전력 관리 부하 스위치

TPS22986

활성

Thunderbolt™ 케이블 전원 멀티플렉서(Thunderbolt 2도 지원)

제품 상세 정보

Imax (A) 0.5 Vin (max) (V) 19.8 Vin (min) (V) 2.8 Number of channels 2 Features Inrush current control, Reverse current blocking, Thermal shutdown, Under voltage lock out Quiescent current (Iq) (typ) (µA) 250 Soft start Fixed Rise Time Rating Catalog Ron (typ) (mΩ) 1000, 120000 Shutdown current (ISD) (typ) (µA) 0.5 Current limit type None Function Inrush current control, Reverse current blocking FET Internal Operating temperature range (°C) -40 to 85 Device type Load switches
Imax (A) 0.5 Vin (max) (V) 19.8 Vin (min) (V) 2.8 Number of channels 2 Features Inrush current control, Reverse current blocking, Thermal shutdown, Under voltage lock out Quiescent current (Iq) (typ) (µA) 250 Soft start Fixed Rise Time Rating Catalog Ron (typ) (mΩ) 1000, 120000 Shutdown current (ISD) (typ) (µA) 0.5 Current limit type None Function Inrush current control, Reverse current blocking FET Internal Operating temperature range (°C) -40 to 85 Device type Load switches
DSBGA (YFP) 16 3.24 mm² 1.8 x 1.8
  • 2.8 V to 19.8 V Input
  • Auto Selects 3.3 V supply
  • >10mA Low Power Switch
  • >500mA High Power Switch
  • Reverse Current Blocking from OUT to VDD
  • Wake on UART Input Activity
  • UART RX and TX Buffers
  • 2.8 V to 19.8 V Input
  • Auto Selects 3.3 V supply
  • >10mA Low Power Switch
  • >500mA High Power Switch
  • Reverse Current Blocking from OUT to VDD
  • Wake on UART Input Activity
  • UART RX and TX Buffers

The TPS22986 is a supply selection device for active Thunderbolt™ cables. The device selects a 3.3V input from two available supplies and connects the chosen input to two outputs, OUTA and OUTB. When a 3.3V supply is not present, the outputs become high impedance.

The TPS22986 has two modes of operation, Normal and Control. In Normal Mode, OUTA is always on when a valid supply is present. OUTB is connected to a valid supply when the ENB input is high.

In Control Mode, OUTA behaves the same as Normal Mode and OUTB is controlled by a combination of monitored inputs and valid supplies on VDD1 and VDD2. When a valid VDD is available, the device waits for a rising input on ENB and then disconnects OUTB until the next falling RXH transition. Once the next falling RXH transition occurs, the device reconnects OUTB.

In either mode, when a valid VDD is not available, the TPS22986 opens all switches and the outputs OUTA and OUTB become high impedance. When the connected VDD exceeds 3.6V, it is disconnected from the outputs.

The TPS22986 is available in a 1.6mm x 1.6mm WCSP package.

The TPS22986 is a supply selection device for active Thunderbolt™ cables. The device selects a 3.3V input from two available supplies and connects the chosen input to two outputs, OUTA and OUTB. When a 3.3V supply is not present, the outputs become high impedance.

The TPS22986 has two modes of operation, Normal and Control. In Normal Mode, OUTA is always on when a valid supply is present. OUTB is connected to a valid supply when the ENB input is high.

In Control Mode, OUTA behaves the same as Normal Mode and OUTB is controlled by a combination of monitored inputs and valid supplies on VDD1 and VDD2. When a valid VDD is available, the device waits for a rising input on ENB and then disconnects OUTB until the next falling RXH transition. Once the next falling RXH transition occurs, the device reconnects OUTB.

In either mode, when a valid VDD is not available, the TPS22986 opens all switches and the outputs OUTA and OUTB become high impedance. When the connected VDD exceeds 3.6V, it is disconnected from the outputs.

The TPS22986 is available in a 1.6mm x 1.6mm WCSP package.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet Thunderbolt Supply Selection IC, TPS22986 datasheet (Rev. A) 2013/12/18
Application note Load Switch Thermal Considerations (Rev. A) 2018/10/11
Application note Selecting a Load Switch to Replace a Discrete Solution 2017/04/30
Application note Timing of Load Switches 2017/04/27
Application note Managing Inrush Current (Rev. A) 2015/05/28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS22986EVM — TPS22986 선더볼트 케이블 전원 MUX 평가 모듈

The TPS22986 evaluation module (EVM) helps designers evaluate the performance of the TPS22986 Supply Selection IC. The TPS22986 selects a 3.3-V input from two available supplies and connects the chosen input to two outputs, OUTA and OUTB. If a 3.3-V supply is not present, the outputs become high (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS22986 HSPICE Transient Model

SLVM764.ZIP (13 KB) - HSpice Model
시뮬레이션 모델

TPS22986 IBIS Model

SLVM802.ZIP (41 KB) - IBIS Model
시뮬레이션 모델

TPS22986 TINA-TI Reference Design

SLVM797.TSC (309 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS22986 TINA-TI Transient Spice Model

SLVM798.ZIP (37 KB) - TINA-TI Spice Model
시뮬레이션 모델

TPS22986 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCY0A.ZIP (20 KB) - PSpice Model
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFP) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상