DLPS206 May   2021 DLPC7540

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Power Electrical Characteristics
    6. 6.6  Pin Electrical Characteristics
    7. 6.7  DMD HSSI Electrical Characteristics
    8. 6.8  DMD Low-Speed LVDS Electrical Characteristics
    9. 6.9  V-by-One Interface Electrical Characteristics
    10. 6.10 FPD-Link LVDS Electrical Characteristics
    11. 6.11 USB Electrical Characteristics
    12. 6.12 System Oscillator Timing Requirements
    13. 6.13 Power Supply and Reset Timing Requirements
    14. 6.14 DMD HSSI Timing Requirements
    15. 6.15 DMD Low-Speed LVDS Timing Requirements
    16. 6.16 V-by-One Interface General Timing Requirements
    17. 6.17 FPD-Link Interface General Timing Requirements
    18. 6.18 Source Frame Timing Requirements
    19. 6.19 Synchronous Serial Port Interface Timing Requirements
    20. 6.20 Master and Slave I2C Interface Timing Requirements
    21. 6.21 Programmable Output Clock Timing Requirements
    22. 6.22 JTAG Boundary Scan Interface Timing Requirements (Debug Only)
    23. 6.23 JTAG ARM Multi-Ice Interface Timing Requirements (Debug Only)
    24. 6.24 Multi-Trace ETM Interface Timing Requirements
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Input Sources
      2. 7.3.2 Processing Delays
      3. 7.3.3 FPD-Link Interface
      4. 7.3.4 V-by-One interface
      5. 7.3.5 DMD (HSSI) Interface
      6. 7.3.6 Program Memory Flash Interface
      7. 7.3.7 GPIO Supported Functionality
      8. 7.3.8 Debug Support
    4. 7.4 Device Operational Modes
      1. 7.4.1 Standby Mode
      2. 7.4.2 Active Mode
        1. 7.4.2.1 Normal Configuration
        2. 7.4.2.2 Low Latency Configuration
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
  9. 9 Power Supply Recommendations
    1. 9.1 Power Supply Management
    2. 9.2 Hot Plug Usage
    3. 9.3 Power Supplies for Unused Input Source Interfaces
    4. 9.4 Power Supplies
      1. 9.4.1 1.15-V Power Supplies
      2. 9.4.2 1.21V Power Supply
      3. 9.4.3 1.8-V Power Supplies
      4. 9.4.4 3.3-V Power Supplies
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1  General Layout Guidelines
      2. 10.1.2  Power Supply Layout Guidelines
      3. 10.1.3  Layout Guidelines for Internal Controller PLL Power
      4. 10.1.4  Layout Guideline for DLPC7540 Reference Clock
        1. 10.1.4.1 Recommended Crystal Oscillator Configuration
      5. 10.1.5  V-by-One Interface Layout Considerations
      6. 10.1.6  FPD-Link Interface Layout Considerations
      7. 10.1.7  USB Interface Layout Considerations
      8. 10.1.8  DMD Interface Layout Considerations
      9. 10.1.9  General Handling Guidelines for Unused CMOS-Type Pins
      10. 10.1.10 Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
    2. 10.2 Thermal Considerations
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
      2. 11.1.2 Device Nomenclature
        1. 11.1.2.1 Device Markings
        2. 11.1.2.2 Package Data
    2. 11.2 Trademarks
    3. 11.3 Electrostatic Discharge Caution
    4. 11.4 Glossary
      1. 11.4.1 Video Timing Parameter Definitions
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Option Addendum

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.4 Thermal Information

THERMAL METRIC (1)TEST CONDITIONS (2)ZDCUNIT
P-HBGA676
676 PINS (576 Populated)
RθJAJunction-to-air thermal resistance (3)0 m/s of forced airflow, without heat-sink
1 m/s of forced airflow, without heat-sink
2 m/s of forced airflow, without heat-sink
1 m/s of forced airflow, with heat-sink, 7 W
2 m/s of forced airflow, with heat-sink, 7 W
1 m/s of forced airflow, with heat-sink,15 W
2 m/s of forced airflow, with heat-sink, 15 W		7.4
6.3
6.0
5.3
4.8
4.0
3.5		°C/W
RJCJunction-to-case thermal resistance (4)2.7°C/W
RJBJunction-to-board thermal resistance (4)3.5°C/W
ψJT(5)Temperature variance from junction to package top center temperature, per unit power dissipation.0 m/s of forced airflow, without heat-sink
1 m/s of forced airflow, without heat-sink
2 m/s of forced airflow, without heat-sink		0.6
0.6
0.6		°C/W
PMAXPackage - Maximum Power(3) (6)0 m/s of forced airflow, without heat-sink
1 m/s of forced airflow, without heat-sink
2 m/s of forced airflow, without heat-sink		8.10
9.52
10.00		W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
(2) These test conditions also included a PCB sized at 101.3mm x 152.4mm incorporating the recommended PCB thermal enhancements specified in Section 10.1.1. In addition, airflow is parallel to the board surface directed at the device.
(3) See Table 6-1 for thermal parameters based on the example heat-sinks listed below
  1. Heatsink-7 W: S1525-7W, Size = 25 mm x 25 mm x 7 mm, Pins = 7 x7 = 49 (Vendor: Alpha, Type S Series)
  2. Heatsink-15 W: S1530-15W, Size = 30 mm x 3 0mm x 15 mm, Pins = 8 x 8 = 64 (Vendor: Alpha, Type S Series)
(4) Due to the complex internal construction of the DLPC7540 controller, the RJC and RJB thermal coefficients do not always produce an accurate junction temperature estimate. A limited set of comparison scenario data shows that the RJC and RJB modeled junction temperature can have a +9% to -2% error vs the actual temperature. The amount of this error varies with the use and size of an external heat sink as well as the amount of external air flow. Validate all thermal estimates based on RJC and RJB with an actual temperature measurement at the top-center of the package plus the delta-temp defined by ψJT.
(5) Example: Using the power we expect of 11.31 W
11.31 W * 0.6 °C/W = 6.786 °C = > TC-max = 115 °C - ~7 °C = 108 °C
(6) PMAX = (TJ-max - TA-max) / RθJA
Table 6-1 Thermal Examples using Two Different Heat-sinks
THERMAL METRIC (1)TEST CONDITIONSZDCUNIT
P-HBGA676
676 PINS (576 Populated)
RθJAJunction-to-air thermal resistance1 m/s of forced airflow, with heat-sink, 7 W
2 m/s of forced airflow, with heat-sink, 7 W
1 m/s of forced airflow, with heat-sink, 15 W
2 m/s of forced airflow, with heat-sink, 15 W		5.3
4.8
4.0
3.5		°C/W
PMAXPackage - Maximum Power1 m/s of forced airflow, with heat-sink, 7 W
2 m/s of forced airflow, with heat-sink, 7 W
1 m/s of forced airflow, with heat-sink, 15 W
2 m/s of forced airflow, with heat-sink, 15 W		11.32
12.50
15.00
17.14		W
(1) This table show examples of what is achievable based on the two example heat-sinks.