Startseite Energiemanagement AC/DC & DC/DC controllers (external FET)
Startseite
Energiemanagement
AC/DC & DC/DC controllers (external FET)

LM5176

AKTIV

Synchroner Abwärts-Aufwärtsregler mit breitem Eingangsspannungsbereich bis 55 V, 4 Schalter

Jetzt bestellen
Datenblatt

LM5176

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Vin (min) (V) 4.2 Vin (max) (V) 55 Operating temperature range (°C) -40 to 125 Topology Buck-Boost Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.002 Duty cycle (max) (%) 100
Vin (min) (V) 4.2 Vin (max) (V) 55 Operating temperature range (°C) -40 to 125 Topology Buck-Boost Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.002 Duty cycle (max) (%) 100
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 VQFN (RHF) 28 20 mm² 5 x 4
  • Functional Safety-Capable
  • Single inductor buck-boost controller for step-up/step-down DC/DC conversion
  • Wide VIN: 4.2 V (2.5 V with bias) to 55 V (60 V maximum)
  • Flexible VOUT: 0.8 V to 55 V
  • VOUT short protection
  • High efficiency buck-boost transition
  • Adjustable switching frequency
  • Optional frequency sync and dithering
  • Integrated 2-A MOSFET gate drivers
  • Cycle-by-cycle current limit and optional hiccup
  • Optional input or output average current limiting
  • Programmable input UVLO and soft start
  • Power Good and output overvoltage protection
  • Available in HTSSOP-28 and QFN-28 packages
  • Create a custom design using the LM5176 with the WEBENCH Power Designer
  • Functional Safety-Capable
  • Single inductor buck-boost controller for step-up/step-down DC/DC conversion
  • Wide VIN: 4.2 V (2.5 V with bias) to 55 V (60 V maximum)
  • Flexible VOUT: 0.8 V to 55 V
  • VOUT short protection
  • High efficiency buck-boost transition
  • Adjustable switching frequency
  • Optional frequency sync and dithering
  • Integrated 2-A MOSFET gate drivers
  • Cycle-by-cycle current limit and optional hiccup
  • Optional input or output average current limiting
  • Programmable input UVLO and soft start
  • Power Good and output overvoltage protection
  • Available in HTSSOP-28 and QFN-28 packages
  • Create a custom design using the LM5176 with the WEBENCH Power Designer

The LM5176 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5176 operates over a wide input voltage range of 4.2 V to 55 V (60-V absolute maximum) to support a variety of applications.

The LM5176 uses current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.

The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5176 features optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.

The LM5176 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5176 operates over a wide input voltage range of 4.2 V to 55 V (60-V absolute maximum) to support a variety of applications.

The LM5176 uses current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.

The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5176 features optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.
open-in-new Andere AC/DC & DC/DC controllers (external FET) suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
NEU LM51772 VORSCHAU 55V wide VIN four-switch buck-boost controller with I2C interface New device with lower Vin range and programmable output current limit ranging from 1 A to 5 A

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 12
Typ Titel Datum
* Data sheet LM5176 55-V Wide VIN Synchronous 4-switch Buck-boost Controller datasheet (Rev. D) PDF | HTML 10 Aug 2021
Application note Bidirectional TEC Driver Design for 40-W TEC PDF | HTML 02 Jun 2023
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 21 Apr 2021
Functional safety information LM5176 and LM5176-Q1 Functional Safety, FIT Rate, Failure FMD 22 Mai 2020
Technical article Adjusting VOUT in USB Type-C™ and wireless charging applications, part 2 PDF | HTML 18 Feb 2020
Technical article Adjusting VOUT in USB Type-C™ and wireless charging applications, part 1 PDF | HTML 10 Feb 2020
Technical article Four-switch buck-boost layout tip No. 4: routing gate-drive and return paths PDF | HTML 20 Feb 2019
Application note A Method to Improve LM5176 Overcurrent Protection Feature 08 Aug 2018
Application note LM5176 Power Sharing Between Two Parallel, Four-Switch Buck-Boost Converters 16 Jul 2018
White paper An overview of radiated EMI specifications for power supplies 05 Jun 2018
White paper An overview of conducted EMI specifications for power supplies 01 Feb 2018
EVM User's guide LM5176 Wide-VIN Buck-Boost Controller EVM 02 Mai 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM5176EVM-HP — LM5176 Abwärts/Aufwärtswandler mit großem VIN – Evaluierungsmodul

The LM5176EVM-HP demonstrates a flexible high power buck-boost design using the LM5176 wide-vin buck-boost controller. The evaluation module is configured to operate from an input voltage range of 6V-36V and to provide a regulated 12-V output with up to 12A of load current.
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

LM5176 PSpice Transient Model (Rev. B)

SNVMBA4B.ZIP (147 KB) - PSpice Model
Herunterladen
Simulationsmodell

LM5176 PSpice Transient Model (Rev. C)

SNVMBA4C.ZIP (120 KB) - PSpice Model
Herunterladen
Berechnungstool

SNVC208 — LM5176 Design Calculator

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC & DC/DC controllers (external FET)
LM34936-Q1 — 30-V-Synchron-Abwärts/Aufwärtswandler mit 4 Schaltern und großem Vin LM5176 — Synchroner Abwärts-Aufwärtsregler mit breitem Eingangsspannungsbereich bis 55 V, 4 Schalter LM5176-Q1 — Synchroner Abwärts-Aufwärtsregler, großer VIN-Bereich bis 55 V, 4 Schalter, AEC-Q100-qualifiziert
Herunterladen
Referenzdesigns

PMP22125 — Referenzdesign für Batterie-Backup-Schalter, Ladegerät und Monitor

A complete battery back-up, charger and monitoring is implemented with this reference design.  It includes switching between a 12/24-Vdc source and 12/24-V lead acid battery, constant current battery charging at 1A typical, battery maintenance float charge and monitoring circuits for the (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP21697 — Referenzdesign für Leistungswandler mit variabler Spannung, 5 bis 35 V, 300 W Spitze für Audioverstä

This reference design provides a variable output power for audio amplifiers from 5 V to 35 V controllable by a Pulse Width Modulator signal. The output power capability of 75 W RMS and 300 W peak is suitable for high power automotive audio amplifiers. Conversion is 4-switch Buck-Boost for greater (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP30549 — Hocheffizientes Referenzdesign für synchrone Abwärts-/Aufwärtswandler. 32 V/3 A und 4 Schaltern

This telecom reference design features a highly effective 100-W, 4-switch buck-boost. The converter allows to drive a 32-V RF LDMOS out of a wide input range 17 V to 57 V with peak efficiency 98% plus. An input filter is implemented to reduce conducted emissions to source. Additionally, a spread (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP21278 — 300 W, 12 Vout für Abwärts-Aufwärts-Industrie-PC-Referenzdesign mit 4 Schaltern

The PMP21278 reference design is a 300W power supply utilizing the LM5176 4-switch buck-boost controller for industrial applications. This design can operate from 9V to 50V. The design has a 12V output and capable of sourcing 25A continuous current. Switching frequency is set to 230kHz. PMP21278 (...)
Test report: PDF
Schaltplan: PDF
Gehäuse Pins Herunterladen
HTSSOP (PWP) 28 Optionen anzeigen
VQFN (RHF) 28 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos