Produktdetails

Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 12, 16, 20, 24, 36, 40, 44, 50, 72, 100 Power supply voltage - dual (V) +/- 25, +/-10, +/-12, +/-15, +/-18, +/-20, +/-22, +/-36, +/-50 Protocols Analog Ron (typ) (Ω) 14 CON (typ) (pF) 15 ON-state leakage current (max) (µA) 0.008 Supply current (typ) (µA) 65 Bandwidth (MHz) 480 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -50
Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 12, 16, 20, 24, 36, 40, 44, 50, 72, 100 Power supply voltage - dual (V) +/- 25, +/-10, +/-12, +/-15, +/-18, +/-20, +/-22, +/-36, +/-50 Protocols Analog Ron (typ) (Ω) 14 CON (typ) (pF) 15 ON-state leakage current (max) (µA) 0.008 Supply current (typ) (µA) 65 Bandwidth (MHz) 480 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -50
WQFN (RUM) 16 16 mm² 4 x 4
  • High supply voltage capable:
    • Dual supply: ±10V to ±50V
    • Single supply: 10V to 100V
    • Asymmetric dual supply operation: including +10V / –90V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 150mA
  • Low input leakage: 110pA at 50°C
  • Low charge injection: –13pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.4Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 7pF
  • Removes need for additional logic rail (VL)
  • 1.8V Logic capable
  • Fail-safe logic: up to 48V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard small WQFN package
  • High supply voltage capable:
    • Dual supply: ±10V to ±50V
    • Single supply: 10V to 100V
    • Asymmetric dual supply operation: including +10V / –90V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 150mA
  • Low input leakage: 110pA at 50°C
  • Low charge injection: –13pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.4Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 7pF
  • Removes need for additional logic rail (VL)
  • 1.8V Logic capable
  • Fail-safe logic: up to 48V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard small WQFN package

The TMUX861x is a modern high voltage capable analog switches with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100V. The TMUX861x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX861x family supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

The TMUX861x is a modern high voltage capable analog switches with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100V. The TMUX861x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX861x family supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TMUX861x 100V, Flat Ron, 1:1 (SPST), 4-Channel Switches with Latch-Up Immunity and 1.8V Logic datasheet (Rev. A) PDF | HTML 21 Apr 2025
Application note Key Voltage Considerations for Replacing a Photorelay With an Analog Switch PDF | HTML 10 Mär 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TMUXRUM-RRPEVM — Generisches TMUX-Evaluierungsmodul für 16-polige RUM- und RRP-Quad-Flatpack-No-Lead-(QFN)-Gehäuse

Das TMUXRUM-RRPEVM ermöglicht schnelles Prototyping und die DC-Charakterisierung der TMUX-Produktlinie von TI in 16-poligen RUM- oder RRP-Gehäusen (QFN) und ist für den Hochspannungsbetrieb ausgelegt.

Benutzerhandbuch: PDF | HTML
Simulationsmodell

TMUX8612 IBIS Model

SCDM333.ZIP (39 KB) - IBIS Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RUM) 16 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos