OPA325

활성

저잡음(10nV/rtHz), 광대역(10MHz), 저전력(0.65mA), 제로 크로스오버 연산 증폭기

제품 상세 정보

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 0.15 Offset drift (typ) (µV/°C) 2 Input bias current (max) (pA) 10 GBW (typ) (MHz) 10 Features Zero Crossover Slew rate (typ) (V/µs) 5 Rail-to-rail In, Out Iq per channel (typ) (mA) 0.65 Vn at 1 kHz (typ) (nV√Hz) 10 CMRR (typ) (dB) 114 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.03 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) 0.1 Output swing headroom (to negative supply) (typ) (V) 0.01 Output swing headroom (to positive supply) (typ) (V) -0.01 THD + N at 1 kHz (typ) (%) 0.0005
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 0.15 Offset drift (typ) (µV/°C) 2 Input bias current (max) (pA) 10 GBW (typ) (MHz) 10 Features Zero Crossover Slew rate (typ) (V/µs) 5 Rail-to-rail In, Out Iq per channel (typ) (mA) 0.65 Vn at 1 kHz (typ) (nV√Hz) 10 CMRR (typ) (dB) 114 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.03 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) 0.1 Output swing headroom (to negative supply) (typ) (V) 0.01 Output swing headroom (to positive supply) (typ) (V) -0.01 THD + N at 1 kHz (typ) (%) 0.0005
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • Precision with zero-crossover distortion:
    • Low offset voltage: 150 µV (maximum)
    • High CMRR: 114 dB
    • Rail-to-rail I/O
  • Wide bandwidth: 10 MHz
  • Quiescent current: 650 µA/ch
  • Single-supply voltage range: 2.2 V to 5.5 V
  • Low input bias current: 0.2 pA
  • Low noise: 9 nV/√Hz at 10 kHz
  • Slew rate: 5 V/µs
  • Unity-gain stable
  • Precision with zero-crossover distortion:
    • Low offset voltage: 150 µV (maximum)
    • High CMRR: 114 dB
    • Rail-to-rail I/O
  • Wide bandwidth: 10 MHz
  • Quiescent current: 650 µA/ch
  • Single-supply voltage range: 2.2 V to 5.5 V
  • Low input bias current: 0.2 pA
  • Low noise: 9 nV/√Hz at 10 kHz
  • Slew rate: 5 V/µs
  • Unity-gain stable

The OPA325, OPA2325, and OPA4325 (OPAx325) are precision, low-voltage complementary metal-oxide semiconductor (CMOS) operational amplifiers optimized for very low noise and wide bandwidth, while operating on a low quiescent current of only 650 µA.

The OPAx325 feature a linear input stage with zero-crossover distortion that delivers excellent common-mode rejection ratio (CMRR) of typically 114 dB over the entire input range. The input common-mode range extends 100 mV beyond the negative and positive supply rails. The output voltage typically swings within 10 mV of the rails.

The zero-crossover distortion, combined with wide bandwidth (10 MHz), high slew rate (5 V/µs), and low noise (9 nV/√Hz), make the OPAx325 a very good successive-approximation register (SAR) analog-to-digital converter (ADC) input driver amplifier. In addition, the OPAx325 have a wide supply-voltage range from 2.2 V to 5.5 V, with excellent power-supply rejection ratio (PSRR) over the entire supply range, making the device an excellent choice for precision, low-power applications that run directly from batteries without regulation.

The OPA325 (single-channel version) is available in the SOT23-5 package. The OPA2325 (dual-channel version) is offered in SO-8 and MSOP-8 packages. The OPA4325 (quad-channel version) is available in TSSOP-14 package.

The OPA325, OPA2325, and OPA4325 (OPAx325) are precision, low-voltage complementary metal-oxide semiconductor (CMOS) operational amplifiers optimized for very low noise and wide bandwidth, while operating on a low quiescent current of only 650 µA.

The OPAx325 feature a linear input stage with zero-crossover distortion that delivers excellent common-mode rejection ratio (CMRR) of typically 114 dB over the entire input range. The input common-mode range extends 100 mV beyond the negative and positive supply rails. The output voltage typically swings within 10 mV of the rails.

The zero-crossover distortion, combined with wide bandwidth (10 MHz), high slew rate (5 V/µs), and low noise (9 nV/√Hz), make the OPAx325 a very good successive-approximation register (SAR) analog-to-digital converter (ADC) input driver amplifier. In addition, the OPAx325 have a wide supply-voltage range from 2.2 V to 5.5 V, with excellent power-supply rejection ratio (PSRR) over the entire supply range, making the device an excellent choice for precision, low-power applications that run directly from batteries without regulation.

The OPA325 (single-channel version) is available in the SOT23-5 package. The OPA2325 (dual-channel version) is offered in SO-8 and MSOP-8 packages. The OPA4325 (quad-channel version) is available in TSSOP-14 package.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
9개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 OPAx325 Precision, 10-MHz, Low-Noise, Low-Power, RRIO, CMOS Operational Amplifiers datasheet (Rev. D) PDF | HTML 2019. 6. 26
아날로그 디자인 학술지 ADC 드라이버로 정밀 연산 증폭기 선택 PDF | HTML 2026. 5. 8
Circuit design Single-Supply, 2nd-Order, Sallen-Key Band-Pass Filter Circuit (Rev. A) PDF | HTML 2025. 1. 27
Application brief How to Select Amplifiers for Pressure Transmitter Applications (Rev. B) PDF | HTML 2023. 2. 14
Circuit design Single-supply, 2nd-order, multiple feedback high-pass filter circuit PDF | HTML 2021. 6. 28
Circuit design Single-supply, 2nd-order, multiple feedback low-pass filter circuit PDF | HTML 2021. 6. 28
Circuit design Single-supply, 2nd-order, Sallen-Key high-pass filter circuit PDF | HTML 2021. 6. 28
Circuit design Single-supply, 2nd-order, Sallen-Key low-pass filter circuit PDF | HTML 2021. 6. 28
Circuit design Single-supply, 2nd-order, multiple feedback band-pass filter circuit PDF | HTML 2021. 6. 28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ADS7066EVM-PDK — 8채널 250-kSPS, 16비트, 내부 레퍼런스 ADC의 ADS7066 성능 데모 키트

ADS7066 평가 모듈(EVM) 성능 데모 키트(PDK)는 ADS7066 SAR(연속 근사 레지스터) ADC(아날로그-디지털 컨버터)의 성능 평가용 플랫폼입니다.

ADS7066EVM-PDK는 그래픽 사용자 인터페이스(GUI)가 포함된 전원 및 통신 카드를 제공하여 I/O 확장기로 8입력 채널 부품에 쉽게 연결할 수 있는 성능과 기능을 신속하게 평가할 수 있습니다.

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈

증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.

AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.

  • D(SOIC-8 및 SOIC-14)
  • PW(TSSOP-14)
  • DGK(VSSOP-8)
  • (...)
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
시뮬레이션 모델

OPAx325 PSpice Model (Rev. C)

SBOMA82C.ZIP (29 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

OPAx325 TINA-TI Reference Design (Rev. B)

SBOMA81B (317 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

OPAx325 TINA-TI Spice Model (Rev. B)

SBOMA80B.ZIP (10 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

Simulation file for Low-Pass MFB Filter Circuit

SBOC597.TSC (67 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

Simulation File for Single-supply, Second-order, MFB Band-pass Filter Circuit

SBOC596.TSC (85 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

Simulation for Single-supply, Second Order, Sallen-Key Lowpass Filter Circuit

SBOC598.TSC (61 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

Simulation for Single-supply, Second-order, Multiple-feedback High-pass Filter

SBOC599.TSC (61 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
계산 툴

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.

이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.

지원되는 제품 및 하드웨어
계산 툴

OPAMP-NOISECALC — Noise Calculator

This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:

  • A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060011 — 단일 전원, 2차, 다중 피드백 고역 필터 회로

다중 피드백(MFB) 고역 통과(HP) 필터는 2차 능동 필터입니다. Vref는 단일 전원 공급 애플리케이션을 수용하기 위한 DC 오프셋을 제공합니다. 이 HP 필터는 통과 대역의 주파수에 대한 신호(게인 = –1V/V)를 반전합니다. 게인이 높거나 Q-계수가 큰 경우(예: 3 이상)인 경우 MFB 필터가 더 좋습니다.
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060012 — 단일 공급, 2차, 다중 피드백 저역 필터 회로

MFB(다중 피드백) 저역 필터(LP 필터)는 2차 능동 필터입니다. Vref는 단일 전원 공급 애플리케이션을 수용하기 위한 DC 오프셋을 제공합니다. 이 LP 필터는 통과 대역의 주파수에 대한 신호(게인 = –1V/V)를 반전합니다. 게인이 높거나 Q-계수가 큰 경우(예: 3 이상)인 경우 MFB 필터가 더 좋습니다.
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060053 — 고역 Sallen-Key 필터 회로

Sallen-Key(SK) 고역(HP) 필터는 2수준 능동 필터입니다. Vref는 단일 전원 공급 애플리케이션을 수용하기 위한 DC 오프셋을 제공합니다. 일반적으로 작은 Q 팩터를 원할 때 SK 필터를 사용하고, 잡음을 차단하며, 필터 단계의 비반전 게인을 필요로 하는 경우에 사용합니다. Butterworth 토폴로지는 통과 대역에서 최대 평면 게인을 제공합니다.
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060054 — 저역 Sallen-Key 필터 회로

Sallen-Key 저역 필터는 2수준 능동 필터입니다. Vref는 단일 전원 공급 애플리케이션을 수용하기 위한 DC 오프셋을 제공합니다. Sallen-Key 필터는 대개 작은 Q 팩터를 원할 때, 잡음 제거를 우선 순위에 따라 그리고 필터 단계의 비인버팅 게인을 필요로 하는 경우에 선호됩니다. Butterworth 토폴로지는 통과 대역에서 최대 평면 게인을 제공합니다.
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060055 — 다중 피드백 대역 통과 필터 회로

이 회로는 2차 MFB(다중 피드백) BP(대역 통과) 필터입니다. 이 BP 필터는 저역 통과 및 고역 필터를 계단식으로 적용하여 생성됩니다. Vref는 단일 전원 공급 애플리케이션을 수용하기 위한 DC 오프셋을 제공합니다.
지원되는 제품 및 하드웨어
설계 툴

CIRCUIT060056 — 대역 통과 Sallen-Key 필터 회로

이 회로는 단일 공급, 2수준 Sallen-Key(SK) 대역 통과(BP) 필터입니다. SK 저역 통과 필터와 SK 고역 필터를 계단식으로 적용하여 설계되었습니다. Vref는 단일 전원 공급을 수용하기 위한 DC 오프셋을 제공합니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23 (DBV) 5 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상