Startseite Sensoren Temperatursensoren Analoge Temperatursensoren
Startseite
Sensoren
Temperatursensoren
Analoge Temperatursensoren

LM50-Q1

AKTIV

Temperatursensor, Automotive Grade, ±3 °C Analog Ausgang, mit 10 mV/°C Gain

Jetzt bestellen
Datenblatt

LM50-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Local sensor accuracy (max) 3 Rating Automotive Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 4.5 Supply voltage (max) (V) 10 Supply current (max) (µA) 130 Interface type Analog output Sensor gain (mV/°C) 10 Features Industry standard pinout, UL recognized TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 3 Rating Automotive Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 4.5 Supply voltage (max) (V) 10 Supply current (max) (µA) 130 Interface type Analog output Sensor gain (mV/°C) 10 Features Industry standard pinout, UL recognized TI functional safety category Functional Safety-Capable
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • AEC-Q100 Qualified for automotive applications
    • LM50-Q1 (Grade-1): –40°C to +125°C operating temperature
    • Device HBM ESD classification level 2
  • Functional safety-capable
  • Industry-Standard Sensor Gain/Offset:
    • 10mV/°C, 500mV at 0°C
  • LM50-Q1 Temperature Accuracy:
    • ±3°C (Max) at 25°C
    • ±4°C (Max) over −40°C to 125°C
  • Operating supply range: 4.5V to 10V
  • Quiescent Current (Typ): 95µA
  • Available in Standard SOT23-3 package
  • Nonlinearity: ±0.8°C (Max)
  • DC Output Impedance: 2kΩ/4kΩ (typ/Max)
    • Enables driving large capacitive loads
  • UL Recognized Component
  • AEC-Q100 Qualified for automotive applications
    • LM50-Q1 (Grade-1): –40°C to +125°C operating temperature
    • Device HBM ESD classification level 2
  • Functional safety-capable
  • Industry-Standard Sensor Gain/Offset:
    • 10mV/°C, 500mV at 0°C
  • LM50-Q1 Temperature Accuracy:
    • ±3°C (Max) at 25°C
    • ±4°C (Max) over −40°C to 125°C
  • Operating supply range: 4.5V to 10V
  • Quiescent Current (Typ): 95µA
  • Available in Standard SOT23-3 package
  • Nonlinearity: ±0.8°C (Max)
  • DC Output Impedance: 2kΩ/4kΩ (typ/Max)
    • Enables driving large capacitive loads
  • UL Recognized Component

The LM50-Q1 device is an automotive-grade analog temperature sensor (AEC-Q100 Grade 1 qualified) that can measure temperatures from -40°C to 125°C using a single positive supply. The output voltage of the device is linearly proportional to temperature (10mV/°C) and has a DC offset of 500mV at 0°C. The offset allows reading negative temperatures without the need for a negative supply. The output voltage of the LM50-Q1 ranges from 100mV (at –40°C) to 1.75V (at 125°C), simplifying automotive ADC interfacing (including ADC integrated in MCU).

Unlike NTC thermistors, LM50-Q1 does not require any external calibration, trimming or software linearization leading to simplifying the circuitry requirements in a single supply environment. Due to low quiescent current of LM50-Q1 (typically around 95µA), self-heating is limited to a very low 0.2°C (in still air) and the device is ideal for automotive applications such as ECUs. Trimming and calibration of LM50-Q1 at the wafer level verify low cost and consistent accuracy: (±3°C at 25°C, ±4°C across –40°C to 125°C). Functional safety documentation is also available for systems requiring enhanced reliability.

The LM50-Q1 device is an automotive-grade analog temperature sensor (AEC-Q100 Grade 1 qualified) that can measure temperatures from -40°C to 125°C using a single positive supply. The output voltage of the device is linearly proportional to temperature (10mV/°C) and has a DC offset of 500mV at 0°C. The offset allows reading negative temperatures without the need for a negative supply. The output voltage of the LM50-Q1 ranges from 100mV (at –40°C) to 1.75V (at 125°C), simplifying automotive ADC interfacing (including ADC integrated in MCU).

Unlike NTC thermistors, LM50-Q1 does not require any external calibration, trimming or software linearization leading to simplifying the circuitry requirements in a single supply environment. Due to low quiescent current of LM50-Q1 (typically around 95µA), self-heating is limited to a very low 0.2°C (in still air) and the device is ideal for automotive applications such as ECUs. Trimming and calibration of LM50-Q1 at the wafer level verify low cost and consistent accuracy: (±3°C at 25°C, ±4°C across –40°C to 125°C). Functional safety documentation is also available for systems requiring enhanced reliability.
filter Andere Analoge Temperatursensoren suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität
LM50 AKTIV Temperatursensor (±2 °C Abweichung) mit Analogausgang und Verstärkungsfaktor von 10 mV/°C Industrial-grade version
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
TMP235-Q1 AKTIV Temperatursensor mit Analogausgang, Automobilzulassung, ±1,5°C 2,3 bis 5,5 V, mit +10 mV/°C Gain Higher accuracy (±1.5°C) with lower power demand (12uA), and wider temperature range (-40C to 150°C). Available in a pin-to-pin SOT-23 or smaller SC70 package.
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
ISOTMP35-Q1 AKTIV Einfach isolierter Temperatursensor für die Automobilindustrie, 1,5 Grad Celsius, mit Analogausgang First-in-market integrated isolation with the same sensor gain (10 mV/°C). Higher accuracy (±1.5°C)
TMP300-Q1 AKTIV Widerstandsprogrammierbarer, bis zu 18-V-fähiger Temperaturschalter und analoger Ausgangssensor, Aut Temperature switch with both analog and comparator outputs with a standard sensor gain (10 mV/°C), and supporting voltage range (1.8 to 18V).

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet LM50-Q1 Automotive (Grade 1), ±3°C Accurate, Analog Centigrade (10mV/°C) Temperature Sensor in SOT-23 Package datasheet PDF | HTML 20 Mai 2025
Functional safety information LM50-Q1 Functional Safety User's Guide 17 Feb 2020
Certificate UL Certificate of Compliance Vol1-Sec5 E232195 06 Aug 2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM50HVEVM — LM50 high-voltage evaluation module

The LM50HV evaluation module (EVM) features a single-pole-double-throw (SPDT) switch that allows users to connect a power supply through test points. The LM50HVEVM uses a MSP430F5528 microcontroller along with a USB interface to enable users to datalog results and interface with the LM50HV analog (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23 (DBZ) 3 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos