TPS51604
- Reduced Dead-Time Drive Circuit for Optimized
CCM - Automatic Zero Crossing Detection for Optimized
DCM Efficiency - Multiple Low-Power Modes for Optimized Light-
Load Efficiency - Optimized Signal Path Delays for High-Frequency
Operation - Integrated BST Switch Drive Strength Optimized
for Ultrabook FETs - Optimized for 5-V FET Drive
- Conversion Input Voltage Range (VIN): 4.5 to 28 V
- 2-mm × 2-mm, 8-Pin, WSON Thermal Pad
Package
The TPS51604 drivers are optimized for high-frequency CPU VCORE applications. Advanced features such as reduced dead-time drive and auto zero crossing are used to optimize efficiency over the entire load range.
The SKIP pin provides the option of CCM operation to support controlled management of the output voltage. In addition, the TPS51604 supports two low-power modes. With the PWM input in tri-state, quiescent current is reduced to 130 µA, with immediate response. When SKIP is held at tri-state, the current is reduced to 8 µA (typically 20 µs is required to resume switching). Paired with the appropriate TI controller, the drivers deliver an exceptionally high performance power supply system.
The TPS51604 device is packaged in a space saving, thermally-enhanced 8-pin, 2-mm × 2-mm WSON package and operates from –40°C to 105°C.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS51604 Synchronous Buck FET Driver for High-Frequency CPU Core Power datasheet (Rev. B) | PDF | HTML | 2015/10/23 |
| Application brief | External Gate Resistor Selection Guide (Rev. A) | 2020/02/28 | ||
| Application brief | Understanding Peak IOH and IOL Currents (Rev. A) | 2020/02/28 | ||
| More literature | Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) | 2018/10/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PMP9128 — 오토모티브 인포테인먼트용 소형 폼 팩터 Nvidia Tegra T40/T50 Proc 전원 레퍼런스 디자인
TIDA-00448 — 강화 디지털 아이솔레이터를 지원하는 유연한 고전류 IGBT 게이트 드라이버 레퍼런스 디자인
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| WSON (DSG) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치