Produktdetails

Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion Supply current (max) (µA) 670 Temp resolution (max) (Bits) 11 Remote channels (#) 1 Addresses 3 Rating Catalog
Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion Supply current (max) (µA) 670 Temp resolution (max) (Bits) 11 Remote channels (#) 1 Addresses 3 Rating Catalog
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Remote and Local Temperature Channels
  • Targeted for Intel 45nm Processor Diodes
  • Two Formats: −128°C to +127.875°C and 0°C to 255.875°C
  • Digital Filter for Remote Channel
  • Programmable TCRIT and OS Thresholds
  • Programmable Shared Hysteresis Register
  • Diode Fault Detection
  • Mask, Offset, and Status Registers
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Programmable Conversion Rate for Best Power Consumption
  • Three-Level Address Pin
  • Standby Mode One-Shot Conversion Control
  • Pin-for-Pin Compatible With the LM95235 and LM86, LM89, LM99
  • 8-Pin VSSOP and SOIC Packages

Key Specifications

  • Supply Voltage 3.0 to 3.6 V
  • Supply Current, Conv. Rate = 1 Hz 350 µA (typ)
  • Remote Diode Temperature Accuracy
    • TA = 25°C to 85°C; TD = 50°C to 105°C, ±0.75 °C (max)
    • TA = 25°C to 85°C; TD = 40°C to 125°C, ±1.5 °C (max)
  • Local Temperature Accuracy
    • TA = 25°C to 100°C, ±2.0 °C (max)
  • Conversion Rate, Both Channels 16 to 0.4 Hz

All trademarks are the property of their respective owners.

  • Remote and Local Temperature Channels
  • Targeted for Intel 45nm Processor Diodes
  • Two Formats: −128°C to +127.875°C and 0°C to 255.875°C
  • Digital Filter for Remote Channel
  • Programmable TCRIT and OS Thresholds
  • Programmable Shared Hysteresis Register
  • Diode Fault Detection
  • Mask, Offset, and Status Registers
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Programmable Conversion Rate for Best Power Consumption
  • Three-Level Address Pin
  • Standby Mode One-Shot Conversion Control
  • Pin-for-Pin Compatible With the LM95235 and LM86, LM89, LM99
  • 8-Pin VSSOP and SOIC Packages

Key Specifications

  • Supply Voltage 3.0 to 3.6 V
  • Supply Current, Conv. Rate = 1 Hz 350 µA (typ)
  • Remote Diode Temperature Accuracy
    • TA = 25°C to 85°C; TD = 50°C to 105°C, ±0.75 °C (max)
    • TA = 25°C to 85°C; TD = 40°C to 125°C, ±1.5 °C (max)
  • Local Temperature Accuracy
    • TA = 25°C to 100°C, ±2.0 °C (max)
  • Conversion Rate, Both Channels 16 to 0.4 Hz

All trademarks are the property of their respective owners.

The LM95245 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface and TruTherm technology that can monitor the temperature of a remote diode as well as its own temperature. The LM95245 can be used to very accurately monitor the temperature of external devices such as microprocessors. TruTherm technology allows the LM95245 to precisely monitor thermal diodes found in 90 nm and smaller geometry processes. The LM95245 is specifically targeted for Intel processors on 45nm process. LM95245 reports temperature in two different formats for +127.875°C/-128°C range and 0°C/255°C range. The LM95245 T_CRIT and OS outputs are asserted when either unmasked channel exceeds its programmed limit and can be used to shutdown the system, to turn on the system fans, or as a microcontroller interrupt function. The current status of the T_CRIT and OS pins can be read back from the status registers via the SMBus interface. All limits have a shared programmable hysteresis register.

The remote temperature channel of the LM95245 has a programmable digital filter. The LM95245 is targeted for a typical Intel® processor on a 45 nm, 65 nm or 90nm process, and has an offset register for maximum flexibility and best accuracy.

The LM95245 has a three-level address pin to connect up to 3 devices to the same SMBus master, that is shared with the OS output. The LM95245 has a programmable conversion rate register and a standby mode to save power. One conversion can be triggered in standby mode by writing to the one-shot register.

The LM95245 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface and TruTherm technology that can monitor the temperature of a remote diode as well as its own temperature. The LM95245 can be used to very accurately monitor the temperature of external devices such as microprocessors. TruTherm technology allows the LM95245 to precisely monitor thermal diodes found in 90 nm and smaller geometry processes. The LM95245 is specifically targeted for Intel processors on 45nm process. LM95245 reports temperature in two different formats for +127.875°C/-128°C range and 0°C/255°C range. The LM95245 T_CRIT and OS outputs are asserted when either unmasked channel exceeds its programmed limit and can be used to shutdown the system, to turn on the system fans, or as a microcontroller interrupt function. The current status of the T_CRIT and OS pins can be read back from the status registers via the SMBus interface. All limits have a shared programmable hysteresis register.

The remote temperature channel of the LM95245 has a programmable digital filter. The LM95245 is targeted for a typical Intel® processor on a 45 nm, 65 nm or 90nm process, and has an offset register for maximum flexibility and best accuracy.

The LM95245 has a three-level address pin to connect up to 3 devices to the same SMBus master, that is shared with the OS output. The LM95245 has a programmable conversion rate register and a standby mode to save power. One conversion can be triggered in standby mode by writing to the one-shot register.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet Precision Diode Digital Temp Sensor w/TruTherm BJT Comp Tech for 45nm Process datasheet (Rev. G) 22 Mär 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Treiber oder Bibliothek

LM95245SW-LINUX — Linux-Treiber für LM95245

The Linux driver supports the LM95245 series of Remote and Local Temp Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • (...)
Support-Software

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Digitale Temperatursensoren
LM63 1 Remote- und lokaler Temperatursensor mit Lüftersteuerung LM64 1 Remote- und lokaler Temperatursensor mit Lüftersteuerung und 5 GPIOs LM71 Temperatursensor mit SPI-Schnittstelle (±1,5°C) LM71-Q1 Temperatursensor, Automotive Grade, ±1,5 °C, mit SPI-Schnittstelle LM73 Temperatursensor (±1°C) mit I2C/SMBus-Schnittstelle LM75A Industriestandard-Temperatursensor, 2 C, I2C/SMBus-Schnittstelle LM86 Remote und lokaler Temperatursensor mit ±0,75 C Abweichung mit SMBus-Schnittstelle LM89 Remote und lokaler Temperatursensor mit ±0,75 C Abweichung mit SMBus-Schnittstelle und 2 Adressen fü LM90 Remote und lokaler Temperatursensor mit SMBus-Schnittstelle LM93 2 Remote-Temperatursensoren, 1 lokaler Temperatursensor mit Hardwareüberwacher und 16 Stromversorgun LM95010 Temperatursensor (±2°C Abweichung) mit SensorPath-Schnittstelle LM95071 Temperatursensor mit SPI-Schnittstelle (±1°C) LM95172-Q1 Temperatursensor, Automotive Grade, ±1°C, mit Temperaturbereich bis 200 °C und SPI-Schnittstelle LM95214 Vierfacher remote und lokaler Temperatursensor (±2°C Abweichung) mit SMBus-Schnittstelle LM95221 Dual-Temperatursensor, ±3 °C, remote und lokal mit Beta-Kompensation und Schnittstelle SMB LM95231 Zweifacher Remote- und lokaler Temperatursensor mit TruTherm-Technologie und SMBus-Schnittstelle LM95233 Zweifacher remote und lokaler Temperatursensor mit ±2 C Abweichung mit TruTherm-Technologie und SMBu LM95234 Vierfacher remote und lokaler Temperatursensor (±2°C Abweichung) mit TruTherm-Technologie Und SMBus- LM95235 ±0,75°C Remote- und lokaler Temperatursensor mit SMBus, Beta-Kompensation für 65/90-nm LM95235-Q1 Remote und lokaler Temperatursensor, Automotive Grade, ±2 °C, mit TruTherm-Technologie und SMBus LM95241 ±1,25°C, Dual-Remote- & lokaler Temperatursensor mit Beta-Kompensation und SMBus, LM95245 Remote- und lokaler Temperatursensor mit SMBus, Beta-Kompensation für 45-nm-Dioden, ±0,75  LM96000 Hardware-Überwachung mit Lüftersteuerung und 6-Volt-Versorgungsspannungsüberwachung LM96080 1 lokaler Temperatursensor mit Lüftergeschwindigkeit und Stromversorgung Spannungsüberwachung LM96163 1 Remote- und lokaler Temperatursensor mit Beta-Kompensation und Lüftersteuerung LM99 Remote- und lokaler Temperatursensor mit TruTherm-Technologie und SMBus-Schnittstelle
Präzisions-ADCs
ADC128D818 Delta-Sigma-ADC mit 12 Bit, 82 SPS, 8 Kanälen, Temperatursensor, INT/EXT-Spannungsreferenz und I2C-S
Simulationsmodell

LM95245 IBIS MODEL

SNIM006.ZIP (25 KB) - IBIS Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos