Inicio Interfaz CIRCUITOS INTEGRADOS (IC) DE I2C, I3C Y SPI E/S de uso general (GPIO) I2C y SPI
Inicio
Interfaz
CIRCUITOS INTEGRADOS (IC) DE I2C, I3C Y SPI
E/S de uso general (GPIO) I2C y SPI

TCA6424A

ACTIVO

Expansor de E/S I2C/SMBus de 1.65 V a 5.5 V de traducción de 24 bits con registros de interrupción,

Haga su pedido ahora
Hoja de datos

TCA6424A

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of I/Os 24 Features Adjustable I/O level, Configuration registers, Interrupt pin, Reset pin Addresses 2 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
Number of I/Os 24 Features Adjustable I/O level, Configuration registers, Interrupt pin, Reset pin Addresses 2 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
UQFN (RGJ) 32 25 mm² (5 mm × 5 mm)
  • Operating power-supply voltage range of 1.65 V to 5.5 V
  • Allows bidirectional voltage-level translation and GPIO expansion between:
    • 1.8-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 2.5-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 3.3-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 5-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
  • I2C to Parallel port expander
  • Low standby current consumption of 1 µA
  • Schmitt-Trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
    • Vhys = 0.18 V Typ at 1.8 V
    • Vhys = 0.25 V Typ at 2.5 V
    • Vhys = 0.33 V Typ at 3.3 V
    • Vhys = 0.5 V Typ at 5 V
  • 5-V Tolerant I/O ports
  • Active-low reset input ( RESET)
  • Open-drain active-low interrupt output ( INT)
  • 400-kHz Fast I2C Bus
  • Input/output configuration register
  • Polarity inversion register
  • Internal power-on reset
  • Power up with all channels configured as inputs
  • No glitch on power up
  • Noise filter on SCL/SDA inputs
  • Latched outputs with high-current drive maximum capability for directly driving LEDs
  • Latch-up performance exceeds 100 mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000-V Human-body model (A114-A)
    • 200-V Machine model (A115-A)
    • 1000-V Charged-device model (C101)
  • Operating power-supply voltage range of 1.65 V to 5.5 V
  • Allows bidirectional voltage-level translation and GPIO expansion between:
    • 1.8-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 2.5-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 3.3-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
    • 5-V SCL/SDA and 1.8-V, 2.5-V, 3.3-V, or 5-V P Port
  • I2C to Parallel port expander
  • Low standby current consumption of 1 µA
  • Schmitt-Trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
    • Vhys = 0.18 V Typ at 1.8 V
    • Vhys = 0.25 V Typ at 2.5 V
    • Vhys = 0.33 V Typ at 3.3 V
    • Vhys = 0.5 V Typ at 5 V
  • 5-V Tolerant I/O ports
  • Active-low reset input ( RESET)
  • Open-drain active-low interrupt output ( INT)
  • 400-kHz Fast I2C Bus
  • Input/output configuration register
  • Polarity inversion register
  • Internal power-on reset
  • Power up with all channels configured as inputs
  • No glitch on power up
  • Noise filter on SCL/SDA inputs
  • Latched outputs with high-current drive maximum capability for directly driving LEDs
  • Latch-up performance exceeds 100 mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000-V Human-body model (A114-A)
    • 200-V Machine model (A115-A)
    • 1000-V Charged-device model (C101)

The bidirectional voltage level translation in the TCA6424A is provided through VCCI. VCCI should be connected to the VCC of the external SCL/SDA lines. This indicates the VCC level of the I2C bus to the TCA6424A. The voltage level on the P-port of the TCA6424A is determined by the VCCP.

The TCA6424A consists of three 8-bit Configuration (input or output selection), Input, Output, and Polarity Inversion (active high) registers. At power on, the I/Os are configured as inputs. However, the system controller can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system controller.

The system controller can reset the TCA6424A in the event of a timeout or other improper operation by asserting a low in the RESET input. The power-on reset puts the registers in their default state and initializes the I2C/SMBus state machine. The RESET pin causes the same reset/initialization to occur without depowering the part.

The TCA6424A open-drain interrupt ( INT) output is activated when any input state differs from its corresponding Input Port register state and is used to indicate to the system controller that an input state has changed.

INT can be connected to the interrupt input of a microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C bus. Thus, the TCA6424A can remain a simple target device.

The device P-port outputs have high-current sink capabilities for directly driving LEDs while consuming low device current.

One hardware pin (ADDR) can be used to program and vary the fixed I2C address and allow up to two devices to share the same I2C bus or SMBus.

The bidirectional voltage level translation in the TCA6424A is provided through VCCI. VCCI should be connected to the VCC of the external SCL/SDA lines. This indicates the VCC level of the I2C bus to the TCA6424A. The voltage level on the P-port of the TCA6424A is determined by the VCCP.

The TCA6424A consists of three 8-bit Configuration (input or output selection), Input, Output, and Polarity Inversion (active high) registers. At power on, the I/Os are configured as inputs. However, the system controller can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system controller.

The system controller can reset the TCA6424A in the event of a timeout or other improper operation by asserting a low in the RESET input. The power-on reset puts the registers in their default state and initializes the I2C/SMBus state machine. The RESET pin causes the same reset/initialization to occur without depowering the part.

The TCA6424A open-drain interrupt ( INT) output is activated when any input state differs from its corresponding Input Port register state and is used to indicate to the system controller that an input state has changed.

INT can be connected to the interrupt input of a microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C bus. Thus, the TCA6424A can remain a simple target device.

The device P-port outputs have high-current sink capabilities for directly driving LEDs while consuming low device current.

One hardware pin (ADDR) can be used to program and vary the fixed I2C address and allow up to two devices to share the same I2C bus or SMBus.
filter Buscar otro/a E/S de uso general (GPIO) I2C y SPI
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TCA6424A Low-Voltage 24-Bit I2C and SMBus I/O Expander With Interrupt Output, Reset, and Configuration Registers datasheet (Rev. D) PDF | HTML 30/01/2023
Nota sobre la aplicación I2C: What is the Auto Increment Feature? PDF | HTML 5/07/2024
Nota sobre la aplicación Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 3/07/2024
Nota sobre la aplicación I2C Dynamic Addressing 25/04/2019
Nota sobre la aplicación Choosing the Correct I2C Device for New Designs PDF | HTML 7/09/2016
Guía de selección I2C Infographic Flyer 3/12/2015
Nota sobre la aplicación Understanding the I2C Bus PDF | HTML 30/06/2015
Nota sobre la aplicación I2C Bus Pull-Up Resistor Calculation PDF | HTML 13/02/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BOOSTXL-IOLINKM-8 — BoosterPack™ maestro IO-Link de 8 puertos

Este BoosterPack™se diseñó para funcionar con el kit LP-AM243 TI LaunchPad™ con el microcontrolador Sitara™ AM243x. En conjunto, este diseño implementa un dispositivo maestro IO-Link de 8 puertos con temporización rápida y determinista y configuración independiente de ciclos y velocidad de bits. (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

IO-EXPANDER-EVM — IO-EXPANDER-EVM: Módulo de evaluación de expansión de E/S I2C y SMBus

El módulo de evaluación (EVM) de expansión de E/S le permite evaluar la cartera de dispositivos de la línea de expansión de E/S SMBus y I2C de TI . Tanto el TCA6424A como el TCA9539 ‌están instalados en la placa. El formato TSSOP de 24 pines también admite TCA6408A, TCA6416A, TCA9534, TCA9534A,  (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Firmware

SLVC564 — I/O Expander Software and Firmware Package

Productos y hardware compatibles
Modelo de simulación

TCA6424A IBIS Model

SCPM027.ZIP (145 KB) - Modelo IBIS
Productos y hardware compatibles
Herramienta de diseño

I2C-DESIGNER — Herramienta de diseño I2C

Utilice la herramienta I2C Designer para resolver rápidamente conflictos de direccionamiento, nivel de tensión y frecuencia en diseños basados en I2C. Ingrese entradas maestras y esclavas para generar automáticamente un árbol I2C o construir fácilmente una solución personalizada. Esta herramienta (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-00352 — Diseño de referencia de agregación de video SDI

This verified reference design is a complete four channel SDI aggregation and de-aggregation solution. One TLK10022 is used to aggregate four synchronous HD-SDI sources together into one 5.94 Gbps serial link. The serial data is transferred via copper or optical fiber where a second TLK10022 is (...)

Productos y hardware compatibles
Diseño de referencia

TIDA-00426 — Diseño de referencia de placa BERT multicanal de 12 Gbps

Este diseño de referencia es un probador de errores de bits (BERT) de bajo costo y 12 Gbps capaz de generar y verificar hasta 8 canales de secuencias binarias pseudoaleatorias (PRBS). Este diseño validado es una forma cómoda de generar flujos de bits en serie multicanal de alta velocidad de hasta (...)
Productos y hardware compatibles
Diseño de referencia

TIDA-00609 — Sistema de audio de arranque automático

The purpose of this reference design is to provide hardware and software tools that can be used as reference for audio systems. The new revision of the PurePath™ Console Motherboard (Rev F) adds stand-alone self-booting capabilities to allow making compelling demos with any evaluation module (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
UQFN (RGJ) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos