전원 관리 AC/DC & DC/DC converters (integrated FET)

TPS61045

활성

QFN-8, 디지털 조정 가능 28V, 85% 효율 부스트 컨버터

제품 상세 정보

Vin (min) (V) 1.8 Vin (max) (V) 6 Topology Boost Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Enable, Load Disconnect, Nonsynchronous Vout (min) (V) 1.8 Vout (max) (V) 28 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00004
Vin (min) (V) 1.8 Vin (max) (V) 6 Topology Boost Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Enable, Load Disconnect, Nonsynchronous Vout (min) (V) 1.8 Vout (max) (V) 28 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00004
VSON (DRB) 8 9 mm² 3 x 3
  • Input Voltage Range from 1.8 to 6 V
  • Output Voltage of up to 28 V Possible
  • Up to 85% Efficiency
  • Digitally Adjustable Output Voltage Control
  • Disconnects Output From Input During Shutdown
  • Switching Frequency up to 1 MHz
  • No Load Quiescent Current 40 µA Typical
  • Thermal Shutdown Mode
  • Shutdown Current 0.1 µA Typical
  • Available in Small 3-mm × 3-mm VSON Package
  • Input Voltage Range from 1.8 to 6 V
  • Output Voltage of up to 28 V Possible
  • Up to 85% Efficiency
  • Digitally Adjustable Output Voltage Control
  • Disconnects Output From Input During Shutdown
  • Switching Frequency up to 1 MHz
  • No Load Quiescent Current 40 µA Typical
  • Thermal Shutdown Mode
  • Shutdown Current 0.1 µA Typical
  • Available in Small 3-mm × 3-mm VSON Package

The TPS61045 device is a high-frequency boost converter with digitally-programmable output voltage and true shutdown. During shutdown, the output is disconnected from the input by opening the internal input switch. This allows a controlled power-up and power-down sequencing of the display. The output voltage can be increased or decreased in digital steps by applying a logic signal to the CTRL pin. The output voltage range, as well as the output voltage step size, can be programmed with the feedback divider network. With a high switching frequency of up to 1 MHz, the TPS61045 device allows the use of small external components, and together, with the small 8-pin VSON package, a minimum system solution size is achieved.

The TPS61045 device is a high-frequency boost converter with digitally-programmable output voltage and true shutdown. During shutdown, the output is disconnected from the input by opening the internal input switch. This allows a controlled power-up and power-down sequencing of the display. The output voltage can be increased or decreased in digital steps by applying a logic signal to the CTRL pin. The output voltage range, as well as the output voltage step size, can be programmed with the feedback divider network. With a high switching frequency of up to 1 MHz, the TPS61045 device allows the use of small external components, and together, with the small 8-pin VSON package, a minimum system solution size is achieved.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS61376 활성 25V, 4.5A, 부스트 컨버터, 2.5% 정확도 입력 평균 전류 제한 및 실제 분리 TPS61376 has adjustable input current limited and true disconnection feature
비교 대상 장치와 유사한 기능
TPS61046 활성 WCSP 패키지의 28V 출력 전압 부스트 컨버터 For applications requiring smaller package or true disconnection.

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기13
유형 직함 날짜
* Data sheet TPS61045 Digitally Adjustable Boost Converter datasheet (Rev. C) PDF | HTML 2014/12/05
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
Application note Using External Bias to Broaden Input Voltage Range of Boost Converters PDF | HTML 2021/11/08
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) 2017/11/29
Application note Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017/06/15
Application note Feedforward Capacitor Makes Boost Converter Fast and Stable 2016/11/02
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 2012/04/26
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17
Application note Minimizing Ringing at the Switch Node of a Boost Converter 2006/09/15
EVM User's guide TPS61045EVM-231: Adjustable LCD Boost Converter EVM 2003/01/22
Application note High Voltage Power Supply Using the TPS61040 2002/07/09

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS61045EVM-231 — TPS61045 평가 모듈

The TPS61045EVM-231 is an evaluation tool for the TPS61045 inductive boost converter in 3x3mm2 QFN that can supply voltages up to 28V from input voltages in the range of 1.8V to 6V. The EVM is configured to supply a highly efficient, digitally adjustable, 18-V output for LCD bias supplies. This EVM (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS61045 Macromodels Transient

SLVMD16.ZIP (92 KB) - SIMPLIS Model
시뮬레이션 모델

TPS61045 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM359A.ZIP (41 KB) - PSpice Model
패키지 다운로드
VSON (DRB) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상