OPA2863
- Wide-bandwidth
- Unity-gain bandwidth: 110-MHz (A V= 1 V/V)
- Gain-bandwidth product: 50-MHz
- Low power
- Quiescent current: 700-µA/ch (typical)
- Power down mode: 1.5-µA (maximum, V S= 3 V)
- Supply voltage: 2.7-V to 12.6-V
- Input voltage noise: 5.9-nV/√Hz
- Slew rate: 105-V/µs
- Rail-to-rail input and output
- HD 2/HD 3: –129 dBc/–138 dBc at 20 kHz (2-V PP)
- Operating temperature range: –40°C to +125°C
- Additional features:
- Overload power limit
- Output short-circuit protection
- High-precision version: OPAx863A
The OPAx863 devices are low-power, unity-gain stable, rail-to-rail input and output, voltage-feedback operational amplifiers designed to operate over a power-supply range of 2.7 V to 12.6 V. Consuming only 700 µA per channel, the OPAx863 offers a gain-bandwidth product of 50 MHz, slew rate of 105 V/µs with a voltage noise density of 5.9 nV/√Hz.
The rail-to-rail input stage with 2.7-V supply operation is useful in portable, battery-powered applications. The rail-to-rail input stage is well-matched for gain-bandwidth product and noise across the full input common‑mode voltage range, enabling excellent performance with wide-input dynamic range. The OPAx863 feature a power-down (PD) mode with a PD quiescent current (I Q) of 1.5-µA (maximum) and a turn-on or turn-off time within 6.5-µs using a 3-V supply.
The OPAx863 includes overload power limiting to limit the increase in I Q with saturated outputs, thereby preventing excessive power dissipation in power-conscious, battery-operated systems. The output stage is short-circuit protected, making these devices conducive to ruggedized environments.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input/Output Voltage-Feedback Op Amps datasheet (Rev. J) | PDF | HTML | 2023. 6. 14 | |
| Circuit design | Circuit for driving high-voltage SAR ADC with a buffered instrumentation (Rev. A) | PDF | HTML | 2024. 9. 20 | ||
| Circuit design | Inverting circuit for high-to-low voltage level translation to drive ADC (Rev. A) | PDF | HTML | 2024. 9. 19 | ||
| Circuit design | Driving a low-voltage single-ended SAR ADC circuit with high-voltage input (Rev. A) | PDF | HTML | 2024. 9. 19 | ||
| Application brief | How to Design MFB Filters with Amplifier Bandwidth Limitations | PDF | HTML | 2024. 1. 4 | ||
| Application brief | Higher accuracy using an external amplifier in ultrasonic flow measurement | 2019. 2. 5 | |||
| 설계 가이드 | High-Speed, High-Side Current Sense Reference Design | 2017. 7. 19 | |||
| 애플리케이션 노트 | ADC Input Protection | 2013. 9. 4 | |||
| 사용 설명서 | DEM-OPA-MSOP-2A User's Guide (Rev. A) | 2006. 5. 25 | |||
| 애플리케이션 노트 | A Walk Along the Signal Path (High-Speed Signal Path) | 2005. 3. 30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-DSN-EVM — DSN 패키지에서 듀얼 OP AMP용 평가 모듈
DEM-OPA-DSN-EVM 평가 모듈(EVM)은 설계자가 텍사스 인스트루먼트사의 고속 광대역 연산 증폭기의 작동 및 성능을 평가할 수 있도록 설계된 데모 장치입니다. 채워지지 않은 이 PC 보드는 10핀 SON(DSN) 패키지에서 제공되는 듀얼 채널 증폭기 제품과 호환됩니다. 이 EVM은 유연성과 사용 편의성을 극대화해 다양한 증폭기 구성을 수용할 수 있도록 설계했습니다.
DEM-OPA-MSOP-2A — MSOP-8 패키지용 듀얼 연산 증폭기 평가 모듈
For more information on these types of op amps, (...)
DEM-OPA-RUN-EVM — RUN 패키지의 듀얼 채널 연산 증폭기용 비실장 평가 모듈
DEM-OPA-SO-2A — SO-8 패키지용 듀얼 연산 증폭기 평가 모듈
The DEM-OPA-SO-2A demonstration evaluation module helps designers evaluate the operation and performance of TI dual-channel, high-speed, wideband operational amplifiers. This unpopulated printed-circuit board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.
For more (...)
OPA2863DGKEVM — DGK 패키지의 듀얼 저전력 12V RRIO 전압 피드백 증폭기용 OPA2863 평가 모듈
OPA2863DGKEVM은 DGK(VSSOP-8) 패키지의 듀얼 채널 OPA2863 증폭기를 위한 평가 모듈(EVM)입니다. OPA2863은 2.7V ~ 12.6V의 전원 공급 범위에서 작동하도록 설계된 저전력, 유니티 게인 안정, 레일 투 레일 입출력(RRIO), 전압 피드백 연산 증폭기입니다. OPA2863DGKEVM은 증폭기의 기능과 다기능성을 쉽고 빠르게 시연할 수 있도록 설계되었습니다. EVM은 온보드 커넥터를 사용하여 전원, 신호 소스 및 테스트 기기에 연결할 수 있습니다. EVM은 입력 및 출력에서 일반적인 50Ω (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| WQFN (RUN) | 10 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |