CDC5801A

Name: CDC5801A
Brand: TI
SKU: CDC5801A
Price: 4.233 USD

AKTIV

Jitterarmer Taktmultiplizierer & -Teiler mit programmierbarer Verzögerung & Phasenausrichtung

Jetzt bestellen

Datenblatt

document-pdfAcrobat Low Jitter Clock Multiplier & Divider w/Programmable Delay & Phase Alignment datasheet (Rev. A) (Englisch)

CDC5801A

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Clock generator, Spread-spectrum clock generator

Number of outputs

1

Output frequency (max) (MHz)

62.5

Core supply voltage (V)

3.3

Output supply voltage (V)

3.3

Input type

LVCMOS

Output type

LVDS, LVPECL, LVTTL

Operating temperature range (°C)

-40 to 85

Features

Pin programmable, Spread-spectrum clocking (SSC)

Rating

Catalog

Function

Clock generator, Spread-spectrum clock generator

Number of outputs

1

Output frequency (max) (MHz)

62.5

Core supply voltage (V)

3.3

Output supply voltage (V)

3.3

Input type

LVCMOS

Output type

LVDS, LVPECL, LVTTL

Operating temperature range (°C)

-40 to 85

Features

Pin programmable, Spread-spectrum clocking (SSC)

Rating

Catalog

SSOP (DBQ)

24

51.9 mm² 8.65 x 6

Low Jitter Clock Multiplier by x4, x6, x8. Input Frequency Range (19 MHz to 125 MHz). Supports Output Frequency From 150 MHz to 500 MHz
Fail-Safe Power Up Initialization
Low Jitter Clock Divider by /2, /3, /4. Input Frequency Range (50 MHz to 125 MHz). Supports Ranges of Output Frequency From 12.5 MHz to 62.5 MHz
2.6 mUI Programmable Bidirectional Delay Steps
Typical 8-ps Phase Jitter (12 kHz to 20 MHz) at 500 MHz
Typical 2.1-ps RMS Period Jitter (Entire Frequency Band) at 500 MHz
One Single-Ended Input and One Differential Output Pair
Output Can Drive LVPECL, LVDS, and LVTTL
Three Power Operating Modes to Minimize Power
Low Power Consumption (Typical 200 mW at 500 MHz)
Packaged in a Shrink Small-Outline Package (DBQ)
No External Components Required for PLL
Spread Spectrum Clock Tracking Ability to Reduce EMI
Applications: Video Graphics, Gaming Products, Datacom, Telecom
Accepts LVCMOS, LVTTL Inputs for REFCLK Terminal
Accepts Other Single-Ended Signal Levels at REFCLK Terminal by Programming Proper V_DDREF Voltage Level (For Example, HSTL 1.5 if V_DDREF = 1.6 V)
Supports Industrial Temperature Range of -40°C to 85°C

Low Jitter Clock Multiplier by x4, x6, x8. Input Frequency Range (19 MHz to 125 MHz). Supports Output Frequency From 150 MHz to 500 MHz
Fail-Safe Power Up Initialization
Low Jitter Clock Divider by /2, /3, /4. Input Frequency Range (50 MHz to 125 MHz). Supports Ranges of Output Frequency From 12.5 MHz to 62.5 MHz
2.6 mUI Programmable Bidirectional Delay Steps
Typical 8-ps Phase Jitter (12 kHz to 20 MHz) at 500 MHz
Typical 2.1-ps RMS Period Jitter (Entire Frequency Band) at 500 MHz
One Single-Ended Input and One Differential Output Pair
Output Can Drive LVPECL, LVDS, and LVTTL
Three Power Operating Modes to Minimize Power
Low Power Consumption (Typical 200 mW at 500 MHz)
Packaged in a Shrink Small-Outline Package (DBQ)
No External Components Required for PLL
Spread Spectrum Clock Tracking Ability to Reduce EMI
Applications: Video Graphics, Gaming Products, Datacom, Telecom
Accepts LVCMOS, LVTTL Inputs for REFCLK Terminal
Accepts Other Single-Ended Signal Levels at REFCLK Terminal by Programming Proper V_DDREF Voltage Level (For Example, HSTL 1.5 if V_DDREF = 1.6 V)
Supports Industrial Temperature Range of -40°C to 85°C

The CDC5801A device provides clock multiplication and division from a single-ended reference clock (REFCLK) to a differential output pair (CLKOUT/CLKOUTB). The multiply and divide terminals (MULT/DIV0:1) provide selection for frequency multiplication and division ratios, generating CLKOUT/CLOUTKB frequencies ranging from 12.5 MHz to 500 MHz with a clock input reference (REFCLK) ranging from 19 MHz to 125 MHz.

The implemented phase aligner provides the possibility to phase align (zero delay) between CLKOUT/CLKOUTB and REFCLK or any other CLK in the system by feeding the clocks that need to be aligned to the DLYCTRL and the LEADLAG terminals.

The phase aligner also allows the user to delay or advance the CLKOUT/CLKOUTB with steps of 2.6 mUI (unit interval). For every rising edge on the DLYCTRL terminal, the output clocks are delayed by 2.6-mUI step size as long as there is low on the LEADLAG terminal. Similarly, for every rising edge on the DLYCTRL terminal, the output clocks are advanced by 2.6-mUI step size as long as there is high on the LEADLAG terminal. The CDC5801A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions. As the phase between REFCLK and CLKOUT/CLKOUTB is random after power up, the application may implement a self calibration routine at power up to produce a certain phase start position, before programming a fixed delay with the clock on the DLYCTRL terminal.

Depending on the selection of the mode terminals (P0:2), the device behaves as a multiplier (by 4, 6, or 8) with the phase aligner bypassed or as a multiplier or divider with programmable delay and phase aligner functionality. Through the select terminals (P0:2) user can also bypass the phase aligner and the PLL (test mode) and output the REFCLK directly on the CLKOUT/CLKOUTB terminals. Through P0:2 terminals the outputs could be in a high impedance state. This device has another unique capability to be able to function with a wide band of voltages on the REFCLK terminal by varying the voltage on the V_DDREF terminal.

The CDC5801A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions.

The CDC5801A device is characterized for operation over free-air temperatures of –40°C to 85°C.

The CDC5801A device provides clock multiplication and division from a single-ended reference clock (REFCLK) to a differential output pair (CLKOUT/CLKOUTB). The multiply and divide terminals (MULT/DIV0:1) provide selection for frequency multiplication and division ratios, generating CLKOUT/CLOUTKB frequencies ranging from 12.5 MHz to 500 MHz with a clock input reference (REFCLK) ranging from 19 MHz to 125 MHz.

The implemented phase aligner provides the possibility to phase align (zero delay) between CLKOUT/CLKOUTB and REFCLK or any other CLK in the system by feeding the clocks that need to be aligned to the DLYCTRL and the LEADLAG terminals.

The phase aligner also allows the user to delay or advance the CLKOUT/CLKOUTB with steps of 2.6 mUI (unit interval). For every rising edge on the DLYCTRL terminal, the output clocks are delayed by 2.6-mUI step size as long as there is low on the LEADLAG terminal. Similarly, for every rising edge on the DLYCTRL terminal, the output clocks are advanced by 2.6-mUI step size as long as there is high on the LEADLAG terminal. The CDC5801A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions. As the phase between REFCLK and CLKOUT/CLKOUTB is random after power up, the application may implement a self calibration routine at power up to produce a certain phase start position, before programming a fixed delay with the clock on the DLYCTRL terminal.

Depending on the selection of the mode terminals (P0:2), the device behaves as a multiplier (by 4, 6, or 8) with the phase aligner bypassed or as a multiplier or divider with programmable delay and phase aligner functionality. Through the select terminals (P0:2) user can also bypass the phase aligner and the PLL (test mode) and output the REFCLK directly on the CLKOUT/CLKOUTB terminals. Through P0:2 terminals the outputs could be in a high impedance state. This device has another unique capability to be able to function with a wide band of voltages on the REFCLK terminal by varying the voltage on the V_DDREF terminal.

The CDC5801A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions.

The CDC5801A device is characterized for operation over free-air temperatures of –40°C to 85°C.

filter

Andere Taktgeneratoren suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	Low Jitter Clock Multiplier & Divider w/Programmable Delay & Phase Alignment datasheet (Rev. A)		13 Dez 2005

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

CDC5801A IBIS Model

SCAC070.ZIP (12 KB) - IBIS Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	Herunterladen
SSOP (DBQ)	24	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

CDC5801A

Jitterarmer Taktmultiplizierer & -Teiler mit programmierbarer Verzögerung & Phasenausrichtung

CDC5801A

Produktdetails

Technische Dokumentation

Design und Entwicklung

CDC5801A IBIS Model

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos