首頁 感測器 溫度感測器 類比溫度感測器
首頁
感測器
溫度感測器
類比溫度感測器

LMT70A

現行

±0.1°C 匹配準確度精密類比溫度感測器

立即訂購
產品規格表

LMT70A

現行
產品規格表 立即訂購

產品詳細資料

Local sensor accuracy (max) 0.13 Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 2 Supply voltage (max) (V) 5.5 Supply current (max) (µA) 12 Interface type Analog output Sensor gain (mV/°C) -5.19 Rating Catalog
Local sensor accuracy (max) 0.13 Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 2 Supply voltage (max) (V) 5.5 Supply current (max) (µA) 12 Interface type Analog output Sensor gain (mV/°C) -5.19 Rating Catalog
DSBGA (YFQ) 4 1 mm² 1 x 1
  • Accuracy:
    • ±0.05°C (typ) or ±0.13°C (max) from 20°C to 42°C
    • ±0.2°C (max) from -20°C to 90°C
    • ±0.23°C (max) from 90°C to 110°C
    • ±0.36°C (max) from -55°C to 150°C
  • Wide Temperature Range: −55°C to 150°C
  • Matching of Two Adjacent LMT70A on Tape and Reel: 0.1°C (max) at 30°C
  • Very Linear Analog Temperature Sensor with Output Enable Pin
  • NTC Output Slope: -5.19 mV/°C
  • Output On/Off Switch with RDS on < 80 Ω
  • Wide Power Supply Range: 2.0 V to 5.5 V
  • Low Power Supply Current: 9.2 µA (typ)12 µA (max)
  • Ultra Small 0.88 mm by 0.88 mm 4-bump WLCSP (DSBGA) Package

All trademarks are the property of their respective owners.

  • Accuracy:
    • ±0.05°C (typ) or ±0.13°C (max) from 20°C to 42°C
    • ±0.2°C (max) from -20°C to 90°C
    • ±0.23°C (max) from 90°C to 110°C
    • ±0.36°C (max) from -55°C to 150°C
  • Wide Temperature Range: −55°C to 150°C
  • Matching of Two Adjacent LMT70A on Tape and Reel: 0.1°C (max) at 30°C
  • Very Linear Analog Temperature Sensor with Output Enable Pin
  • NTC Output Slope: -5.19 mV/°C
  • Output On/Off Switch with RDS on < 80 Ω
  • Wide Power Supply Range: 2.0 V to 5.5 V
  • Low Power Supply Current: 9.2 µA (typ)12 µA (max)
  • Ultra Small 0.88 mm by 0.88 mm 4-bump WLCSP (DSBGA) Package

All trademarks are the property of their respective owners.

The LMT70 is an ultra-small, high-precision, low-power CMOS analog temperature sensor with an output enable pin. Applications for the LMT70 include virtually any type of temperature sensing where cost-effective, high precision and low-power are required, such as Internet of Things (IoT) sensor nodes, medical thermometers, high-precision instrumentation and battery powered devices. The LMT70 is also a great replacement for RTD and precision NTC/PTC thermistors.

Its output enable pin allows multiple LMT70s to share one ADC channel, thus simplifying ADC calibration and reducing the overall system cost for precision temperature sensing. The LMT70 also has a linear and low impedance output allowing seamless interface to an off-the-shelf MCU/ADC. Dissipating less than 36µW, the LMT70 has ultra-low self-heating supporting its high-precision over a wide temperature range.

The LMT70A provides unparalleled temperature matching performance of 0.1°C (max) for two adjacent LMT70A's picked from the same tape and reel. Therefore, the LMT70A is an ideal solution for energy metering applications requiring heat transfer calculations.

The LMT70 is an ultra-small, high-precision, low-power CMOS analog temperature sensor with an output enable pin. Applications for the LMT70 include virtually any type of temperature sensing where cost-effective, high precision and low-power are required, such as Internet of Things (IoT) sensor nodes, medical thermometers, high-precision instrumentation and battery powered devices. The LMT70 is also a great replacement for RTD and precision NTC/PTC thermistors.

Its output enable pin allows multiple LMT70s to share one ADC channel, thus simplifying ADC calibration and reducing the overall system cost for precision temperature sensing. The LMT70 also has a linear and low impedance output allowing seamless interface to an off-the-shelf MCU/ADC. Dissipating less than 36µW, the LMT70 has ultra-low self-heating supporting its high-precision over a wide temperature range.

The LMT70A provides unparalleled temperature matching performance of 0.1°C (max) for two adjacent LMT70A's picked from the same tape and reel. Therefore, the LMT70A is an ideal solution for energy metering applications requiring heat transfer calculations.
open-in-new 尋找其它 類比溫度感測器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
LM94023 現行 具多增益、AB 類類比輸出和 WCSP 的 ± 1.5 ° C 溫度感測器 Similar sensor gain (-5.5 mV/°C) in similar package. Lower accuracy (±1.5°C) for cost-optimized designs
LMT70 現行 0.1C 類比溫度感測器、-5.19 mV/C、高精度配對、輸出啟用針腳 Exact equivalent without device-to-device matching
功能相似於所比較的產品
TMP117 現行 0.1°C 數位溫度感測器、48 位元 EEPROM、PT100/PT1000 RTD 替代品 Digital output (I2C) temperature sesor with 0.1°C accuracy
最新 TMP119 現行 ±0.08°C 精度的數位溫度感測器，採用 WCSP 封裝，具有增強的應變容限 Digital output (I2C) temperature sesor with 0.08°C accuracy

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LMT70, LMT70A ±0.05°C Precision Analog Temperature Sensor, RTD and Precision NTC Thermistor IC datasheet (Rev. A) PDF | HTML 2015年 5月 11日
Application note SC Temp Sensors Challenge Precision RTDs and Thermistors in Build Automation (Rev. A) 2019年 5月 8日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMT70EVM — 具有輸出啟用功能的 LMT70 精密類比輸出溫度感測器評估模組

The LMT70EVM allows users to evaluate the performance of the LMT70 temperature sensor. The EVM comes in a USB stick form factor package with an onboard MSP430F5528 microcontroller that interfaces with both the USB port and the LMT70 device. The EVM also comes with perforated slots that the user can (...)

使用指南: PDF
TI.com 無法提供
支援軟體

SNIC010 — LMT70EVM Installer v1.4.0.0

lock = 需要匯出核准 (1 分鐘)
支援產品和硬體

支援產品和硬體

產品
類比溫度感測器
LMT70 — 0.1C 類比溫度感測器、-5.19 mV/C、高精度配對、輸出啟用針腳 LMT70A — ±0.1°C 匹配準確度精密類比溫度感測器
硬體開發
開發板
LMT70EVM — 具有輸出啟用功能的 LMT70 精密類比輸出溫度感測器評估模組
lock 下載
參考設計

TIDA-00838 — 具有 wM-Bus (868 MHz) 的暖氣費計費器參考設計

The TIDA-00838 reference design implements a heat cost allocator system following the EN834 standard with the “two-sensor measurement method". The solution achieves better than 0.5 degrees Celsius accuracy across a range of +20 to +85°C. Two analog temperature sensors are available as (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00646 — 適用於暖氣費計費器的精確比對溫度感測參考設計

The TIDA-00646 reference design demonstrates techniques for precision temperature sensing as required by heat cost llocators and other Internet of Things (IoT) applications. Heat cost allocators use the temperature differential between Room and Heater body to assign a share of the total cost of a (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01212 — 單路雙向紅外線 LED 通訊埠參考設計

The TIDA-01212 reference design provides a ultra-low power yet simple and low-cost solution for adding a bi-directional IrDA PHY link at 9600 bps to any Smart Metering or sub-metering device. Using a single IR LED, a resistor and internal 1.27 V reference, controlled by an optimized software (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00848 — 使用 GPIO 針腳提高系統靈活性的分段式 LCD 控制參考設計

The TIDA-00848 reference design provides an innovative solution for adding LCD functionality to any Smart Grid or IoT application, where seven-segment LCD operation is required but the LCD dsiplay does not have to be always on. Using a few resistors and optimized GPIO control software on a CC1310 (...)
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
DSBGA (YFQ) 4 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片