TPS793
- Low-dropout regulator with enable
- Available in fixed-voltage versions:
- 1.8V to 4.75V (legacy chip)
- 1.8V to 3.3V (new chip)
- Adjustable output voltage range: 1.22V to 5.5V
- Low noise:
- 55µVRMS (legacy chip)
- 69µVRMS (new chip)
- Fast start-up time:
- 50µs (legacy chip)
- 500µs (new chip)
- Very-low dropout voltage: 112mV (typ)
- For a more updated portfolio device, see the TPS7A20
The TPS793 is a low-dropout (LDO) voltage regulators that features high power-supply rejection ratio (PSRR), and offers excellent line and load transient responses. This device is stable with a small 2.2µF ceramic capacitor on the output. The TPS793 offers low dropout voltages for example, 112mV (typical) at 200mA. The low output noise and great PSRR makes this device suitable to power sensitive analog loads. The TPS793 offers a flexible option for post regulation with the adjustable capability.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS793 Low-Noise, High PSRR, RF, 200mA Low-Dropout Linear Regulators in NanoStar™ Wafer Chip Scale and SOT-23 datasheet (Rev. N) | PDF | HTML | 2025. 1. 28 | ||
| * | 방사능 및 안정성 보고서 | TPS793285YEQ Reliability Report | 2003. 10. 10 | |||
| 애플리케이션 노트 | Cyclone™ III FPGA Starter Kit Power Reference Design | 2008. 3. 27 | ||||
| 사용 설명서 | DEM-SOT23LDO Demonstration Fixture User's Guide (Rev. A) | 2005. 6. 2 | ||||
| 애플리케이션 노트 | NanoStar™ Wafer Chip-Scale Package Design Guide | 2003. 9. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-SOT23LDO — DEM-SOT23LDO 호환 최대 양극 출력 LDO 레귤레이터(5 또는 6 리드 SOT23(DBV) 패키지)
TMDXEVM368 — TMS320DM36x 평가 모듈
개발자는 TMS320DM36x DVEVM(디지털 비디오 평가 모듈)을 사용하면 TI의 디지털 미디어(DMx) 프로세서를 즉시 평가하고 IP 보안 카메라, 액션 카메라, 드론, 웨어러블 디지털 사이니지, 비디오 초인종 및 기타 디지털 비디오 제품과 같은 디지털 비디오 애플리케이션 빌드를 시작할 수 있습니다.
개발자는 TMS320DM36x DVEVM을 통해 생산 준비가 완료된 ARM용 애플리케이션 코드를 작성할 수 있고 DMx API를 사용하는 HDVICP 코프로세서 코어에 액세스하여 TMS320DM368 및 TMS320DM365 (...)
TPS79328EVM — TPS79328 평가 모듈
The purpose of this EVM is to facilitate evaluation of the TPS793xx family of LDO regulators. Each EVM package contains one SLVP191 test board, with either a TPS79301DBV linear regulator or a TPS79328DBV linear regulator, as well as supporting passive components. The TPS79301DBV adjustable device (...)
TIDA-00254 — DLP® 기술을 사용한 3D 머신 비전 애플리케이션을 위한 정확한 점 클라우드 생성
The 3D Machine Vision reference design employs Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) (...)
TIDA-00826 — 50Ohm, 2GHz 오실로스코프 프론트 엔드 레퍼런스 디자인
This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
TIDEP0014 — TMDXEVM437X 기반 듀얼 카메라 레퍼런스 디자인
Developers looking for camera support on the Sitara AM437x processors can use this reference design to jump start their development. The AM437x camera interface is a parallel port that can be configured as a single or dual camera interface. The dual camera configuration enables the use of two (...)
TIDEP0025 — 산업용 통신과 모터 제어용 단일 칩 드라이브
This reference design implements hardware interface based on the HEIDENHAIN EnDat 2.2 standard for position or rotary encoders. The platform also allows you to implement real-time EtherCAT communications standards in a broad range of industrial automation equipment. It enables designs with a low (...)
TIDEP0035 — HIPERFACE DSL 마스터 인터페이스가 통합된 ARM MPU 레퍼런스 디자인
이 레퍼런스 설계는 PRU-ICSS(산업용 통신 서브시스템)에서 HIPERFACE DSL 마스터 프로토콜을 구현합니다. 2선 인터페이스를 통해 위치 피드백 와이어를 모터 케이블에 통합할 수 있습니다. AM437x PRU-ICSS 펌웨어와 TIDA-00177 트랜시버 레퍼런스 설계로 구성됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.