Inicio Administración de potencia Reguladores lineales y de baja salida (LDO)

LM317L

ACTIVO

Regulador de tensión lineal ajustable de 100 mA y 35 V

Detalles del producto

Rating Catalog Vin (max) (V) 35 Vin (min) (V) 3.75 Iout (max) (A) 0.1 Output options Adjustable Output Vout (max) (V) 32 Vout (min) (V) 1.2 Noise (µVrms) 30 PSRR at 100 KHz (dB) 38 Iq (typ) (mA) 1.5 Thermal resistance θJA (°C/W) 52 Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 35 Vin (min) (V) 3.75 Iout (max) (A) 0.1 Output options Adjustable Output Vout (max) (V) 32 Vout (min) (V) 1.2 Noise (µVrms) 30 PSRR at 100 KHz (dB) 38 Iq (typ) (mA) 1.5 Thermal resistance θJA (°C/W) 52 Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) -40 to 125
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-89 (PK) 3 18.4275 mm² 4.5 x 4.095 TO-92 (LP) 3 19.136 mm² 5.2 x 3.68 TSSOP (PW) 8 19.2 mm² 3 x 6.4
  • Output voltage range (VO):
    • Adjustable 1.25V to 37V (for new chip)
    • Adjustable 1.25V to 32V (for legacy chip)
  • Output current: Up to 100mA
  • Accuracy:
    • Input regulation typically 0.01% per input voltage change
    • Output regulation typically 0.5%
  • Ripple rejection typically:
    • 80 dB at 120Hz
    • 65 dB at 100kHz
  • For higher output current requirements, see LM317M (500mA) and LM317 (1.5A)
  • Output voltage range (VO):
    • Adjustable 1.25V to 37V (for new chip)
    • Adjustable 1.25V to 32V (for legacy chip)
  • Output current: Up to 100mA
  • Accuracy:
    • Input regulation typically 0.01% per input voltage change
    • Output regulation typically 0.5%
  • Ripple rejection typically:
    • 80 dB at 120Hz
    • 65 dB at 100kHz
  • For higher output current requirements, see LM317M (500mA) and LM317 (1.5A)

The LM317L is an adjustable, 3-terminal, positive-voltage regulator capable of supplying up to 100 mA over an output-voltage range of 1.25V to 37V. The device is exceptionally easy to use and requires only two external resistors to set the output voltage.

For the legacy chip, the LM317LC series is characterized for the junction temperature range of 0°C to +125°C and the LM317LI device is characterized for the operating junction temperature range of –40°C to +125°C. For the new chip, the both LM317LC and LM317LI series are characterized for the junction temperature range of –40°C to +125°C.

The LM317L is an adjustable, 3-terminal, positive-voltage regulator capable of supplying up to 100 mA over an output-voltage range of 1.25V to 37V. The device is exceptionally easy to use and requires only two external resistors to set the output voltage.

For the legacy chip, the LM317LC series is characterized for the junction temperature range of 0°C to +125°C and the LM317LI device is characterized for the operating junction temperature range of –40°C to +125°C. For the new chip, the both LM317LC and LM317LI series are characterized for the junction temperature range of –40°C to +125°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 20
Tipo Título Fecha
* Data sheet LM317L 100mA Adjustable Floating Voltage Regulator datasheet (Rev. F) PDF | HTML 19 dic 2024
Application note Cost-Optimized, High-Performance Front-End Design for Analog Input Modules PDF | HTML 22 jun 2022
Application note LDO Noise Demystified (Rev. B) PDF | HTML 18 ago 2020
Application note A Topical Index of TI LDO Application Notes (Rev. F) 27 jun 2019
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 09 ago 2017
Application note AB-12 Wide Adjustable Range PNP Voltage Regulator (Rev. B) 06 may 2013
Application note AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) 06 may 2013
Application note AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) 06 may 2013
Application note AN-42 IC Provides On-Card Regulation for Logic Circuits (Rev. B) 06 may 2013
Application note AN-178 Applications for an Adjustable IC Power Regulator (Rev. B) 05 may 2013
Application note AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B) 05 may 2013
Application note Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) 05 may 2013
Application note AN-1061 Power Conversion in Line-Powered Equipment (Rev. B) 23 abr 2013
Application note High-Efficiency Reg has Low Drop-Out Voltage (Rev. B) 23 abr 2013
Application note Packaging Limits Range of Linear Regulators 08 may 2010
Application note Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) 04 jun 2008
Application note A New Production Technique for Trimming Voltage Regulators 03 oct 2002
Application note Adjustable 3-Terminal Regulator for Low-Cost Battery Charging Systems 03 oct 2002
Application note High Stability Regulators 03 oct 2002
Application note Understanding the Terms and Definitions of LDO Voltage Regulators 21 oct 1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

LM317L PSpice Transient Model

SNVMAW4.ZIP (65 KB) - PSpice Model
Modelo de simulación

LM317L Unencrypted PSpice Transient Model

SNVMAW3.ZIP (2 KB) - PSpice Model
Diseños de referencia

PMP15043 — Diseño de referencia de fuente de alimentación de 6A y 0,05 % de precisión de corriente para sistema

Este circuito de diseño de referencia presenta una solución de alimentación de corriente bidireccional de alta precisión que se utiliza en sistemas de prueba de baterías (BTS). La capacidad de corriente máxima es de 6 A con una exactitud de escala completa inferior al 0.05 %. El circuito, que se (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00210 — Diseño de referencia de etapa de potencia de puente completo con protección de 75 V/10 A para los co

Los accionamientos para motores paso a paso se utilizan en muchas aplicaciones que funcionan normalmente desde 12 VCC a 48 VCC. TI ofrece una amplia gama de soluciones para controladores del motor de velocidad gradual, con interfaces de control paralelas y estándar de la industria de (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00365 — Diseño de referencia de etapa de potencia de puente completo con protección de 75 V/10 A para los co

Los accionamientos de corriente continua con escobillas de baja tensión se utilizan en muchas aplicaciones. TI ofrece una amplia familia de soluciones de conductores de motor de CC con escobillas con opciones flexibles de interfaz de control para uno o más motores de CC con escobillas de hasta (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP8955 — Cargador de Flyback cuasirresonante de tensión constante-corriente constante (CVCC) de salida progra

This industrial charger reference design uses the LM5023 Quasi-Resonant Flyback controller to implement a 120VAC input design with CVCC output configured by microcontroller PWM control from 10 to 22.5V and output current from 200mA to 2A.
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP7246 — Diseño de referencia de convertidor de potencia de 350 W con entrada de 36 V a 60 V, modulación de d

This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
SOT-89 (PK) 3 Ultra Librarian
TO-92 (LP) 3 Ultra Librarian
TSSOP (PW) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos