Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)
Inicio
Gestión de la energía
AC/DC & DC/DC converters (integrated FET)

TPS61220

ACTIVO

Convertidor elevador de entrada de 0.7 V y tensión de salida ajustable, con corriente quiescente de

Haga su pedido ahora
Hoja de datos

TPS61220

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Vin (min) (V) 0.7 Vin (max) (V) 5.5 Topology Boost Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Features Synchronous Rectification Vout (min) (V) 1.8 Vout (max) (V) 6 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005
Vin (min) (V) 0.7 Vin (max) (V) 5.5 Topology Boost Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Features Synchronous Rectification Vout (min) (V) 1.8 Vout (max) (V) 6 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005
SOT-SC70 (DCK) 6 4.2 mm² 2 x 2.1
  • Up to 95% Efficiency at Typical Operating
    Conditions
  • 5.5 µA Quiescent Current
  • Startup Into Load at 0.7 V Input Voltage
  • Operating Input Voltage from 0.7 V to 5.5 V
  • Pass-Through Function during Shutdown
  • Minimum Switching Current 200 mA
  • Protections:
    • Output Overvoltage
    • Overtemperature
    • Input Undervoltage Lockout
  • Adjustable Output Voltage from 1.8 V to 6 V
  • Fixed Output Voltage Versions
  • Small 6-pin SC-70 Package
  • Up to 95% Efficiency at Typical Operating
    Conditions
  • 5.5 µA Quiescent Current
  • Startup Into Load at 0.7 V Input Voltage
  • Operating Input Voltage from 0.7 V to 5.5 V
  • Pass-Through Function during Shutdown
  • Minimum Switching Current 200 mA
  • Protections:
    • Output Overvoltage
    • Overtemperature
    • Input Undervoltage Lockout
  • Adjustable Output Voltage from 1.8 V to 6 V
  • Fixed Output Voltage Versions
  • Small 6-pin SC-70 Package

The TPS6122x family devices provide a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm × 2 mm to enable small circuit layout size.

The TPS6122x family devices provide a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm × 2 mm to enable small circuit layout size.
open-in-new Buscar otro/a AC/DC & DC/DC converters (integrated FET)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TLV61070A ACTIVO Convertidor de refuerzo de 5 V y 2 A con tensión de entrada mínima de 0.5 V More cost-effective
TPS61033 ACTIVO Convertidor elevador de 5 V y 5 A con buena alimentación, descarga de salida y control PFM/PWM 5A/1.5A valley switch current limit and SOT583 packge with size of 2.1 x 1.2mm
NUEVO TPS61299 ACTIVO Convertidor elevador de 5.5 V y baja IQ de 95 nA con límite de corriente de entrada y rápido rendimi Lower IQ, true disconnect and higher IOUT
Funcionalidad similar a la del dispositivo comparado
TPS61098 ACTIVO Convertidos de refuerzo síncrono de tensión de entrada baja, tensión de salida de 4.3 V, con LDO int For applications requiring ultra-low Iq or smaller package.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 15
Tipo Título Fecha
* Data sheet TPS6122x Low Input Voltage, 0.7V Boost Converter With 5.5μA Quiescent Current datasheet (Rev. B) PDF | HTML 11 nov 2014
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28 oct 2022
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11 dic 2018
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 15 jun 2017
Application note Calculating and Measuring the No Load Input Current of the Boost Converter 23 sep 2016
Technical article Trends in building automation: connected sensors in safety and security PDF | HTML 20 jul 2016
Application note How to Select a Proper Inductor for Low Power Boost Converter 03 jun 2016
Application note Five Steps to a Good PCB Layout of the Boost Converter PDF | HTML 03 may 2016
Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 22 ene 2014
Application note Automated Frequency Response Analyzer 09 oct 2013
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 26 abr 2012
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17 jun 2011
EVM User's guide TPS61220EVM-319 User's Guide 02 feb 2009
Application note Minimizing Ringing at the Switch Node of a Boost Converter 15 sep 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADS8686SEVM-PDK — Kit de demostración de rendimiento (PDK) ADC de muestreo simultáneo doble para ADS8686S de 16 bits y

The ADS8686S evaluation module (EVM) performance demonstration kit (PDK) is a platform for evaluating the ADS8686S dual simultaneous-sampling analog-to-digital converter (ADC) with an integrated analog front end (AFE).

