LM3668
- 45-µA Typical Quiescent Current
- For 2.8-V-3.3-V and 3-V-3.4-V Versions:
- 1-A Maximum Load Current for
VIN = 2.8 V to 5.5 V - 800-mA Maximum Load Current for
VIN = 2.7 V - 600-mA Maximum Load Current for
VIN = 2.5 V
- 1-A Maximum Load Current for
- For 4.5 V-5 V
- 1-A Maximum Load Current for
VIN = 3.9 V to 5.5 V - 800-mA Maximum Load Current for
VIN = 3.4 V to 3.8 V - 700-mA Maximum Load Current for
VIN = 3 V to 3.3 V - 600-mA Maximum Load Current for
VIN = 2.7 V to 2.9 V
- 1-A Maximum Load Current for
- 2.2-MHz PWM Fixed Switching Frequency
(Typical) - Automatic PFM-PWM Mode or Forced PWM
Mode - Wide Input Voltage Range: 2.5 V to 5.5 V
- Internal Synchronous Rectification for High
Efficiency - Internal Soft Start: 600-µs Maximum Start-Up
Time After VIN Settled - 0.01-µA Typical Shutdown Current
- Current Overload and Thermal Shutdown
Protection - Frequency Sync Pin: 1.6 MHz to 2.7 MHz
The LM3668 is a synchronous buck-boost DC-DC converter optimized for powering low voltage circuits from a Li-Ion battery and input voltage rails between 2.5 V and 5.5 V. It has the capability to support up to 1-A output current over the output voltage range. The LM3668 regulates the output voltage over the complete input voltage range by automatically switching between buck or boost modes depending on the input voltage.
The LM3668 has 2 N-channel MOSFETS and 2 P-channel MOSFETS arranged in a topology that provides continuous operation through the buck and boost operating modes. There is a MODE pin that allows the user to choose between an intelligent automatic PFM-PWM mode operation and forced PWM operation. During PWM mode, a fixed-frequency 2.2 MHz (typical) is used. PWM mode drives load up to 1 A. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 45 µA (typical) at light loads during system standby. Internal synchronous rectification provides high efficiency. In shutdown mode (EN pin pulled low), the device turns off and reduces battery consumption to 0.01 µA (typical).
A high switching frequency of 2.2 MHz (typical) allows the use of tiny surface-mount components including a 2.2-µH inductor, a 10-µF input capacitor, and a 22-µF output capacitor.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM3668 1-A, High-Efficiency Dual-Mode Single-Inductor Buck-Boost DC-DC Converter datasheet (Rev. O) | PDF | HTML | 2015. 4. 23 | |
| 애플리케이션 노트 | Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) | PDF | HTML | 2021. 6. 9 | ||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM3668 4.5/5V Unencrytped PSpice Transient Model Package (Rev. A)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DQB) | 12 | Ultra Librarian |