Inicio Conectividad inalámbrica Productos inferiores a 1 GHz de largo alcance MCU inalámbricas Sub-1 GHz
Inicio
Conectividad inalámbrica
Productos inferiores a 1 GHz de largo alcance
MCU inalámbricas Sub-1 GHz

CC1354R10

ACTIVO

MCU inalám. multibanda SimpleLink™ Arm® Cortex®-M33, comp. con EdgeAI, 1 MB mem. flash y 296 kB SRAM

Haga su pedido ahora
Hoja de datos
Guías de usuario
Errata

CC1354R10

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Protocols 6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Thread, Wi-SUN, Wireless M-Bus, Zigbee Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 2360-2500, 287-351, 359-439, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 14 RAM (kByte) 296 Flash memory (kByte) 1024 CPU Arm® Cortex®-M33 Operating system FreeRTOS, RTOS, TI-RTOS Peripherals 12-bit ADC 8-channel, 2 comparators, 4 SPI, 4 UART, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Number of GPIOs 28, 42 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled Yes
Protocols 6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Thread, Wi-SUN, Wireless M-Bus, Zigbee Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 2360-2500, 287-351, 359-439, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 14 RAM (kByte) 296 Flash memory (kByte) 1024 CPU Arm® Cortex®-M33 Operating system FreeRTOS, RTOS, TI-RTOS Peripherals 12-bit ADC 8-channel, 2 comparators, 4 SPI, 4 UART, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Number of GPIOs 28, 42 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled Yes
VQFN (RGZ) 48 49 mm² 7 x 7 VQFN (RSK) 64 64 mm² 8 x 8

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024kB flash program memory
  • 8kB of cache SRAM
  • 256kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32kB of additional SRAM if parity is disabled
  • Dual-band Sub-1GHz and 2.4GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2- (G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY, and MAC
  • Supports over-the-air update (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4mA active mode, CoreMark
    • 71µA/MHz running CoreMark
    • 0.98µA standby mode, RTC, 256kB SRAM
    • 0.17µA shutdown mode, wake-up on pin
  • Ultra-low-power sensor controller consumption
    • 32µA in 2MHz mode
    • 849µA in 24MHz mode
  • Radio consumption:
    • 5.8mA RX at 868MHz
    • 6.9mA RX at 2.4GHz
    • 25.8mA TX at +14dBm at 868MHz
    • 7.1mA TX at 0dBm at 2.4GHz

Wireless protocol support

High-performance radio

  • -­121dBm for 2.5kbps long-range mode
  • -­110dBm at 50kbps, 802.15.4, 868MHz
  • -104dBm for Bluetooth® Low Energy 125kbps
  • -105dBm for IEEE 802.15.4-2006 2.4GHz OQPSK (coherent modem)

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66, STD-T67, and STD-T108

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for a trusted execution environment
  • AES 128-bit and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40°C to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (28 GPIOs)
  • 8mm × 8mm RSK VQFN64 (42 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024kB flash program memory
  • 8kB of cache SRAM
  • 256kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32kB of additional SRAM if parity is disabled
  • Dual-band Sub-1GHz and 2.4GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2- (G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY, and MAC
  • Supports over-the-air update (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4mA active mode, CoreMark
    • 71µA/MHz running CoreMark
    • 0.98µA standby mode, RTC, 256kB SRAM
    • 0.17µA shutdown mode, wake-up on pin
  • Ultra-low-power sensor controller consumption
    • 32µA in 2MHz mode
    • 849µA in 24MHz mode
  • Radio consumption:
    • 5.8mA RX at 868MHz
    • 6.9mA RX at 2.4GHz
    • 25.8mA TX at +14dBm at 868MHz
    • 7.1mA TX at 0dBm at 2.4GHz

Wireless protocol support

High-performance radio

  • -­121dBm for 2.5kbps long-range mode
  • -­110dBm at 50kbps, 802.15.4, 868MHz
  • -104dBm for Bluetooth® Low Energy 125kbps
  • -105dBm for IEEE 802.15.4-2006 2.4GHz OQPSK (coherent modem)

