Inicio Administración de potencia Supervisor & reset ICs Circuitos integrados de restablecimiento y vigilancia
Inicio
Administración de potencia
Supervisor & reset ICs
Circuitos integrados de restablecimiento y vigilancia
NUEVO

TPS388C0-Q1

ACTIVO

Supervisor de sobretensiones y baja tensión multicanal automotriz con I²C y vigilancia de ventana

Haga su pedido ahora
Hoja de datos

TPS388C0-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Number of supplies monitored 6 Threshold voltage 1 (typ) (V) 0.9, 1.08, 1.1, 1.3, 1.6, 3, 3.6, Adjustable Features Detection time delay, Reset time delay, Separate VDD & sense, Undervoltage and overvoltage monitor, Window watchdog Reset threshold accuracy (%) 0.6 Iq (typ) (mA) 0.2 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 TI functional safety category Functional Safety-Compliant Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 6 Threshold voltage 1 (typ) (V) 0.9, 1.08, 1.1, 1.3, 1.6, 3, 3.6, Adjustable Features Detection time delay, Reset time delay, Separate VDD & sense, Undervoltage and overvoltage monitor, Window watchdog Reset threshold accuracy (%) 0.6 Iq (typ) (mA) 0.2 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 TI functional safety category Functional Safety-Compliant Operating temperature range (°C) -40 to 125
WQFN (RTE) 16 9 mm² 3 x 3
  • ASIL-B Functional Safety-Compliant product
    • Development target for Functional Safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL B
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C
  • Monitor state-of-the art SoCs
    • Available in 2 to 6 voltage monitor channel options
    • Input voltage range: 2.6V to 5.5V
    • Undervoltage lockout (UVLO) (falling): 2.6V
    • High threshold accuracy:
      • ±6mV (–40°C to +125°C)
    • Fixed window threshold levels
      • 5mV steps from 0.2V to 1.475V
      • 20mV steps from 0.8V to 5.5V
  • Trigger Window Watchdog
    • Programmable OPEN/CLOSE watchdog timing via I2C (1ms to 864ms)
    • Start-up delay for SoC boot up initialization (2ms to 3.48s)
    • Programmable maximum violation count (up to 7 errors) before WDO assertion
    • Programmable WDO Delay
    • Watchdog disable pin (WDE)
  • Miniature package and minimal component cost
    • 3mm x 3mm QFN package
    • User adjustable voltage threshold levels via I2C
    • User adjustable glitch immunity and hysteresis levels via I2C
  • Designed for safety applications
    • CRC Error Check (static and dynamic)
    • Active-low open-drain NIRQ, NRST, and WDO outputs
  • ASIL-B Functional Safety-Compliant product
    • Development target for Functional Safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL B
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C
  • Monitor state-of-the art SoCs
    • Available in 2 to 6 voltage monitor channel options
    • Input voltage range: 2.6V to 5.5V
    • Undervoltage lockout (UVLO) (falling): 2.6V
    • High threshold accuracy:
      • ±6mV (–40°C to +125°C)
    • Fixed window threshold levels
      • 5mV steps from 0.2V to 1.475V
      • 20mV steps from 0.8V to 5.5V
  • Trigger Window Watchdog
    • Programmable OPEN/CLOSE watchdog timing via I2C (1ms to 864ms)
    • Start-up delay for SoC boot up initialization (2ms to 3.48s)
    • Programmable maximum violation count (up to 7 errors) before WDO assertion
    • Programmable WDO Delay
    • Watchdog disable pin (WDE)
  • Miniature package and minimal component cost
    • 3mm x 3mm QFN package
    • User adjustable voltage threshold levels via I2C
    • User adjustable glitch immunity and hysteresis levels via I2C
  • Designed for safety applications
    • CRC Error Check (static and dynamic)
    • Active-low open-drain NIRQ, NRST, and WDO outputs

The TPS388C0x-Q1 device is an integrated multichannel window monitor reset IC with remote sense pin options and integrated window watchdog available in a 16-pin 3mm x 3mm QFN package.

This highly accurate multichannel voltage supervisor is designed for systems that operate on low-voltage supply rails and have marginal supply tolerances. Internal glitch immunity and noise filters further eliminate false resets resulting from erroneous signals. This TPS388C0x-Q1 device does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further optimizes overall accuracy, cost, size, and improves reliability for safety systems. I2C functionality gives flexibility in selecting thresholds, reset delays, glitch filters, and pin functionality. This device offers CRC error checking. The device has a built in window watchdog with independent watchdog enable.

This device has a low typical quiescent current specification of 1500µA (typical). The TPS388C0x-Q1 is designed for automotive applications and is qualified for AEC-Q100 Grade 1 and qualified as a functional safety compliant device with ASIL-B rating.

The TPS388C0x-Q1 device is an integrated multichannel window monitor reset IC with remote sense pin options and integrated window watchdog available in a 16-pin 3mm x 3mm QFN package.

This highly accurate multichannel voltage supervisor is designed for systems that operate on low-voltage supply rails and have marginal supply tolerances. Internal glitch immunity and noise filters further eliminate false resets resulting from erroneous signals. This TPS388C0x-Q1 device does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further optimizes overall accuracy, cost, size, and improves reliability for safety systems. I2C functionality gives flexibility in selecting thresholds, reset delays, glitch filters, and pin functionality. This device offers CRC error checking. The device has a built in window watchdog with independent watchdog enable.

This device has a low typical quiescent current specification of 1500µA (typical). The TPS388C0x-Q1 is designed for automotive applications and is qualified for AEC-Q100 Grade 1 and qualified as a functional safety compliant device with ASIL-B rating.
filter Buscar otro/a Circuitos integrados de restablecimiento y vigilancia
Descargar Ver vídeo con transcripción Video
Solicitar más información

El manual de seguridad funcional y los informes están disponibles. Solicitar ahora

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS388C0x-Q1 Multichannel Overvoltage and Undervoltage I2 C Programmable Voltage Supervisor and Monitor with Window Watchdog datasheet PDF | HTML 02 abr 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de diseño

TPS388C0-Q1-DESIGN-TOOLS — TPS388C0-Q1 Functional Safety Documents

TPS388C0-Q1 Functional Safety Documents
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados de restablecimiento y vigilancia
  • TPS388C0-Q1 — Supervisor de sobretensiones y baja tensión multicanal automotriz con I²C y vigilancia de ventana
Solicitar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTE) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos