홈 전력 관리 선형 및 저손실(LDO) 레귤레이터
홈
전력 관리
선형 및 저손실(LDO) 레귤레이터

TPS7A3501

활성

1A, 저잡음, 조정 가능한 저손실 전압 레귤레이터(활성화 지원)

지금 주문
데이터 시트

TPS7A3501

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Vin (max) (V) 5 Vin (min) (V) 1.7 Iout (max) (A) 1 Output options Adjustable Output Vout (max) (V) 4.5 Vout (min) (V) 1.2 Noise (µVrms) 3.8 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 2.2 Features Enable, Foldback Overcurrent protection Thermal resistance θJA (°C/W) 67 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Dropout voltage (Vdo) (typ) (mV) 330 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 5 Vin (min) (V) 1.7 Iout (max) (A) 1 Output options Adjustable Output Vout (max) (V) 4.5 Vout (min) (V) 1.2 Noise (µVrms) 3.8 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 2.2 Features Enable, Foldback Overcurrent protection Thermal resistance θJA (°C/W) 67 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Dropout voltage (Vdo) (typ) (mV) 330 Operating temperature range (°C) -40 to 125
WSON (DRV) 6 4 mm² 2 x 2
  • Regulates Input-to-Output Voltage:
    • User-Programmable Input-to-Output Voltage
      Regulation Range:
      200 mV to 500 mV
  • Power-Supply Rejection Ratio:
    • 42 dB at 1 MHz
    • ≥ 32 dB (360 kHz to 3.9 MHz)
  • Low-Noise Output:
    • 3.8 µVRMS (10 Hz to 100 kHz)
  • Output Current: Up to 1 A
  • Output Voltage Range: 1.21 V to 4.5 V
  • Excellent Load Transient Response
  • Stable With Ceramic Capacitors as Low as
    10 µF
  • Current Limit and Thermal Shutdown for
    Fault Protection
  • Available in a Low Thermal Resistance Package:
    2-mm × 2-mm WSON-6
  • Operating Temperature Range:
    –40°C to 125°C
  • Regulates Input-to-Output Voltage:
    • User-Programmable Input-to-Output Voltage
      Regulation Range:
      200 mV to 500 mV
  • Power-Supply Rejection Ratio:
    • 42 dB at 1 MHz
    • ≥ 32 dB (360 kHz to 3.9 MHz)
  • Low-Noise Output:
    • 3.8 µVRMS (10 Hz to 100 kHz)
  • Output Current: Up to 1 A
  • Output Voltage Range: 1.21 V to 4.5 V
  • Excellent Load Transient Response
  • Stable With Ceramic Capacitors as Low as
    10 µF
  • Current Limit and Thermal Shutdown for
    Fault Protection
  • Available in a Low Thermal Resistance Package:
    2-mm × 2-mm WSON-6
  • Operating Temperature Range:
    –40°C to 125°C

The TPS7A3501 is a positive voltage, low-noise
(3.8-µVRMS) power filter capable of sourcing a 1-A load suitable for quiet supply solutions. Power filters, such as the TPS7A3501, provide voltage regulation across the input and output terminals with high efficiency (low insertion loss), and power-supply rejection. The device is ideally suited as a noise filter for 3.3-V, 2.5-V, and 1.8-V supplies at up to 1 A.

The input-to-output voltage regulation is also user-programmable, from 200 mV to 500 mV, with a single external resistor. If no resistor is used, the TPS7A3501 provides 330 mV of input-to-output voltage regulation. The device is stable with 10-µF input and output ceramic capacitors and a 10-nF noise-reduction ceramic capacitor.

The TPS7A3501 is fully specified over a wide temperature of –40°C to 125°C. The device is offered in a low thermal resistance, 2-mm × 2-mm, WSON-6 package. Unlike passive filters, the TPS7A3501 provides thermal and current protection for itself and surrounding circuitry.

The TPS7A3501 is a positive voltage, low-noise
(3.8-µVRMS) power filter capable of sourcing a 1-A load suitable for quiet supply solutions. Power filters, such as the TPS7A3501, provide voltage regulation across the input and output terminals with high efficiency (low insertion loss), and power-supply rejection. The device is ideally suited as a noise filter for 3.3-V, 2.5-V, and 1.8-V supplies at up to 1 A.

The input-to-output voltage regulation is also user-programmable, from 200 mV to 500 mV, with a single external resistor. If no resistor is used, the TPS7A3501 provides 330 mV of input-to-output voltage regulation. The device is stable with 10-µF input and output ceramic capacitors and a 10-nF noise-reduction ceramic capacitor.

The TPS7A3501 is fully specified over a wide temperature of –40°C to 125°C. The device is offered in a low thermal resistance, 2-mm × 2-mm, WSON-6 package. Unlike passive filters, the TPS7A3501 provides thermal and current protection for itself and surrounding circuitry.
filter 기타 선형 및 저손실(LDO) 레귤레이터 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
6개 모두 보기
유형 직함 날짜
* Data sheet TPS7A3501 High PSRR, Low-Noise, 1-A Power Filter datasheet (Rev. B) PDF | HTML 2014/07/18
Application note A Topical Index of TI LDO Application Notes (Rev. F) 2019/06/27
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018/03/21
Technical article What floats your boat? Exploring linear regulators in medical ultrasound PDF | HTML 2017/05/12
White paper How to measure LDO noise 2015/07/24
User guide TPS7A3501EVM-547 Evaluation Module 2013/05/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

TPS7A3501 PSpice Transient Model

SBVM378.ZIP (131 KB) - PSpice Model
다운로드
시뮬레이션 모델

TPS7A3501 TINA-TI Transient Reference Design

SBVM422.ZIP (15 KB) - TINA-TI Reference Design
다운로드
시뮬레이션 모델

TPS7A3501 TINA-TI Transient Spice Model

SBVM421.ZIP (9 KB) - TINA-TI Spice Model
다운로드
레퍼런스 디자인

PMP10600 — Xilinx® Zynq® 7000 시리즈(XC7Z015) 전원 솔루션, 5W - 레퍼런스 디자인

The PMP10600.1 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA.   This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator.  It also features one LM3880 for power up and power (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP10601 — Xilinx® Zynq® 7000 시리즈(XC7Z015) 전원 솔루션, 8W - 레퍼런스 디자인

The PMP10601 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015)  FPGA.   This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA.  It also (...)
Test report: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WSON (DRV) 6 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상