Startseite Batteriemanagement-ICs Batterieüberwachung & Ausgleichsregler
Startseite
Batteriemanagement-ICs
Batterieüberwachung & Ausgleichsregler
NEU

BQ79758B-Q1

AKTIV

ASIL-D-konformer 18-S-Präzisionsbatteriemonitor und Balancer mit Strommessung, Automobilindustrie

Jetzt bestellen
Datenblatt

BQ79758B-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Number of series cells (max) 18 Number of series cells (min) 9 Features Cell balancing, Current sense, High precision, I2C support, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 90 Communication interface Daisy chain, I2C controller, SPI controller, UART Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 5.1 TI functional safety category Functional Safety-Compliant
Rating Automotive Number of series cells (max) 18 Number of series cells (min) 9 Features Cell balancing, Current sense, High precision, I2C support, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 90 Communication interface Daisy chain, I2C controller, SPI controller, UART Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 5.1 TI functional safety category Functional Safety-Compliant
HTQFP (PAP) 64 144 mm² 12 x 12
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Measure 9 to 18 batteries in series per device, stackable up to 64 devices
  • Dedicated ADC with typical ±1mV accuracy
  • Two independent Current Sense ADCs with ±0.1% gain error drift and input range +/-275mV.
  • Programmable Over Current Detection comparators
  • Support limp home mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports busbar without affecting measurement accuracy
  • 10 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 300mA
    • User controlled PWM adjustment cell balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support Ring Architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • On chip memory for one time custom programming
  • Low power mode current <6µA
  • Compatible with BQ79600-Q1 with SPI/UART interface
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Measure 9 to 18 batteries in series per device, stackable up to 64 devices
  • Dedicated ADC with typical ±1mV accuracy
  • Two independent Current Sense ADCs with ±0.1% gain error drift and input range +/-275mV.
  • Programmable Over Current Detection comparators
  • Support limp home mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports busbar without affecting measurement accuracy
  • 10 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 300mA
    • User controlled PWM adjustment cell balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support Ring Architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • On chip memory for one time custom programming
  • Low power mode current <6µA
  • Compatible with BQ79600-Q1 with SPI/UART interface

The BQ79758B-Q1 provides high-accuracy cell voltage measurements for up to 18S battery modules in high-voltage battery management systems in xEV/EV. The monitor offers different channel options in the same package type, providing pin-to-pin compatibility and supporting high reuse of the established software and hardware across any platform. This device has a state-of-the-art ADC architecture/measurement system meeting stringent automotive standard and safety requirements. With the daisy-chain isolated by transformer (or capacitor), the device is designed for centralized or distributed architectures in xEV powertrain.

The BQ79758B-Q1 provides high-accuracy cell voltage measurements for up to 18S battery modules in high-voltage battery management systems in xEV/EV. The monitor offers different channel options in the same package type, providing pin-to-pin compatibility and supporting high reuse of the established software and hardware across any platform. This device has a state-of-the-art ADC architecture/measurement system meeting stringent automotive standard and safety requirements. With the daisy-chain isolated by transformer (or capacitor), the device is designed for centralized or distributed architectures in xEV powertrain.
filter Andere Batterieüberwachung & Ausgleichsregler suchen
Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Das vollständige Datenblatt ist verfügbar. Jetzt anfordern

Die Dokumente zur funktionalen Sicherheit sind verfügbar. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet BQ79758B-Q1 Functional Safety-Compliant Automotive 18S Battery Monitor With Current Sense datasheet PDF | HTML 13 Aug 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Treiber oder Bibliothek

BQ7971XB-Q1-DESIGN — BQ7971xB-Q1 Secure Resource folder

BQ7971xB-Q1 secure resources folder including datasheet, application notes, EVM userguides and other technical resources related to BQ7971xB-Q1
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Batterieüberwachung & Ausgleichsregler
BQ79716B-Q1 — 16-S-Präzisions-Batteriemonitor, Balancer und integrierter Protektor für die Automobilindustrie mit BQ79718B-Q1 — 18-S-Präzisionsbatteriemonitor, Balancer, integrierter Protektor nach ASIL D, Automobilindustrie BQ79758B-Q1 — ASIL-D-konformer 18-S-Präzisionsbatteriemonitor und Balancer mit Strommessung, Automobilindustrie
Anfordern
Treiber oder Bibliothek

BQ7971XB-Q1-FS — Functional Safety documentation for BQ7971XB-Q1

This secure folder stores Functional Safety document for BQ7971XB-Q1
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Batterieüberwachung & Ausgleichsregler
BQ79716B-Q1 — 16-S-Präzisions-Batteriemonitor, Balancer und integrierter Protektor für die Automobilindustrie mit BQ79718B-Q1 — 18-S-Präzisionsbatteriemonitor, Balancer, integrierter Protektor nach ASIL D, Automobilindustrie BQ79758B-Q1 — ASIL-D-konformer 18-S-Präzisionsbatteriemonitor und Balancer mit Strommessung, Automobilindustrie
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PAP) 64 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos