SLUSG59A February   2026  – November 2026 BQ27Z855

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configurations and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Supply Current
    6. 5.6  1.8V LDO Regulator (REG18)
    7. 5.7  Low Frequency Oscillator (LFO)
    8. 5.8  High Frequency Oscillator (HFO)
    9. 5.9  PACK Clamp (PACK_CLAMP)
    10. 5.10 Analog-to-Digital Converter (VADC)
    11. 5.11 Coulomb Counter (CCADC)
    12. 5.12 Coulomb Counter Digital Filter (CC1)
    13. 5.13 Current Measurement Digital Filter (CC2)
    14. 5.14 Charge Current Measurement Digital Filter (CC3)
    15. 5.15 Wake-up Comparator (I-WAKE)
    16. 5.16 Internal Temperature Sensor (INT_TEMP)
    17. 5.17 Thermistor Measurement Support
    18. 5.18 Hardware-based Protection (SCOMP) Thresholds (OVP, UVP, OCC, OCD, SCD)
    19. 5.19 Hardware-based Protections (SCOMP) Timing (OVP, UVP, OCC, OCD, SCD)
    20. 5.20 Linear Battery Charger
    21. 5.21 CHG, DSG NFET Drivers
    22. 5.22 Zero-Volt Charging (ZVCHG)
    23. 5.23 General Purpose Input-Outputs (INT)
    24. 5.24 I2C Interface I/O (SDA, SCL)
    25. 5.25 I2C Interface Timing
    26. 5.26 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  BQ27Z855 Processor
      2. 6.3.2  Battery Parameter Measurements
        1. 6.3.2.1 Analog-to-Digital Converter (VADC)
        2. 6.3.2.2 VADC Multiplexer
        3. 6.3.2.3 Coulomb Counter (CCADC) and Digital Filter (CC1)
        4. 6.3.2.4 Internal Temperature Sensor (INT_TEMP)
        5. 6.3.2.5 External Temperature Sensor Support
      3. 6.3.3  Power Supply Control
      4. 6.3.4  ENAB Pin
      5. 6.3.5  I2C Bus Communication Interface
      6. 6.3.6  Low Frequency Oscillator (LFO)
      7. 6.3.7  High Frequency Oscillator (HFO)
      8. 6.3.8  Real Time Clock (RTC)
      9. 6.3.9  1.8V Low Dropout Regulator (REG18)
      10. 6.3.10 FET Drivers (CHG, DSG)
        1. 6.3.10.1 Charge (CHG) FET Driver
        2. 6.3.10.2 Discharge (DSG) FET Driver
      11. 6.3.11 Zero-volt Charging (ZVCHG)
      12. 6.3.12 Integrated Protections
        1. 6.3.12.1 Hardware-based Protections
          1. 6.3.12.1.1 Overvoltage Protection (OVP)
          2. 6.3.12.1.2 Undervoltage Protection (UVP)
          3. 6.3.12.1.3 Overcurrent in Charge Protection (OCC)
          4. 6.3.12.1.4 Overcurrent in Discharge Protection (OCD)
          5. 6.3.12.1.5 Short Circuit Current in Discharge Protection (SCD)
          6. 6.3.12.1.6 Wake-up Comparator (I-WAKE)
        2. 6.3.12.2 Firmware-based Protections
          1. 6.3.12.2.1 Primary Level Protection Features
          2. 6.3.12.2.2 Secondary Level Protection Features
      13. 6.3.13 Gas Gauging
      14. 6.3.14 Advanced Battery Algorithms
      15. 6.3.15 Integrated Current Limiter and Charge Control Features
        1. 6.3.15.1 Integrated Current Limiter
          1. 6.3.15.1.1 CHG FET Control
          2. 6.3.15.1.2 Linear Mode
            1. 6.3.15.1.2.1 Battery Charging Process
            2. 6.3.15.1.2.2 Zero-volt Charge (ZVCHG)
            3. 6.3.15.1.2.3 Precharge (PCHG)
            4. 6.3.15.1.2.4 Fast Charge (CC)
            5. 6.3.15.1.2.5 Taper-charge (CV)
            6. 6.3.15.1.2.6 Charge Termination (VCT)
            7. 6.3.15.1.2.7 Step-charging Profile Support
          3. 6.3.15.1.3 MINSYS Mode
          4. 6.3.15.1.4 Battery Supplement Mode
        2. 6.3.15.2 Interaction with a Smart Charger
      16. 6.3.16 Ideal Diode Mode
      17. 6.3.17 Lifetime Data Logging Features
      18. 6.3.18 Authentication
        1. 6.3.18.1 ECC ECDSA Authentication
        2. 6.3.18.2 SHA-256 Authentication
      19. 6.3.19 Over the Air (OTA) Field Updater
      20. 6.3.20 Configuration
        1. 6.3.20.1 Cell Voltage Measurements
        2. 6.3.20.2 Coulomb Counting
        3. 6.3.20.3 Temperature Measurements
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application Schematics
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 High-Current Path
          1. 7.2.2.1.1 Protection FETs
          2. 7.2.2.1.2 Battery Cell Connections
          3. 7.2.2.1.3 Sense Resistor
          4. 7.2.2.1.4 ESD Mitigation
        2. 7.2.2.2 Gas Gauge Circuit
          1. 7.2.2.2.1 Cell Voltage Measurement Interface
          2. 7.2.2.2.2 Coulomb Counter Interface
          3. 7.2.2.2.3 Temperature Measurement
          4. 7.2.2.2.4 1.8V Low Dropout Regulator (REG18)
          5. 7.2.2.2.5 I2C Communication (SDA, SCL)
          6. 7.2.2.2.6 Interrupt to Host Interface (INT)
        3. 7.2.2.3 Current Limiter Circuit
          1. 7.2.2.3.1 Protection FETs and Compatibility with BQ27Z855
          2. 7.2.2.3.2 CP Control Logic and Capacitor
          3. 7.2.2.3.3 Voltage-based Feedback Interface
          4. 7.2.2.3.4 Current-based Feedback Interface
            1. 7.2.2.3.4.1 Sense Resistor Impact on Current-based Feedback
            2. 7.2.2.3.4.2 Sense Resistor Impact on CHG FET State Transitions
          5. 7.2.2.3.5 BAT-PACK Dedicated Voltage Comparator (DCOMP)
            1. 7.2.2.3.5.1 Impact of Sense Resistor Configuration on DCOMP Sensing
          6. 7.2.2.3.6 System-level Recommendations
      3. 7.2.3 Application Curves
  9. 8 Power Supply Recommendations
  10. 9 Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Third-Party Products Disclaimer
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 Trademarks
    4. 10.4 Electrostatic Discharge Caution
    5. 10.5 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1.     PACKAGE OPTION ADDENDUM
    2. 12.1 Tape and Reel Information
    3. 12.2 Mechanical Data

6.3.19 Over the Air (OTA) Field Updater

The BQ27Z855 device incorporates support for the optional field updater to allow the device to apply firmware changes in the field. The updates can upgrade device firmware version and apply modified configuration parameters while maintaining device specific data.

The Section 6.3.12.1 provide safety protection during OTA updates.

For more details on OTA updates on the BQ27Z855 device, refer to the BQ27Z855 Technical Reference Manual.