이 제품의 최신 버전이 있습니다
TPS62150
- DCS-Control™ topology
- Input voltage range: 3 V to 17 V
- Up to 1-A output current
- Adjustable output voltage from 0.9 V to 6 V
- Pin-selectable output voltage (nominal, +5%)
- Programmable soft start and tracking
- Seamless power-save mode transition
- Quiescent current of 17 µA (typ.)
- Selectable operating frequency
- Power-good output
- 100% duty-cycle mode
- Short-circuit protection
- Overtemperature protection
- Pin-to-pin compatible with the TPS62130 and TPS62140
- Available in a 3-mm × 3-mm, VQFN-16 package
- Use the TPS82150 module for faster designs
The TPS6215x family is an easy-to-use synchronous step down dc-dc converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy by the use of DCS-Control topology.
With their wide operating input-voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either Li-Ion or other batteries as well as from 12-V intermediate power rails. The devices support up to 1-A continuous output current at output voltages between 0.9 V and 6 V (in 100% duty-cycle mode). The soft-start pin controls the output-voltage start-up ramp, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and open-drain power-good (PG) pins.
In power-save mode, the devices draw quiescent current of about 17 µA from VIN. Power-save-mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device turns off and current consumption is less than 2 µA.
The device, available in adjustable- and fixed-output-voltage versions, comes in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP149RSBEVM — DP149 3.4Gbps DP++ ~ HDMI 리타이머 평가 모듈
DP149RSBEVM은 고객이 비디오 애플리케이션용 DP149 장치를 평가할 수 있도록 만들어진 PCB입니다. 이 EVM은 RSB 패키지의 DP149 구현을 위한 하드웨어 레퍼런스 설계로도 사용할 수 있습니다. 라우팅/배치 규칙에 대한 PCB 설계 그림을 제공하도록 요청하면 PCB 설계/레이아웃 파일을 제공할 수 있습니다.
LMK04616EVM — LMK04616 평가 모듈
LMX2594EVM — LMX2594EVM 위상 동기화 및 JESD204B를 지원하는 15GHz 광대역 RF 신시사이저 평가 모듈
LMX2594EVM EVM(평가 모듈)은 LMX2594 개발을 위한 플랫폼입니다. LMX2594는 업계 최초의 통합형 VCO(전압 제어 오실레이터)를 포함한 PLL이며 최고 15GHz의 기본 VCO 출력을 얻을 수 있습니다. 업계 최고의 PLL FOM(Figure of Merit)은 -129dBc/Hz의 1/f를 지원하는 -236dBc/Hz입니다. 이 장치는 JESD204B 표준을 지원하기 때문에(SYSREF 신호를 생성 또는 반복할 수 있음) 고속 데이터 컨버터를 클록하는 데 이상적입니다. EVM 측정의 통합 지터는 9GHz (...)
TDP158RSBEVM — TMDS & HDMI™ 리드라이버와 결합된 6Gbps AC 평가 모듈
TPS62150EVM-505 — 3x3mm, 16핀 QFN의 TPS62150 1A, 동기식 스텝다운 컨버터용 평가 모듈
- Related Terms:
- Synchronous Step Down DC-DC Converter
- DC to DC Step Down Converter
- Buck DC DC Converter
The TPS62150EVM-505 (HPA505-003) uses the TPS62150 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. (...)
SLVC366 — Design Tool for Analog Dimming Using a PWM Signal
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
TIDA-00316 — 의사 차동 ADC/MCU와 전류 출력 홀 센서 및 CT의 인터페이스를 위한 레퍼런스 디자인
This reference design provides interfacing current output Hall sensors and current transformers to pseudo-differential ADC (standalone and integrated into MCU). Two variants of signal conditioning circuits are designed to measure motor current using bipolar and unipolar supply voltages (...)
TIDA-00368 — 차동 ADC/MCU와 전류 출력 홀 센서 및 CT의 인터페이스를 위한 레퍼런스 디자인
This reference design provides interfacing current output Hall sensors and current transformers to differential ADC (standalone and integrated into MCU). The differential signal conditioning circuit is designed to measure motor current with an accuracy of ±0.5% across operating (...)
TIDA-00885 — 벅 컨버터를 통해 작동하는 9.8GHz RF 고성능 신시사이저 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.