5V, and 12V and an adjustable output version.

The SIMPLE SWITCHER power converter concept provides for a complete design using a minimum number of external components. A high fixed frequency oscillator (260kHz) allows the use of physically smaller sized components. A family of standard inductors for use with the LM2678 are available from several manufacturers to greatly simplify the design process.

The LM2678 series also has built-in thermal shutdown, current limiting, and an ON and OFF control input that can power down the regulator to a low 50µA quiescent current standby condition. The output voltage is specified to a ±2% tolerance. The clock frequency is controlled to within a ±11% tolerance.
filter 기타 DC/DC converters 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
21개 모두 보기
유형 직함 날짜
* Data sheet LM2678 SIMPLE SWITCHER Power Converter, High-Efficiency, 5A, Step-Down Voltage Regulator datasheet (Rev. L) PDF | HTML 2025/06/25
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
Technical article Quantifying the value of wide VIN PDF | HTML 2016/06/15
Technical article DC/DC converter datasheets – System losses demystified PDF | HTML 2016/04/25
Technical article DC/DC converter datasheets – System efficiency demystified PDF | HTML 2016/04/18
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
Application note AN-1187 Leadless Leadframe Package (LLP) (Rev. R) 2013/05/07
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-1Positive-to-Negative Buck-Boost Converter Using LM267x SIMPLE SWITCHER (Rev. E) 2013/04/23
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
Application note Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007/03/21
Application note Input and Output Capacitor Selection 2005/09/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

LM2678 Unencrypted PSpice Average Model

SNVM879.ZIP (1 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM2678 Unencrypted PSpice Average Model Package (Rev. A)

SNVM039A.ZIP (56 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM2678 Unencrypted PSpice Transient Model

SNVM880.ZIP (3 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM2678 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM038A.ZIP (63 KB) - PSpice Model
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TO-220 (NDZ) 7 Ultra Librarian
TO-263 (KTW) 7 Ultra Librarian
VSON (NHM) 14 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상