Inicio Gestión de la energía Controladores LED Drivers para pantallas LED
Inicio
Gestión de la energía
Controladores LED
Drivers para pantallas LED

TLC6948

ACTIVO

Controlador LED ES-PWM de corriente constante de 16 canales y 16 bits con multiplexado de 48 canales

Haga su pedido ahora
Hoja de datos

TLC6948

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Features Fault Detection, LED Open Detection, PWM LED Driver, Pre-Charge FET, SRAM, Thermal shutdown Analog dimming steps 128 Data transfer rate (typ) (MHz) 33 Ch to ch accuracy (typ) (±%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 85
Features Fault Detection, LED Open Detection, PWM LED Driver, Pre-Charge FET, SRAM, Thermal shutdown Analog dimming steps 128 Data transfer rate (typ) (MHz) 33 Ch to ch accuracy (typ) (±%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 85
SSOP (DBQ) 24 51.9 mm² 8.65 x 6 VQFN (RGE) 24 16 mm² 4 x 4
  • Power Supply Voltage Ranges
    • VCC Voltage Range: 3 V to 5.5 V
    • VLED Voltage Range: Up to VCC + 0.3 V
  • 16 Constant-Current-Sink Channels
    • 0.3 mA to 25 mA (3 V ≤ VCC ≤ 5.5 V)
    • Channel Current Deviation: ±1% (typical)
    • Device Current Deviation: ±1% (typical)
    • Low Knee Voltage: 0.3 V (typical) at 10 mA
  • 7-Bit (128 Steps) Global Brightness Control (BC)
  • 16-Bit (65,536 Steps) Enhanced Spectrum PWM Grayscale Control
  • Built-In Memory Supports 32 Multiplexing for TLC6946 and 48 Multiplexing for TLC6948
  • LED Display Performance Enhancement
    • Low-Grayscale Uniformity Improvement
    • Low-Grayscale Coupling Issue Elimination
    • Ghosting Removal and Caterpillar Elimination
  • High-Speed Serial-Data Interface
    • Data-Shift Clock: 33 MHz (maximum)
    • Grayscale Control Clock: 33 MHz (maximum)
    • Supports Dual-Edge Grayscale Control
  • Diagnostics and Protection
    • LED-Open Detection (LOD)
    • IREF Resistor Short Protection (ISP)
    • Thermal Shutdown (TSD)
  • Smart Power-Save Mode
  • Power Supply Voltage Ranges
    • VCC Voltage Range: 3 V to 5.5 V
    • VLED Voltage Range: Up to VCC + 0.3 V
  • 16 Constant-Current-Sink Channels
    • 0.3 mA to 25 mA (3 V ≤ VCC ≤ 5.5 V)
    • Channel Current Deviation: ±1% (typical)
    • Device Current Deviation: ±1% (typical)
    • Low Knee Voltage: 0.3 V (typical) at 10 mA
  • 7-Bit (128 Steps) Global Brightness Control (BC)
  • 16-Bit (65,536 Steps) Enhanced Spectrum PWM Grayscale Control
  • Built-In Memory Supports 32 Multiplexing for TLC6946 and 48 Multiplexing for TLC6948
  • LED Display Performance Enhancement
    • Low-Grayscale Uniformity Improvement
    • Low-Grayscale Coupling Issue Elimination
    • Ghosting Removal and Caterpillar Elimination
  • High-Speed Serial-Data Interface
    • Data-Shift Clock: 33 MHz (maximum)
    • Grayscale Control Clock: 33 MHz (maximum)
    • Supports Dual-Edge Grayscale Control
  • Diagnostics and Protection
    • LED-Open Detection (LOD)
    • IREF Resistor Short Protection (ISP)
    • Thermal Shutdown (TSD)
  • Smart Power-Save Mode

In high-density, fine-pitch LED panel applications, the performance demand for multi-channel LED drivers is increasing to achieve high multiplexing, high PWM resolution, and high refresh rates. To meet strict display quality requirements, the LED drivers must have the ability to solve various issues in different LED-matrix application scenarios.

The TLC694x device is a 16-channel, constant-current-sink LED driver. Each channel has an individually adjustable 65,536 steps of PWM grayscale control. The maximum constant-current value of all 16 channels is set by a single external resistor with 128 steps of global brightness control from 0.3 mA to 25 mA.

The TLC694x device integrates enhanced circuits to solve the various display issues in fine-pitch LED display applications: the low-grayscale uniformity issue, coupling issue, ghosting issue, and caterpillar issue.

The TLC694x device features an LED-open detection function, and the error detection results can be read via a serial data interface port. Thermal shutdown and IREF resistor short protection ensure a higher system reliability. The TLC694x device also has an smart power-save mode that sets the total current consumption to 1 mA (typical) when all outputs are off.

In high-density, fine-pitch LED panel applications, the performance demand for multi-channel LED drivers is increasing to achieve high multiplexing, high PWM resolution, and high refresh rates. To meet strict display quality requirements, the LED drivers must have the ability to solve various issues in different LED-matrix application scenarios.

The TLC694x device is a 16-channel, constant-current-sink LED driver. Each channel has an individually adjustable 65,536 steps of PWM grayscale control. The maximum constant-current value of all 16 channels is set by a single external resistor with 128 steps of global brightness control from 0.3 mA to 25 mA.

The TLC694x device integrates enhanced circuits to solve the various display issues in fine-pitch LED display applications: the low-grayscale uniformity issue, coupling issue, ghosting issue, and caterpillar issue.

The TLC694x device features an LED-open detection function, and the error detection results can be read via a serial data interface port. Thermal shutdown and IREF resistor short protection ensure a higher system reliability. The TLC694x device also has an smart power-save mode that sets the total current consumption to 1 mA (typical) when all outputs are off.
open-in-new Buscar otro/a Drivers para pantallas LED
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TLC694x 16-Channel 32-, 48-Multiplexing 16-Bit ES-PWM Constant-Current LED Driver datasheet (Rev. A) PDF | HTML 07 ene 2019
White paper Common LED Functions and LED Driver Design Considerations 21 sep 2020
User guide Using the TLC694x VQFN Evaluation Module 15 feb 2019
EVM User's guide TLC6946 Evaluation Module User's Guide 24 may 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BOOSTXL-TLC6946EVM — Módulo de evaluación de controlador LED de corriente constante ES-PWM de 16 bits y multiplexado de 3

The TLC6946 evaluation module (BOOSTXL-TLC6946EVM) is a reference for engineering demonstration and evaluation of the TLC6946 16-channel 32-multiplexing 16-bit ES-PWM constant-current LED driver. The BOOSTXL-TLC6946EVM uses three TLC6946 devices to drive 16 RGB LEDs, each device controlling one (...)
Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

BOOSTXL-TLC6948EVM — Módulo de evaluación de controlador LED de corriente constante ES-PWM de 16 bits y multiplexado de 3

The TLC694x evaluation module (BOOSTXL-TLC6948EVM) is a reference for engineering demonstration and evaluation of the TLC694x 16-channel 32-,  48-multiplexing 16-bit ES-PWM constant-current LED driver with QFN package. The BOOSTXL-TLC6948EVM uses three TLC694x VQFN package devices to drive 16 (...)
Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TLC6948 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCX9B.ZIP (146 KB) - PSpice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
SSOP (DBQ) 24 Ver opciones
VQFN (RGE) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos