TPS54335A
- Synchronous 128-mΩ and 84-mΩ MOSFETs for
3-A Continuous Output Current - TPS54335A: Internal 2-ms Soft-Start,
50-kHz to 1.5-MHz Adjustable Frequency - TPS54336A: Adjustable Soft-Start,
Fixed 340-kHz Frequency - Low 2-µA Shutdown, Quiescent Current
- 0.8-V Voltage Reference with ±0.8%
Accuracy - Current Mode Control
- Monotonic Startup into Pre-Biased Outputs
- Pulse Skipping for Light-Load Efficiency
- Hiccup Mode Overcurrent Protection
- Thermal Shutdown (TSD) and
Overvoltage Transition Protection - 8-Pin SO PowerPAD and 10-Pin VSON Packages
The TPS5433xA family of devices are synchronous converters with an input-voltage range of 4.5 to 28 V. These devices include an integrated low-side switching FET that eliminates the need for an external diode which reduces component count.
Efficiency is maximized through the integrated 128-mΩ and 84-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well-regulated voltage reference that is 1.5% over temperature.
Cycle-by-cycle current limiting on the high-side MOSFET protects the TPS5433xA family of devices in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS5433xA 4.5-V to 28-V Input, 3-A Output, Synchronous Step-Down DC-DC Converter datasheet (Rev. D) | PDF | HTML | 2016/02/10 |
| Application brief | Simplify Voltage and Current Measurement in Battery Test Equipment (Rev. A) | PDF | HTML | 2022/03/10 | |
| User guide | TPS54335A Step-Down Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021/10/07 | |
| Application note | How to Estimate Overshoot and Undershoot of Load Transients of a DC/DC Regulator | 2017/12/20 | ||
| Application note | Using TPS54335A to Create an Inverting Power Supply (Rev. A) | 2017/07/19 | ||
| Application note | Using TPS54335A to Create an Inverting Power Supply | 2017/07/13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS54335AEVM-010 — TPS54335A 동기, 스텝다운 컨버터 평가 모듈
TPS54335AEVM-010은 TPS54335A 동기 스텝다운 SWIFT™ 컨버터 평가를 위한 완조립 및 테스트를 거친 회로입니다. 이 EVM은 8V~28V 입력 전압을 조절된 5V 출력 전압으로 변환하여 최대 2A를 제공합니다. TPS54335A에는 MOSFET가 통합되어 있고 전류 모드 제어를 구현하여 외부 부품 수를 줄이기 때문에 설계 크기가 작아집니다. 통합형 고압측 및 저압측 MOSFET, 낮은 정동작 공급 전류 및 저부하 시 펄스 스킵을 제공하여 96.5%의 효율성을 달성합니다. 인에이블 핀을 사용하여 셧다운 모드에 (...)
TPS54335A Unencrypted PSpice Average Model Package (Rev. A)
TPS54335A Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-00714 — USB 타입-C 및 USB PD 컨트롤러 전원 스위치, 고속 멀티플렉서 레퍼런스 디자인
TIDA-080002 — 울트라 모바일, 저전력 DLP® Pico™ qHD 디스플레이 레퍼런스 설계
TIDA-01226 — DLP Pico 기술을 사용하는 초소형 풀HD 1080p(최대 16개 증폭기) 프로젝션 디스플레이 레퍼런스 디자인
TIDA-01571 — DLP® 기술을 사용한 향상된 밝기를 지원하는 휴대용, 저전력 HD 디스플레이 레퍼런스 설계
PMP9668 — 범용 uP 제어 배터리 충전기 24Vin 10 Aout 최대, 5/12V 2A 및 5V 4A, 2 USB 포트 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.