TPS7N59
- Input voltage range: 0.7V to 6.0V
- Output voltage noise: 2.5µVRMS
- 1% (max) accuracy over line, load, and temperature
- Low dropout: 150mV (typ) at 10A
- Power-supply rejection ratio (10A):
- 84dB at 1kHz
- 64dB at 10kHz
- 49dB at 100kHz
- 30dB at 1MHz
- Excellent load transient response:
- ±20mV with a 10mA to 10A load step
- Adjustable output voltage range: 0.5V to 5.2V
- Adjustable soft-start inrush control
- BIAS rail: 3V to 12V external rail
- Open-drain, power-good (PG) output
- Package: 4mm × 4mm, 24-pin WQFN
- EVM RθJA: 14.3°C/W
The TPS7N59 is a low-noise (2.5µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 10A with only 150mV of dropout, independently of the output voltage. The device output voltage is adjustable from 0.5V to 5.2V using a single external resistor. The combination of low noise, high PSRR (30 dB at 1MHz), and high output-current capability makes the TPS7N59 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.
Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide good system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializer/deserializers (SerDes), FPGAs, and DSPs.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7N59 10A, Low-VIN , Low-Noise, High-Accuracy, Ultra-Low Dropout (LDO) Voltage Regulator datasheet (Rev. A) | PDF | HTML | 2026. 3. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7N59EVM-184 — TPS7N59 평가 모듈
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
병렬 저손실(LDO) 계산기는 밸러스트 저항을 사용하여 병렬 LDO 레귤레이터에 대한 최악의 분석을 제공하는 Microsoft® Excel® 기반 툴입니다. 이 툴은 사용자가 시스템 요구 사항 세트에 필요한 병렬 LDO 레귤레이터의 최소 수와 최적의 밸러스트 저항을 식별하는 데 도움이 됩니다.
병렬 애플리케이션에 사용되는 일반적인 LDO 레귤레이터에 대한 데이터 시트 정보는 계산기에 미리 채워져 있습니다. 사용자는 시스템 요구 사항을 기반으로 시스템 요구 사항에 가장 잘 맞는 LDO 레귤레이터 디바이스를 평가할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTW) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.