TPS56221

Name: TPS56221
Brand: TI
SKU: TPS56221
Price: 3.605 USD

ACTIVO

Convertidor reductor SWIFT™ síncrono de 4.5 V a 14 V y 25 A

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 4.5-V to 14-V Input High-Current Synchronous Buck SWIFT Converter, TPS56221 datasheet (Rev. D) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS543B25

ACTIVO

Convertidor reductor SWIFT™ síncrono de 25 A con entrada de 4 V a 18 V, modo de corriente avanzado Fixed frequency converter with smaller solution size and internal compensation

Funcionalidad similar a la del dispositivo comparado

TPS543B22

ACTIVO

Convertidor reductor SWIFT™ síncrono de 20 A con entrada de 4 V a 18 V, modo de corriente avanzado Fixed frequency converter with smaller solution size and internal compensation

TPS56221

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

25

Vin (max) (V)

14

Vin (min) (V)

4.5

Vout (max) (V)

12

Vout (min) (V)

0.6

Features

Adjustable current limit, Enable, Forced PWM, Overcurrent protection, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, UVLO Fixed

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0025

Duty cycle (max) (%)

93

Rating

Catalog

Topology

Buck

Iout (max) (A)

25

Vin (max) (V)

14

Vin (min) (V)

4.5

Vout (max) (V)

12

Vout (min) (V)

0.6

Features

Adjustable current limit, Enable, Forced PWM, Overcurrent protection, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, UVLO Fixed

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0025

Duty cycle (max) (%)

93

LSON-CLIP (DQP)

22

30 mm² 6 x 5

4.5-V to 14-V Input Voltage Range
Incorporates Power Block Technology
Up to 25-A Output Current
Fixed-Frequency Options of 300 kHz, 500 kHz,
and 1 MHz
High-Side and Low-Side MOSFET R_DS(on) Sensing
Programmable Soft-Start
600-mV Reference Voltage With 1% Accuracy
Voltage Mode Control with Feed-Forward
Supports Prebiased Output
Thermal Shutdown
22-Pin 5-mm × 6-mm PQFN PowerPAD™ Package
For SWIFT Power Products Documentation,
see http://www.ti.com/swift

4.5-V to 14-V Input Voltage Range
Incorporates Power Block Technology
Up to 25-A Output Current
Fixed-Frequency Options of 300 kHz, 500 kHz,
and 1 MHz
High-Side and Low-Side MOSFET R_DS(on) Sensing
Programmable Soft-Start
600-mV Reference Voltage With 1% Accuracy
Voltage Mode Control with Feed-Forward
Supports Prebiased Output
Thermal Shutdown
22-Pin 5-mm × 6-mm PQFN PowerPAD™ Package
For SWIFT Power Products Documentation,
see http://www.ti.com/swift

The TPS56221 device is a high-efficiency and high-current synchronous buck converter designed to operate from a supply from 4.5 V to 14 V. The device can produce an output voltage as low as 0.6 V at loads up to 25 A. Integrated NexFET™ Power MOSFETs provide a small footprint and ease of use.

The device implements a voltage-mode control with voltage feed-forward compensation that responds instantly to input voltage change.

The TPS56221 is available in a thermally enhanced 22-pin PQFN (DQP) PowerPAD package.

The device offers design flexibility with a variety of user programmable functions, including soft-start, overcurrent protection (OCP) levels, and loop compensation. OCP levels are programmed by a single external resistor connected from the ILIM pin to the circuit ground. During the initial power-on sequence, the device enters a calibration cycle, measures the voltage at the ILIM pin, and sets an internal OCP voltage level. During operation, the programmed OCP voltage level is compared to the voltage drop across the low-side FET when it is on to determine whether there is an overcurrent condition. It then enters a shutdown/restart cycle until the fault is removed.

The TPS56221 device is a high-efficiency and high-current synchronous buck converter designed to operate from a supply from 4.5 V to 14 V. The device can produce an output voltage as low as 0.6 V at loads up to 25 A. Integrated NexFET™ Power MOSFETs provide a small footprint and ease of use.

The device implements a voltage-mode control with voltage feed-forward compensation that responds instantly to input voltage change.

The TPS56221 is available in a thermally enhanced 22-pin PQFN (DQP) PowerPAD package.

The device offers design flexibility with a variety of user programmable functions, including soft-start, overcurrent protection (OCP) levels, and loop compensation. OCP levels are programmed by a single external resistor connected from the ILIM pin to the circuit ground. During the initial power-on sequence, the device enters a calibration cycle, measures the voltage at the ILIM pin, and sets an internal OCP voltage level. During operation, the programmed OCP voltage level is compared to the voltage drop across the low-side FET when it is on to determine whether there is an overcurrent condition. It then enters a shutdown/restart cycle until the fault is removed.

filter

Buscar otro/a DC/DC converters

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPS56121

ACTIVO

Convertidor reductor SWIFT™ síncrono de 4.5 V a 14 V y 15 A Lower current equivalent part.

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 9

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Data sheet	4.5-V to 14-V Input High-Current Synchronous Buck SWIFT Converter, TPS56221 datasheet (Rev. D)		09 feb 2016
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25 mar 2024
	Application note	Calculating Efficiency (Rev. A)		06 mar 2020
	Selection guide	SWIFT DC/DC Converters Selector Guide (Rev. G)		06 feb 2019
	Selection guide	Power Management Guide 2018 (Rev. R)		25 jun 2018
	Application note	Analysis and Design of Input Filter for DC-DC Circuit		27 nov 2017
	Application note	Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co		11 jul 2014
	Application note	PowerStack™ Packaging Technology Overview		18 jul 2011
	Application note	Understanding Thermal Dissipation and Design of a Heatsink		04 may 2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS56221EVM-579 — Módulo de evaluación para convertidor SWIFT™ reductor síncrono de alta corriente (25 A) TPS56221

The Texas Instruments TPS56221EVM-579 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS56221 4.5V to 14V Input, 25A High Current Synchronous Step-Down Converter. The EVM is designed to use a regulated 12V (8V to 14V) bus voltage to provide a regulated 1.0-V (...)

Guía del usuario: PDF | HTML