홈 전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전력 관리
AC/DC 및 DC/DC 컨버터(통합 FET)
신규

TPS61382-Q1

활성

백업 전원에서 400kHz 벅 충전기 및 배터리 상태 감지를 지원하는 400kHz 부스트 컨버터

지금 주문
데이터 시트

TPS61382-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Topology Boost, Buck, Buck/Boost Switch current limit (typ) (A) 15 Vin (max) (V) 3.8 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread-spectrum clocking (SSC), Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 20 Duty cycle (max) (%) 90 Type Converter
Rating Automotive Topology Boost, Buck, Buck/Boost Switch current limit (typ) (A) 15 Vin (max) (V) 3.8 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread-spectrum clocking (SSC), Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 20 Duty cycle (max) (%) 90 Type Converter
WQFN-FCRLF (RAV) 24 12 mm² 4 x 3
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT Pin) up to 21V, absmax up to 40V to withstand load dump
    • Supports multi-chemistry battery charging profile of 1-2cell NiMH, 1cell Li-Ion, LiFePO4, 1 cell super capacitor
    • Programmable charging current up to 3A
    • Battery voltage operating range 0V to 3.8V
    • Programmable charging timer up to 32h
    • NTC thermistor input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery backup power system
    • Programmable output voltage range: 5V to 12V
    • Programmable boost average input current limit from 5A to 15A
    • Back-up battery (BUB) voltage in boost mode: 0.5V to 3.8V
      • Minimum 3V for start up when Vout<2.8V
      • Minimum 1V for start up when Vout>2.8V
    • <20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery state-of-health(SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current and battery temperature
  • Lower quiescent current and leakage current
    • 20µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the backup battery
  • EMI mitigation
    • 400kHz fix switching frequency
    • Optional programmable spread spectrum

  • 3mm × 4mm 25-pin package with wettable flank
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT Pin) up to 21V, absmax up to 40V to withstand load dump
    • Supports multi-chemistry battery charging profile of 1-2cell NiMH, 1cell Li-Ion, LiFePO4, 1 cell super capacitor
    • Programmable charging current up to 3A
    • Battery voltage operating range 0V to 3.8V
    • Programmable charging timer up to 32h
    • NTC thermistor input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery backup power system
    • Programmable output voltage range: 5V to 12V
    • Programmable boost average input current limit from 5A to 15A
    • Back-up battery (BUB) voltage in boost mode: 0.5V to 3.8V
      • Minimum 3V for start up when Vout<2.8V
      • Minimum 1V for start up when Vout>2.8V
    • <20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery state-of-health(SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current and battery temperature
  • Lower quiescent current and leakage current
    • 20µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the backup battery
  • EMI mitigation
    • 400kHz fix switching frequency
    • Optional programmable spread spectrum

  • 3mm × 4mm 25-pin package with wettable flank

The TPS61382Q1 is 400kHz, 40V, 15A automotive bi-directional boost converter/ buck charger with battery state of health detection function for back-up power like TBOX. The converter supports absmax voltage up to 40V on VOUT pin to withstand load-dump and supports connecting to 12V car battery.

The TPS61382Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4, super capacitor.

TPS61382Q1 integrates boost function that operates over 0.5V to 3.8V BUB voltage and 5-12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A-15A programmable average current limit.

The TPS61382Q1 integrates battery health detection feature which discharges the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61382Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care needs to be taken when designing the PCB with TPS61382Q1, view for details.

The TPS61382Q1 is 400kHz, 40V, 15A automotive bi-directional boost converter/ buck charger with battery state of health detection function for back-up power like TBOX. The converter supports absmax voltage up to 40V on VOUT pin to withstand load-dump and supports connecting to 12V car battery.

The TPS61382Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4, super capacitor.

TPS61382Q1 integrates boost function that operates over 0.5V to 3.8V BUB voltage and 5-12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A-15A programmable average current limit.

The TPS61382Q1 integrates battery health detection feature which discharges the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61382Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care needs to be taken when designing the PCB with TPS61382Q1, view for details.
filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
신규 TPS61381-Q1 활성 LDO 충전기 및 배터리 상태 감지를 지원하는 400kHz 부스트 컨버터 400kHz, LDO charger version

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TPS61382-Q1 Automotive 400kHz, 40V, 15A Boost Converter with Buck/LDO Charger and Battery State of Health Detection datasheet (Rev. A) PDF | HTML 2025/09/25

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN-FCRLF (RAV) 24 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상