AFE7955
- Request full data sheet
- Dual RF sampling 12GSPS transmit DACs
- Triple RF sampling 3GSPS receive ADCs
- Maximum RF signal bandwidth: 1200MHz
- RF frequency range: 600MHz - 12GHz
- Digital step attenuators (DSA):
- TX: 40dB range, 0.125dB steps
- RX: 25dB range, 0.5dB steps
- Single or dual-band DUC or DDCs
- 16x NCOs per TX or RX
- Optional Internal PLL or VCO for DAC or ADC clocks or external clock at DAC or ADC sample rate
- SerDes data interface:
- JESD204B and JESD204C compatible
- 8 SerDes transceivers up to 29.5Gbps
- Subclass 1 multi-device synchronization
- Package: 17mm × 17mm FCBGA, 0.8mm pitch
The AFE7955 is a high performance, wide bandwidth multi-channel transceiver, integrating two RF sampling transmitter chains and 3 RF sampling receiver chains. With operation up to 12GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.
The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth per TX channel. The output of the DUCs drives a 12-GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40dB range and 1-dB analog and 0.125dB digital steps.
Two receiver chains includes a 25dB range DSA (Digital Step Attenuator), followed by a 3GSPS ADC (analog-to-digital converter). The two receiver channels have an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of signal bandwidth of up to 1200MHz per RX channel.
An additional receiver channel has a single wideband DDC supporting up to 1200MHz bandwidth.

技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | AFE7955 2T3R RF Sampling AFE with 12GSPS DACs and 3GSPS ADCs datasheet (Rev. A) | PDF | HTML | 2025年 5月 2日 |
Application note | AFE79XX as a Chirp Signal Generator | PDF | HTML | 2024年 7月 10日 | |
Application note | AFE79xx as Single Chip Wideband Repeater Solution (Rev. A) | PDF | HTML | 2023年 5月 30日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AFE7950EVM — 適用於四傳輸、六接收、X 頻段、射頻取樣 AFE 的 AFE7950 評估模組
AFE7950 系列評估模組 (EVM) 是靈活的射頻取樣收發器平台,可配置為支援最多同時四個發射、四個接收與兩個回饋 (4T4R+2FB) 通道。此 EVM 設計可介接以下所示 TI 模式/擷取卡解決方案 (分開販售) 以及許多符合 FPGA FMC 標準的開發套件。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
FCBGA (ABJ) | 400 | Ultra Librarian |
FCBGA (ALK) | 400 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點