SLUSG35A August 2026 – November 2026 TPS12S24F-Q1
ADVANCE INFORMATION
All off-board loads have different type. Each load profile interacts differently with the Smart High Side Switch or Controller and require different considerations to specify robust protection. Whether the load is resistive, capacitive, inductive, or does not fall neatly into one of those categories such as LEDs changes how driving the load must be approached and designed. The user must understand what load profile is expected, and then understand how that impacts the design of the output stage.
| TYPE OF LOAD | LOAD DRIVING METHOD | REGISTER SETTING |
|---|---|---|
| Capacitive Load, CAP_CHRG_CHx = 0x0, 0x1 or 0x3 | Using Short-circuit protection (SCP) based auto-retry method | CAP_CHRG_CHx = 0x0 INRUSH_DURATION_CHx = 0x0 to 0x7 (used only for VOUT_ERR_CHx indication) FWD_SCP_SET_CHx = 0x0 to 0xF AUTO_RETRY_DURATION_CHx = 0x0 to 0x3 LATCH_CHx = 0x0 FOLDBACK_LOCK_DIS_CHx = 0x1 |
| Using main path gate slew control | CAP_CHRG_CHx = 0x1 INRUSH_DURATION_CHx = 0x0 to 0x7 (used only for VOUT_ERR_CHx indication) | |
| Using main path PWM mode | CAP_CHRG_CHx = 0x3, PWM_DTY_CHx = 0x00 to 0xFF and PWM_FREQ_CHx = 0x0 to 0xF INRUSH_DURATION_CHx = 0x0 to 0x7 | |
| Resistive or Inductive Load | Using main path PWM method | CAP_CHRG_CHx = 0x0 PWM_EN_CHx = 0x1, PWM_DTY_CHx = 0x00 to 0xFF to and PWM_FREQ_CHx = 0x0 to 0xF |