Produktdetails

Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 110 Power supply voltage - dual (V) +/-10, +/-110, +/-50 Protocols Analog Ron (typ) (Ω) 14 ON-state leakage current (max) (µA) 0.003 Supply current (typ) (µA) 100 Operating temperature range (°C) to Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -110
Configuration 1:1 SPST Number of channels 4 Power supply voltage - single (V) 110 Power supply voltage - dual (V) +/-10, +/-110, +/-50 Protocols Analog Ron (typ) (Ω) 14 ON-state leakage current (max) (µA) 0.003 Supply current (typ) (µA) 100 Operating temperature range (°C) to Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Rating Catalog Negative rail supply voltage (max) (V) -110
WQFN (RUM) 16 16 mm² 4 x 4
  • High supply voltage capable:
    • Dual supply: ±10V to ±110V
    • Single supply: 10V to 140V
    • Asymmetric dual supply operation: between +90V / –130V and 140V / -80V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 200mA
  • Low input leakage: 80pA at 25°C
  • Low charge injection: –20pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.435Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 5pF
  • Removes need for additional logic rail (VL)
  • 1.8-V Logic capable
  • Fail-safe logic: up to 48 V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard, small WQFN package
  • High supply voltage capable:
    • Dual supply: ±10V to ±110V
    • Single supply: 10V to 140V
    • Asymmetric dual supply operation: between +90V / –130V and 140V / -80V
  • Consistent parametric across supply voltages
  • Latch-up immune
  • High continuous current: 200mA
  • Low input leakage: 80pA at 25°C
  • Low charge injection: –20pC
  • Low off isolation & crosstalk: < –100dB
  • Low On-Resistance flatness: 0.435Ω
  • Low On-Resistance: 14Ω
  • Low off-capacitance: 5pF
  • Removes need for additional logic rail (VL)
  • 1.8-V Logic capable
  • Fail-safe logic: up to 48 V independent of supply
  • Integrated Pull-Down resistor on logic pins
  • Bidirectional signal path
  • Wide operating temperature TA: –40°C to 125°C
  • Industry-standard, small WQFN package

The TMUX9612 is a modern high voltage capable analog switch with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The device works well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 220V. The TMUX9612 device provides consistent analog parametric performance across the entire supply voltage range. The device also supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

The TMUX9612 is a modern high voltage capable analog switch with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The device works well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 220V. The TMUX9612 device provides consistent analog parametric performance across the entire supply voltage range. The device also supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8V, 3.3V, and 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TMUX9612 220V, Flat Ron, 1:1 (SPST), 4-Channel Switches with Latch-Up Immunity and 1.8V Logic datasheet PDF | HTML 14 Jul 2025
Application note Key Voltage Considerations for Replacing a Photorelay With an Analog Switch PDF | HTML 10 Mär 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TMUXRUM-RRPEVM — Generisches TMUX-Evaluierungsmodul für 16-polige RUM- und RRP-Quad-Flatpack-No-Lead-(QFN)-Gehäuse

Das TMUXRUM-RRPEVM ermöglicht schnelles Prototyping und die DC-Charakterisierung der TMUX-Produktlinie von TI in 16-poligen RUM- oder RRP-Gehäusen (QFN) und ist für den Hochspannungsbetrieb ausgelegt.

Benutzerhandbuch: PDF | HTML
Simulationsmodell

TMUX9612 IBIS Model

SCDM334.ZIP (38 KB) - IBIS Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RUM) 16 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos