Product details

Vs (Min) (V) 7.5 Vs (Max) (V) 36 Offset voltage drift (+/-) (Max) (uV/degrees celsius) 1.5 Offset voltage (+/-) (Max) (uV) 25 Product type 2-wire RTD conditioner
Vs (Min) (V) 7.5 Vs (Max) (V) 36 Offset voltage drift (+/-) (Max) (uV/degrees celsius) 1.5 Offset voltage (+/-) (Max) (uV) 25 Product type 2-wire RTD conditioner
SOIC (D) 14 52 mm² 8.65 x 6

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
XTR101 ACTIVE Precision, Low Drift 4-20mA Two-Wire Transmitter 11.6V to 40V supply instead of 7.5V to 36V. 2 matched 1mA current sources instead of 250uA sources.
XTR105 ACTIVE 4-20mA Current Transmitter with Sensor Excitation and Linearization 2 800uA current sources instead of 250uA current sources.
Similar functionality to the compared device.
XTR108 ACTIVE 4-20mA, Two-Wire Transmitter 'Smart' Programmable with Signal Conditioning This device offers a sub-regulator (5-V), dual programable current sources, autozeroed PGA, 6-channel mux, linearization circuitry, and SPI interface.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet 4-20mA Current Transmitters with Sensor Excitation and Linearization datasheet 27 Sep 2000
Analog design journal 4Q 2011 Issue Analog Applications Journal 09 Nov 2011
Analog design journal Analog linearization of resistance temperature detectors 09 Nov 2011
Application note 20mA to 0-20mA Converter & Current Summing Current-to-Current Converters 02 Oct 2000

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DLPNIRSCANEVM — DLP® NIRscan™ Evaluation Module


The DLP NIRscan is a complete evaluation module (EVM) to design a high performance, affordable near-infrared spectrometer.  This flexible tool contains everything a designer needs to start developing a DLP-based spectrometer right out of the box.  The EVM features the DLP 0.45 WXGA NIR (...)

In stock
Limit: 1
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Calculation tool

XTR-ERROR-CALC — Free Tool: Current Transmitter Component Calculator

This spreadsheet calculates error for Current Transmitter (XTR) devices and external components.
Reference designs

TIPD202 — Analog Linearized 3-Wire PT1000 RTD to 2-Wire 4-20mA Current Loop Transmitter Reference Design

This design features a single-chip solution to linearize and transmit a 3-wire PT1000 RTD over the industry standard 2-wire 4-20mA current loop.  The design was configured for a -50°C to 250°C  temperature range, but other temperature ranges can be achieved by adjusting the (...)
Package Pins Download
SOIC (D) 14 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​