TLC372-EP

ACTIVO

Comparadores diferenciales dobles LinCMOS, producto mejorado

Detalles del producto

Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 16 Vs (min) (V) 4 Rating HiRel Enhanced Product Iq per channel (typ) (mA) 0.075 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail In to V- Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.03 VICR (max) (V) 15 VICR (min) (V) 0
Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 16 Vs (min) (V) 4 Rating HiRel Enhanced Product Iq per channel (typ) (mA) 0.075 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail In to V- Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.03 VICR (max) (V) 15 VICR (min) (V) 0
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Controlled baseline
    • One assembly/test site, one fabrication site
  • Extended temperature performance of –55°C to 125°C
  • ESD protection exceeds 2000V per MIL-STD-883, method 3015; exceeds 100V using machine model (C = 200pF, R = 0)
  • Single or dual-supply operation
  • Wide range of supply voltages . . .4V to 16V
  • Very low supply current drain . . .10µA typical
  • Fast response time . . . 420ns typical for TTL-level input step
  • Built-in ESD protection
  • High input impedance . . . 1012Ω typical
  • Extremely low input bias current. . .5pA typical
  • Ultra-stable low input offset voltage
  • Common-mode input voltage range includes ground
  • Output compatible with TTL, MOS, and CMOS
  • Pin-compatible with LM393
  • Controlled baseline
    • One assembly/test site, one fabrication site
  • Extended temperature performance of –55°C to 125°C
  • ESD protection exceeds 2000V per MIL-STD-883, method 3015; exceeds 100V using machine model (C = 200pF, R = 0)
  • Single or dual-supply operation
  • Wide range of supply voltages . . .4V to 16V
  • Very low supply current drain . . .10µA typical
  • Fast response time . . . 420ns typical for TTL-level input step
  • Built-in ESD protection
  • High input impedance . . . 1012Ω typical
  • Extremely low input bias current. . .5pA typical
  • Ultra-stable low input offset voltage
  • Common-mode input voltage range includes ground
  • Output compatible with TTL, MOS, and CMOS
  • Pin-compatible with LM393

This device is fabricated using CMOS technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 4V to 16V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 2000V ESD rating using human-body-model (HBM) testing. However, care must be exercised in handling this device as exposure to ESD can result in a degradation of the device parametric performance.

The TLC372 is characterized for operation from –55°C to 125°C.

This device is fabricated using CMOS technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 4V to 16V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 2000V ESD rating using human-body-model (HBM) testing. However, care must be exercised in handling this device as exposure to ESD can result in a degradation of the device parametric performance.

The TLC372 is characterized for operation from –55°C to 125°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TLC372-EP Dual Differential Comparator datasheet (Rev. A) PDF | HTML 27/06/2025
* Informe de radiación y confiabilidad TLC372MDREP Reliability Report 2/02/2016
* VID TLC372-EP VID V6206675 21/06/2016
Libro electrónico The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 28/03/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos