TPS54060
- 3.5-V to 60-V Input Voltage Range
- 200-mΩ High-Side MOSFET
- High Efficiency at Light Loads with a Pulse
Skipping Eco-Mode™ - 116-µA Operating Quiescent Current
- 1.3-µA Shutdown Current
- 100-kHz to 2.5-MHz Switching Frequency
- Synchronizes to External Clock
- Adjustable Slow Start and Sequencing
- UV and OV Power Good Output
- Adjustable UVLO Voltage and Hysteresis
- 0.8-V Internal Voltage Reference
- 10-Pin HVSSOP With PowerPAD™ Package and
3-mm × 3-mm 10-Pin VSON Package - Supported by WEBENCH™ and SwitcherPro™
Software Tool - APPLICATIONS
- 12-V, 24-V, and 48-V Industrial and Commercial
Low Power Systems - Aftermarket Auto Accessories: Video, GPS,
Entertainment
- 12-V, 24-V, and 48-V Industrial and Commercial
All other trademarks are the property of their respective owners
The TPS54060 device is a 60-V, 0.5-A, step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load, regulated output supply current to 116 µA. Using the enable pin, shutdown supply current is reduced to 1.3 µA, when the enable pin is low.
VIN undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow start pin that can also be configured for sequencing/tracking. An open-drain power good signal indicates the output is within 94% to 107% of its nominal voltage.
A wide switching frequency range allows efficiency and external component size to be optimized. Frequency fold back and thermal shutdown protects the part during an overload condition.
The TPS54060 is available in 10-pin thermally enhanced HVSSOP PowerPAD™ package and 10-pin 3-mm × 3-mm VSON package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS54060 0.5-A, 60-V Step Down DC-DC Converter with Eco-Mode™ datasheet (Rev. C) | PDF | HTML | 2015. 9. 8 | |
| 애플리케이션 노트 | Understanding Eco-mode(TM) Operation | 2016. 12. 5 | |||
| 애플리케이션 노트 | Design Considerations for DC-DC Converters in Fast-Input Slew Rate Applications | 2015. 3. 5 | |||
| 애플리케이션 노트 | Automated Frequency Response Analyzer | 2013. 10. 9 | |||
| 애플리케이션 노트 | Differences between the TPS54x40, TPS54x60 and the TPS54x40A, TPS54x60A | 2013. 4. 17 | |||
| 애플리케이션 노트 | Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) | 2012. 10. 26 | |||
| 애플리케이션 노트 | Level Shifting Control for an Inverting Buck-boost | 2012. 10. 10 | |||
| 애플리케이션 노트 | Improved Load Current Capability for Cap-Drop Off-Line Power Supply for E-Meter | 2011. 10. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS54060EVM-457 — TPS54060 48V 입력, 3.3V 출력, 0.5A 평가 모듈
TPS54060EVM-590 — 100mA 분할 레일 SWIFT™ 컨버터 평가 모듈
LEDDRIVER60VSWIFT-CALC — TPS54160 60-V Step-Down LED Driver Design Calculator Download
The LEDDriver60VSWIFT-CALC design calculator is an Excel spreadsheet that facilitates design with the 60V TPS54x60 family of non-synchronous buck converters used as a high-brightness LED driver. The design achieves a constant current supply with an output voltage that varies with changes in the LED (...)
SLVC392 — Capacitor Drop Design Calculator
SLVC432 — TPS54x40 and TPS54x60 Buck Design Spreadsheet
SWIFTINV-CALC — SWIFT™ Converter Inverting Buck/Boost Calculator
The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)
SWIFTPOSNEG-CALC — TPS54160 Pos/Neg Calculation Utility Download
The SWIFTPosNeg-CALC Excel sheet is a complementary worksheet to the SLVA369 application note.
This worksheet is used to calculate the external components needed to create a dual output (i.e. positive and negative) power supply using a step-down switching regulator and catalog off the shelf coupled (...)
PMP10260 — 24Vdc 입력(이중 차량 배터리) 오토모티브 다중 위상 동기 벅 레퍼런스 디자인
This high-efficiency, high-power reference design uses the LM5119 two-phase synchronous-buck controller to regulate 14.4V at 60A. This design can be used to supply single car battery power from a double battery system, often found in trucks. Features include input EMI filtering, output hot swap (...)
TIDA-00839 — 저전력 홀 효과 센서를 사용한 자기 변조 감지 레퍼런스 설계
자기 변조는 에너지 측정 시스템의 변압기를 마비시킬 수 있으며, 이로 인해 시스템에 전원이 제대로 공급되지 않거나 부하에서 소비되는 에너지를 올바르게 등록하지 못할 수 있습니다. 이 설계는 홀 센서를 사용하여 자기 변조를 감지하는 클래스 0.2 3상 에너지 측정 시스템을 구현합니다. 자기 변조 감지는 주 및 백업 전원에서 모두 실행될 때 활성화됩니다. 백업 전원에서 실행할 때 배터리 수명을 늘리기 위해 홀 센서의 전류 소비를 줄이는 데 사용됩니다.
TIDM-3PH-ENERGY5-ESD — 향상된 ESD 보호를 지원하는 0.5등급 3상 에너지 측정 시스템 레퍼런스 디자인
TIDM-3PH-ENERGY5-ESD는 향상된 ESD(정전 방전) 보호 기능을 갖춘 ANSI/IEC 0.5 등급의 3상 에너지 측정 시스템을 구현합니다. 이 설계는 ZigBee™ 연결을 통한 통신도 지원합니다. 에너지 측정 시스템 온 칩(SoC)은 모든 계측 기능을 수행하는 데 사용되며 CC2530EM 애드온 보드에 활성 전력 결과를 전송합니다. 함께 제공되는 홈 디스플레이 레퍼런스 설계(TIDM-LOWEND-IHD)를 사용하여 원격으로 결과를 표시할 수 있습니다.
이 레퍼런스 설계는 MSP430F67641A를 사용하며 (...)
TIDM-3PHMETER-ROGOWSKI — 3상 Rogowski 코일 기반 와트시 계량기 레퍼런스 디자인 구현
이 설계는 Rogowski 코일 전류 센서를 지원하는 고집적 단일 칩 전기 계량 솔루션을 구현합니다. RMS 전류 및 전압, 유효 및 무료 전력과 에너지, 역률 및 주파수와 같은 다상 에너지 측정을 위한 다양한 매개 변수를 계산하기 위한 하드웨어 및 소프트웨어 설계 파일이 제공됩니다. Rogowski 코일에 대한 추가 하드웨어 및 소프트웨어 지원을 통해 기존 전류 변압기에서 마이그레이션할 때 하드웨어 변경을 최소화하면서 Rogowski 코일과 손쉽게 상호 작용할 수 있습니다. Rogowski 코일 전류 감지 라이브러리는 (...)
TIDM-3PHMTR-TAMP-ESD — 향상된 ESD 보호 및 변조 감지를 지원하는 3상 계측학 레퍼런스 디자인
이 레퍼런스 설계는 향상된 ESD 보호 기능을 지원하는 ANSI/IEC 0.2 등급의 3상 에너지 계량기를 구현합니다. 또한 이 설계는 ZigBee™ 연결을 통한 에너지 도난 및 통신의 가능성을 제한하는 변조 감지 기능을 제공합니다. 전자 계량기 SoC는 모든 계측 기능을 수행하는 데 사용되며 CC2530EM 애드온 보드로 활성 전력 결과를 전송합니다. 함께 제공되는 홈 디스플레이 레퍼런스 설계(TIDM-LOWEND-IHD)를 사용하여 원격으로 결과를 표시할 수 있습니다.
이 레퍼런스 설계는 MSP430F67791A를 사용하며 (...)
TIDM-THDREADING — 에너지 모니터링을 위한 총 고조파 왜곡 측정 레퍼런스 디자인
TIDM-THDREADING 레퍼런스 설계는 3상 에너지 측정 시스템에서 전력 품질 분석을 구현합니다. 전력 품질 모니터링 및 분석은 전력망의 안정성을 개선하는 데 점점 더 큰 역할을 하고 있습니다. 이 설계는 THD(Total Harmonic Distortion)를 측정하고, 전압 저하 및 증가를 모니터링하고, 위상 간 각도를 측정하여 위상 시퀀스를 결정하고 우발적인 위상 스와핑을 방지합니다. 4사분면 에너지 측정은 양방향 에너지 흐름을 사용하는 순 계량 시스템에서 지원됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGQ) | 10 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.