ADS8686SEVM-PDK includes the ADS8686SEVM board and a precision host interface (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TPS61220EVM-319 — Módulo de evaluación TPS61220EVM-319

The TPS61220EVM-319 facilitates evaluation of the TPS61220 low input voltage boost converter.

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPS61220 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMAK1A.ZIP (62 KB) - PSpice Model
Descargar
Lista de materiales (BOM)

Bill of Materials for the ECG With Bluetooth Low-Energy

SNVC113.PDF (102 KB)
Descargar
Archivo Gerber

ECG With Bluetooth Low-Energy Gerber

SNVC114.ZIP (901 KB)
Descargar
Esquema

Schematic for the ECG With Bluetooth Low-Energy

SNVC112.PDF (214 KB)
Descargar
Diseños de referencia

TIDA-00300 — Diseño de referencia de arquitectura de potencia aislada para módulos de comunicación y entrada/sali

This reference design provides a means to isolate I2C or SPI communication lines. This is often required in grid infrastructure applications such as protection relays and circuit breakers where high voltages are involved. This reference design provides both power isolation and signal isolation.
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00214 — Diseño de referencia BoosterPack RS-485 semidúplex, no aislado

The Half-Duplex, Non-Isolated RS-485 BoosterPack allows for easy evaluation of TI’s RS-485 transceivers for applications such as building management systems (BMS), factory automation, building automation, and HVAC. The BoosterPack is designed and tested to support data rates up to 1.25 Mbps (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDM-BIOSIGNMONITOR — Diseño de referencia de monitor de señales biológicas multiparamétricas para monitoreo personal

The Multi-Parameter Bio-signal Monitor (MPBSM) is a proof-of-concept Evaluation Module (EVM) that is capable of measuring three of the four primary vital signs. The MPBSM proof of concept can directly measure Electrocardiogram (ECG), Galvanic Skin Response (GSR), and skin temperature. The MPBSM (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00881 — Diseño de referencia del cargador inalámbrico de 50 mA con BoosterPack de bobina de 19 mm

The TIDA-00881 reference design is a booster pack that provides a wireless charger and an entire battery managment solution to power any low power TI Launchpad. This design is a  highly integrated power management solution that is well-suited for ultra-low power applications using an off the (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00668 — Diseño de referencia del paquete de refuerzo del cargador inalámbrico de 50 mA

The TIDA-00668 is a booster pack that provides a wireless charger and an entire battery managment solution to power any low power TI Launchpad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications.

The primary method of storage is an (...)

Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00588 — Diseño de referencia del paquete de refuerzo de la captación de energía

The TIDA-00588 reference design is a BoosterPack that harvests energy from a wide variety of current sources or from the onboard solar cells to power any low-power TI LaunchPad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications.

There (...)

Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP9771 — Circuito de almacenamiento de energía para fuente de alimentación ininterrumpida y extensión de la v

An alkaline battery and a boost converter are usually used to power the load system which requires high voltage, such as the motor driver in insulin pump. In this reference design, a lithium polymer battery is added to the output of the boost converter to absorb the pulse load current and extend (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00096 — Monitor cardiaco inalámbrico con Bluetooth de baja energía

The Wireless Heart Rate Monitor with Bluetooth low-energy (BLE) is intended as a reference design that customers can use to develop end-products for battery-powered, 3-channel health and fitness electrocardiogram (ECG) applications.  The ADS1293 is a highly integrated low-power analog front (...)
Design guide: PDF
Esquema: PDF
Paquete Pasadores Descargar
SOT-SC70 (DCK) 6 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos