전원 관리 게이트 드라이버 하프 브리지 드라이버

TPS28225-Q1

활성

오토모티브 4A, 27V 하프 브리지 게이트 드라이버(동기 정류용 4V UVLO 지원)

제품 상세 정보

Bootstrap supply voltage (max) (V) 27 Power switch MOSFET Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 8 Peak output current (A) 6 Operating temperature range (°C) -40 to 105 Undervoltage lockout (typ) (V) 3.5 Rating Automotive Propagation delay time (µs) 0.014 Rise time (ns) 10 Fall time (ns) 10 Iq (mA) 0.35 Switch node voltage (V) 0 Features Synchronous Rectification Driver configuration Single
Bootstrap supply voltage (max) (V) 27 Power switch MOSFET Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 8 Peak output current (A) 6 Operating temperature range (°C) -40 to 105 Undervoltage lockout (typ) (V) 3.5 Rating Automotive Propagation delay time (µs) 0.014 Rise time (ns) 10 Fall time (ns) 10 Iq (mA) 0.35 Switch node voltage (V) 0 Features Synchronous Rectification Driver configuration Single
SOIC (D) 8 29.4 mm² 4.9 x 6 VSON (DRB) 8 9 mm² 3 x 3
  • Qualified for automotive applications
  • Drives two N-channel MOSFETs with 14-ns adaptive dead time
  • Wide gate drive voltage: 4.5 V up to 8.8 V with best efficiency at 7 V to 8 V
  • Wide power system train input voltage: 3 V up to 27 V
  • Wide input PWM signals: 2-V up to 13.2-V amplitude
  • Capable of driving MOSFETs with ≥40-A current per phase
  • High frequency operation: 14-ns propagation delay and 10-ns rise or fall time allows FSW up to 2 MHz
  • Capable of propagating <30-ns input PWM pulses
  • Low-side driver sink on-resistance (0.4 Ω) prevents dV/dT related shoot-through current
  • Three-state PWM input for power stage shutdown
  • Space saving enable (input) and power good (output) signals on the same pin
  • Thermal shutdown
  • UVLO protection
  • Internal bootstrap diode
  • Economical SOIC-8 and thermally enhanced 3-mm × 3-mm VSON-8 packages
  • High performance replacement for popular three-state input drivers
  • Qualified for automotive applications
  • Drives two N-channel MOSFETs with 14-ns adaptive dead time
  • Wide gate drive voltage: 4.5 V up to 8.8 V with best efficiency at 7 V to 8 V
  • Wide power system train input voltage: 3 V up to 27 V
  • Wide input PWM signals: 2-V up to 13.2-V amplitude
  • Capable of driving MOSFETs with ≥40-A current per phase
  • High frequency operation: 14-ns propagation delay and 10-ns rise or fall time allows FSW up to 2 MHz
  • Capable of propagating <30-ns input PWM pulses
  • Low-side driver sink on-resistance (0.4 Ω) prevents dV/dT related shoot-through current
  • Three-state PWM input for power stage shutdown
  • Space saving enable (input) and power good (output) signals on the same pin
  • Thermal shutdown
  • UVLO protection
  • Internal bootstrap diode
  • Economical SOIC-8 and thermally enhanced 3-mm × 3-mm VSON-8 packages
  • High performance replacement for popular three-state input drivers

The TPS28225-Q1 is a high-speed driver for N-channel complementary driven power MOSFETs with adaptive dead-time control. This driver is optimized for use in variety of high-current, single and multi-phase DC-to-DC converters. The TPS28225-Q1 is highly efficient, has a small solution size and low-EMI emissions.

The TPS28225-Q1 device offers high performance features such as a 8.8-V gate drive voltage, 14-ns adaptive dead-time control, 14-ns propagation delays and high-current 2-A source and 4-A sink drive capabilities. The 0.4-Ω impedance for the lower gate driver holds the gate of power MOSFET below its threshold and ensures no shoot-through current at high dV/dt phase node transitions. The bootstrap capacitor is charged by an internal diode which allows the use of an N-channel MOSFETs in a half-bridge configuration.

The TPS28225-Q1 is offered in an economical SOIC-8 package and in a thermally enhanced small sized VSON package. The driver is specified to operate in the temperature range of –40°C to 105°C with the absolute maximum junction temperature of 150°C.

The TPS28225-Q1 is a high-speed driver for N-channel complementary driven power MOSFETs with adaptive dead-time control. This driver is optimized for use in variety of high-current, single and multi-phase DC-to-DC converters. The TPS28225-Q1 is highly efficient, has a small solution size and low-EMI emissions.

The TPS28225-Q1 device offers high performance features such as a 8.8-V gate drive voltage, 14-ns adaptive dead-time control, 14-ns propagation delays and high-current 2-A source and 4-A sink drive capabilities. The 0.4-Ω impedance for the lower gate driver holds the gate of power MOSFET below its threshold and ensures no shoot-through current at high dV/dt phase node transitions. The bootstrap capacitor is charged by an internal diode which allows the use of an N-channel MOSFETs in a half-bridge configuration.

The TPS28225-Q1 is offered in an economical SOIC-8 package and in a thermally enhanced small sized VSON package. The driver is specified to operate in the temperature range of –40°C to 105°C with the absolute maximum junction temperature of 150°C.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4
유형 직함 날짜
* Data sheet TPS28225-Q1 Automotive High-Frequency 4-A Sink Synchronous MOSFET Drivers datasheet (Rev. D) PDF | HTML 2021/12/13
Application brief External Gate Resistor Selection Guide (Rev. A) 2020/02/28
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 2020/02/28
More literature Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 2018/10/29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

TPS28225 PSpice Transient Model

SLUM287.ZIP (36 KB) - PSpice Model
시뮬레이션 모델

TPS28225 Unencrypted PSpice Transient Model

SLUM496.ZIP (3 KB) - PSpice Model
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
SOIC (D) 8 옵션 보기
VSON (DRB) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상