設計工具
DAC39RF20-DESIGN — DAC39RF20 Design Resources
Additional design and development resources
產品規格表
DAC39RF20
- 16-bit Multi-Nyquist DAC core
- DAC sample rate:
- NRZ, RF Modes: 22GSPS
- DES2xL, DES2xH modes: 44GSPS
- Maximum input data rate:
- 12-bit, Dual channel: 21GSPS/ch
- 16-bit, Dual channel: 15.75GSPS/ch
- 16-bit, Single channel: 22GSPS
- Output frequency range: >18GHz
- Performance at fOUT = 10GHz, DES2xL mode
- Noise floor (small signal): –170dBFS/Hz
- SFDR (-0.1dBFS) : –55dBc
- IMD3 (-7dBFS each tone) : –60dBc
- Additive phase noise, 10kHz offset: -132dBc/Hz
- Optional PLL/VCO for DAC clock generation
- Four integrated digital up-converters (DUC)
- Interpolation: 1x, 4x, 6x, 8x to 256x
- Complex baseband DUC for I/Q output
- Complex to real upconversion for direct RF sampling
- 64-bit frequency resolution NCOs
- Phase continuous, synchronous and reset options with frequency hopping
- Programmable FIR equalizer at DUC input or DAC input
- Direct digital synthesis (DDS) functions
- Four piecewise linear waveform generators
- 16 Prestored waveforms
- 256 Total vectors
- Automatic or synchronous external triggers
- Frequency, amplitude, phase interface streaming
- Four piecewise linear waveform generators
- JESD204C Interface
- 16 Lanes at up to 32.5Gbps
- Class C-S, subclass-1 compatible
- Automatic clock and SYSREF calibration and tracking
The DAC39RF20 is a single and dual channel digital-to-analog converter (DAC) with 16-bit resolution. With an external full rate clock, the devices support 22GSPS with single edge sampling modes (NRZ and RF) and 44GSPS in dual edge sampling modes (DES2XL, DES2XH). When using the internal PLL/VCO, the devices support 17GSPS with single edge sampling modes (NRZ and RF) and 34GSPS in dual edge sampling modes (DES2XL, DES2XH). The devices can be used as noninterpolating or interpolating DACs for either direct RF sampling or complex baseband signal generation. The maximum input data rate for two channels is 21GSPS (12-bit resolution) or 15.75GSPS (16-bit resolution). The maximum rate for one channel is 22GSPS (16-bit resolution). The device can generate signals greater than 10GHz bandwidth at frequencies exceeding 20GHz, enabling direct sampling through Ku band.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DAC39RF20: 22GSPS or 44GSPS, 16-bit, Single and Dual Channel, Multi-Nyquist Digital-to-Analog Converter (DAC) with JESD204C Interface datasheet | PDF | HTML | 2025年 6月 4日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DAC39RF20EVM — DAC39RF20 評估模組
The DAC39RF20EVM is an evaluation module (EVM) for evaluating the DAC39RF20 family of digital-to-analog converters (DACs) from Texas Instruments. The EVM can be used to evaluate the performance of the DAC up to 22GSPS sampling rate. The EVM is designed to work with the field-programmable gate array (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (ANH) | 289 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。