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66, STD-T67, and STD-T108

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for a trusted execution environment
  • AES 128-bit and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40°C to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (28 GPIOs)
  • 8mm × 8mm RSK VQFN64 (42 GPIOs)
  • RoHS-compliant package

The SimpleLink™CC1354R10 device is a multiprotocol and multiband Sub-1GHz and 2.4GHz wireless microcontroller (MCU) supporting Thread, Zigbee, Bluetooth 5.3 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, Wi-SUN, Amazon Sidewalk, proprietary systems, including the TI 15.4-Stack (Sub-1GHz and 2.4GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communications, with advanced security features and on-chip over-the-air (OAD) update capability. It enables long range and reliable communication in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Arm TrustZone based secure key storage, device ID and trusted functions support.
  • Multiband device supporting concurrent multiprotocol for both Sub-1GHz and 2.4GHz through a DMM driver.
  • Wide flexibility of protocol stack support in the SimpleLink LOWPOWER F2 Software Development Kit (SDK).
  • Longer battery life wireless applications with low standby current of 0.98µA and full SRAM retention.
  • Industrial temperature ready with lowest standby current of 5µA at 85⁰C.
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1Hz ADC sampling at 1µA system current.
  • Low Soft Error Rate (SER) Failure-in-Time (FIT) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software controlled radio controller (Arm Cortex-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity (–121dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1354R10 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more details, see the SimpleLink MCU platform.

In addition to the software compatibility, within the multiband wireless MCUs, there is pin-to-pin compatibility from 352kB of flash up to 1MB of flash in the 7mm × 7mm QFN package for maximum design scalability. For more information on TI’s Sub-1GHz devices, see www.ti.com/sub1ghz.

The SimpleLink™CC1354R10 device is a multiprotocol and multiband Sub-1GHz and 2.4GHz wireless microcontroller (MCU) supporting Thread, Zigbee, Bluetooth 5.3 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, Wi-SUN, Amazon Sidewalk, proprietary systems, including the TI 15.4-Stack (Sub-1GHz and 2.4GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communications, with advanced security features and on-chip over-the-air (OAD) update capability. It enables long range and reliable communication in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Arm TrustZone based secure key storage, device ID and trusted functions support.
  • Multiband device supporting concurrent multiprotocol for both Sub-1GHz and 2.4GHz through a DMM driver.
  • Wide flexibility of protocol stack support in the SimpleLink LOWPOWER F2 Software Development Kit (SDK).
  • Longer battery life wireless applications with low standby current of 0.98µA and full SRAM retention.
  • Industrial temperature ready with lowest standby current of 5µA at 85⁰C.
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1Hz ADC sampling at 1µA system current.
  • Low Soft Error Rate (SER) Failure-in-Time (FIT) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software controlled radio controller (Arm Cortex-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity (–121dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1354R10 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more details, see the SimpleLink MCU platform.

