전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62868

활성

1.5mm x 2.5mm QFN 패키지의 I²C 인터페이스를 지원하는 5.5V, 4A 동기 스텝다운 컨버터

제품 상세 정보

Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 4 Vin (max) (V) 5.5 Vin (min) (V) 2.4 Vout (max) (V) 3.35 Vout (min) (V) 0.2 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter, Converter (Integrated Switch), DC/DC converter
Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 4 Vin (max) (V) 5.5 Vin (min) (V) 2.4 Vout (max) (V) 3.35 Vout (min) (V) 0.2 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter, Converter (Integrated Switch), DC/DC converter
VQFN-HR (RQY) 9 3.75 mm² 2.5 x 1.5
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS62869 활성 1.5mm x 2.5mm QFN 패키지의 I²C 인터페이스를 지원하는 5.5V, 6A 동기 스텝다운 컨버터 Higher output current alternative.
비교 대상 장치와 유사한 기능
TPS62864 활성 1.05mm x 1.78mm WCSP 패키지의 I2C 인터페이스를 지원하는 4A 동기 스텝다운 컨버터 Smaller 4-A converter in CSP package.
TPSM82864A 활성 3.5mm × 4mm QFN에 인덕터가 통합된 2.4V~5.5V 입력, 4A 씬 스텝다운 전원 모듈 DC/DC module alternative in overmolded QFN.

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62869EVM-118 — I2C 인터페이스가 있는 고전력 밀도 6A 스텝다운 컨버터 평가 모듈

TPS62869EVM-x(BSR118) 평가 모듈(EVM)은 소형 1.5mm x 2.5mm QFN 패키지 솔루션에서 DCS-Control을 지원하는 6A 스텝다운 컨버터인 TPS62869 제품군의 평가를 지원합니다. 이 EVM은 2.4V~5.5V의 높은 입력 전압에서 1% 정확도의 출력 전압으로 0.4V~1.675V 사이의 출력 전압을 생성하며, 기본적으로 0.9V 출력 전압 설정이 두 회로에 구현됩니다.  TPS62869 제품군은 인공 지능 칩, 카메라 모듈, SSD(Solid State Drive), 광학 모듈과 같은 공간이 (...)
사용 설명서: PDF | HTML
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS6286800C)

SLUM936.ZIP (327 KB) - PSpice Model
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS628680A)

SLUM933.ZIP (303 KB) - PSpice Model
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS6286810C)

SLUM937.ZIP (326 KB) - PSpice Model
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS628681A)

SLUM934.ZIP (300 KB) - PSpice Model
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS6286820C)

SLUM938.ZIP (326 KB) - PSpice Model
시뮬레이션 모델

TPS62868 PSpice Transient Model (for TPS628682A)

SLUM935.ZIP (302 KB) - PSpice Model
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RQY) 9 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상