In addition to the software compatibility, within the multiband wireless MCUs, there is pin-to-pin compatibility from 352kB of flash up to 1MB of flash in the 7mm × 7mm QFN package for maximum design scalability. For more information on TI’s Sub-1GHz devices, see www.ti.com/sub1ghz.
filter Buscar otro/a MCU inalámbricas Sub-1 GHz
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 41
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet CC1354R10 SimpleLink™ High-Performance Multiband Wireless MCU datasheet (Rev. B) PDF | HTML 24 abr 2024
* Errata CC1354R10 SimpleLink Wireless MCU Device Revision B (Rev. B) PDF | HTML 13 jun 2024
* User guide CC13x4, CC26x4 SimpleLink™ Wireless MCU Technical Reference Manual PDF | HTML 23 mar 2023
Application note TI Wi-SUN® Network Performance PDF | HTML 01 ago 2025
Application note CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 06 ago 2024
Application note CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. H) PDF | HTML 02 may 2024
User guide SimpleLink CC131x and CC135x Family Hardware Migration Guide PDF | HTML 02 may 2024
Application brief Wireless Technologies for Solar Micro Inverters and Trackers (Rev. A) PDF | HTML 09 abr 2024
Application brief Wireless MCUs Designed to Meet Complex IoT Requirements PDF | HTML 12 jul 2023
Application note Antenna Impedance Measurement and Matching PDF | HTML 22 mar 2022
Application note Configuring Bluetooth LE devices for Direct Test Mode PDF | HTML 25 feb 2022
Application note 433 to 930-MHz and 2.4-GHz BOM Tunable PCB Antenna PDF | HTML 07 feb 2022
Application note Connect One TI 15.4 Stack Sensor to Multiple Gateways PDF | HTML 20 dic 2021
Application note TI Bluetooth® Mesh Software Product Brief PDF | HTML 17 dic 2021
Technical article 4 questions to ask before choosing a Wi-SUN stack PDF | HTML 13 ago 2021
White paper Dynamic Multi-Protocol (DMM) Performance 21 abr 2021
White paper Exploring Thread and Zigbee for home and building automation PDF | HTML 12 abr 2021
Technical article How Wi-SUN® FAN improves connected infrastructures PDF | HTML 19 nov 2020
Technical article How TI helps expand connectivity beyond the front door with Amazon Sidewalk PDF | HTML 21 sep 2020
Application note Finding Settings for New Phy’s for the CC13x0 and CC13x2 Family PDF | HTML 14 sep 2020
Cybersecurity advisory Bluetooth Low Energy, Basic Rate/Enhanced Data Rate – Method Confusion Pairing V PDF | HTML 18 may 2020
Application note Cloning Z-Stack Network Properties Using the SimpleLink Wireless MCU Family PDF | HTML 31 mar 2020
Application note Cryptographic Performance and Energy Efficiency on SimpleLink CC13x2/CC26x2 MCUs PDF | HTML 28 ene 2020
Technical article Designing a building security system with the Sub-1 GHz Linux Gateway Software Dev PDF | HTML 25 sep 2019
More literature Understanding security features for SimpleLink™ Sub-1 GHz CC13x2 MCUs 17 jun 2019
More literature Understanding security features for SimpleLink™ Zigbee CC13x2 and CC26x2 Wireles 17 jun 2019
Application note Bluetooth® Low Energy Tree Structure Network PDF | HTML 29 may 2019
Application note Secure Boot in SimpleLink™ CC13x2/CC26x2 Wireless MCUs 15 abr 2019
Technical article The “key” to security: Zigbee 3.0’s security features PDF | HTML 05 feb 2019
Product overview Out-of-box star-network solution: TI 15.4-Stack 14 ene 2019
Application note RF PCB Simulation Cookbook 09 ene 2019
Product overview Time Multiplexing: Concurrent Multi-standard Operation 03 ene 2019
White paper Migrating your proprietary solution to the SimpleLink™ WMCU 07 nov 2018
Product overview Electronic Smart Locks: Ultra-low power and Multi-Standard operation 05 nov 2018
Technical article Unlock every door with the SimpleLink™ platform PDF | HTML 19 sep 2018
Application note Low-Power ADC Solution for CC13x2 and CC26x2 02 mar 2018
White paper Thread and Zigbee for home and building automation 01 mar 2018
Application brief Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUs 27 feb 2018
Application note Use of Low-power Zigbee® and Thread With the SimpleLink™ Wireless MCU Family 27 feb 2018
Application note Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller 05 mar 2017
Application note TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 28 feb 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Sonda de depuración

LB-3P-TRACE32-WIRELESS — Sistema de depuración Lauterbach TRACE32 para conectividad inalámbrica

Lauterbach‘s TRACE32® tools are a suite of leading-edge hardware and software components that enables developers to analyze, optimize and certify many of TI's Wireless Connectivity chips. The globally renowned debug solutions for embedded systems are the perfect solution for all development phases (...)

Desde: Lauterbach GmbH
View Options
Kit de desarrollo

LP-EM-CC1354P10 — Kit de desarrollo CC1354P10 LaunchPad™ para microcontrolador inalámbrico SimpleLink™ inferior a 1 GH

Este kit de desarrollo LaunchPad™ acelera el desarrollo en dispositivos con amplificador de potencia integrado y soporte de radio multibanda para operaciones simultáneas inferiores a 1 GHz y de 2.4 GHz. Entre los protocolos compatibles se incluyen Bluetooth® baja energía, Wi-SUN®, Thread, Zigbee®, (...)

View Options
Kit de desarrollo

LP-XDS110 — Depurador del kit de desarrollo LaunchPad™ XDS110

El depurador del kit de desarrollo LaunchPad LP-XDS110 es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110 está diseñado para conectarse directamente a Launchpads divididos a través del (...)

No disponible en TI.com
Kit de desarrollo

LP-XDS110ET — Kit de desarrollo XDS110ET LaunchPad™ depurador con software EnergyTrace™

El depurador del kit de desarrollo LaunchPad LP-XDS110ET es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110ET puede conectarse directamente a kits de desarrollo Split Launchpad a través del (...)

No disponible en TI.com
Kit de desarrollo de software (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)

Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

Productos y hardware compatibles

Productos y hardware compatibles
Opciones de descarga
Software de aplicación y estructura

MIOTY — Software de protocolo para la tecnología MIOTY

Para comenzar a evaluar el software de protocolo MIOTY® con el kit LaunchPad SensorTag:
  1. compre uno o más kits SensorTag CC1352R
  2. compre un kit de desarrollo LaunchPad CC1352R1
  3. descargue el kit de desarrollo de software SimpleLink™
  4. Para el desarrollo de pilas MIOTY, póngase en contacto con Stackforce
  5. (...)
Descargar
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles

Productos y hardware compatibles
Empiece
IDE, configuración, compilador o depurador

ARM-CGT — Herramientas de generación de código Arm®: compilador

Las herramientas de generación de código (compilador) TI Arm® son compatibles con el desarrollo de aplicaciones para plataformas basadas en TI Arm, en especial aquellas con los dispositivos de las series Cortex-M y Cortex-R de TI Arm.

Las herramientas actuales ARM-CGT-CLANG se derivan del (...)

Guía del usuario: PDF | HTML
View Options
IDE, configuración, compilador o depurador

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
View Options
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Capacitación en línea

SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
Productos y hardware compatibles

Productos y hardware compatibles
Examinar
Enchufe

SIMPLELINK-SDK-LVGL-PLUGIN — Complemento LittlevGL del kit de desarrollo de software (SDK) SimpleLink™

El complemento SimpleLink™ SDK LVGL es un paquete de software complementario que permite capacidades gráficas avanzadas en varias plataformas MCU SimpleLink™ mediante la integración de la biblioteca gratuita y de código abierto de terceros, LittlevGL, en el ecosistema SimpleLink SDK. El complemento (...)
View Options
Herramienta de programación de software

FLASH-PROGRAMMER — SmartRF Flash Programmer

SmartRF Flash Programmer 2 se puede utilizar para programar la memoria flash en MCU inalámbricas RF de bajo consumo basadas en ARM de Texas Instruments a través de las interfaces serie y de depuración. Consulte la lista de productos compatibles para verificar la compatibilidad. Uniflash también se (...)
Guía del usuario: PDF
View Options
Herramienta de programación de software

UNIFLASH — Herramienta de programación flash UniFlash

UniFlash es una herramienta de software para programar la memoria flash integrada de los microcontroladores y dispositivos de comunicación inalámbrica de TI, así como la memoria flash integrada de los procesadores de TI. UniFlash ofrece interfaces gráficas y de línea de comandos.

UniFlash se puede (...)

View Options
Herramienta de cálculo

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Productos y hardware compatibles

Productos y hardware compatibles
Opciones de descarga
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGZ) 48 Ultra Librarian
VQFN (RSK) 64 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos