NUEVO

TPSM8F7620

Name: TPSM8F7620
Brand: TI
SKU: TPSM8F7620
Price: 26 USD

ACTIVO

Módulo de potencia reductor apilable de 4 V a 17 V, modo de corriente, cuádruple 6 A

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPSM8F7x20 4V to 17V, 4/6A, Quad Step-Down Power Module datasheet (Rev. A) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

TPSM5D1806

ACTIVO

Módulo de alimentación de salida, con entrada de 4.5 V a 15 V, doble de 6 A, simple de 12 A Newer stackable module with Quad-outputs and External Compensation

TPSM8F7620

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck, Synchronous Buck

Iout (max) (A)

6, 12, 18, 24

Vin (max) (V)

17

Vin (min) (V)

4

Vout (max) (V)

11

Vout (min) (V)

0.6

Features

Adjustable soft start, Adjustable switching frequency, Enable, External Sync, Frequency synchronization, Overcurrent protection, Overvoltage protection, Phase Interleaving, Power good, Stackable, UVLO, Undervoltage protection

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

92

Control mode

current mode control

Switching frequency (min) (kHz)

400

Switching frequency (max) (kHz)

2200

Rating

Catalog

Topology

Buck, Synchronous Buck

Iout (max) (A)

6, 12, 18, 24

Vin (max) (V)

17

Vin (min) (V)

4

Vout (max) (V)

11

Vout (min) (V)

0.6

Features

Adjustable soft start, Adjustable switching frequency, Enable, External Sync, Frequency synchronization, Overcurrent protection, Overvoltage protection, Phase Interleaving, Power good, Stackable, UVLO, Undervoltage protection

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

92

Control mode

current mode control

Switching frequency (min) (kHz)

400

Switching frequency (max) (kHz)

2200

FCCSP (APG)

112

84 mm² 12 x 7

Fixed-frequency, peak current mode (PCM) control
Small form factor 12.0mm x 7.0mm x 2.4mm, overmolded BGA power module
Four independent synchronous buck outputs
Supports 2, 3, and 4-phase stackability for higher output current
High-efficiency, integrated MOSFETs, inductor, and basic passives.
4V to 17V input voltage range
0.6V to 11V output voltage range
Selectable internal or external compensation
Continuously adjustable switching frequency from 400kHz to 2.2MHz
Synchronizable to an external clock
0.6V, ±0.75% voltage reference accuracy over the full temperature range
Sequencing features
- Enable with adjustable input UVLO
- Power-good output monitor
- Output discharge
- Monotonic start-up into prebiased outputs
- Adjustable soft-start time with external SS pin
Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
Analog temperature output on the MSEL1/2 pins
–40°C to 125°C module temperature range
Create a custom design using TPSM8F7x20 with the WEBENCH® Power Designer

Fixed-frequency, peak current mode (PCM) control
Small form factor 12.0mm x 7.0mm x 2.4mm, overmolded BGA power module
Four independent synchronous buck outputs
Supports 2, 3, and 4-phase stackability for higher output current
High-efficiency, integrated MOSFETs, inductor, and basic passives.
4V to 17V input voltage range
0.6V to 11V output voltage range
Selectable internal or external compensation
Continuously adjustable switching frequency from 400kHz to 2.2MHz
Synchronizable to an external clock
0.6V, ±0.75% voltage reference accuracy over the full temperature range
Sequencing features
- Enable with adjustable input UVLO
- Power-good output monitor
- Output discharge
- Monotonic start-up into prebiased outputs
- Adjustable soft-start time with external SS pin
Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
Analog temperature output on the MSEL1/2 pins
–40°C to 125°C module temperature range
Create a custom design using TPSM8F7x20 with the WEBENCH® Power Designer

The TPSM8F7x20 is a power-dense quad-channel buck power module designed to provide efficient and reliable power conversion for a wide output voltage range from 0.6V to 11V. The module integrates MOSFETs, inductor, and select capacitors to reduce board space and layout complexity. The module can be configured into both multiphase and multi-output rails by supporting 2, 3, and 4-phase stackability with interleaved phases. Under steady-state conditions the module operates in FCCM with a fixed-frequency that is resistor adjustable from 400kHz to 2.2MHz and synchronizable to an external clock.

TPSM8F7x20 module employs current mode control with internal and external compensation. Sequencing requirements are easily met with the external soft-start, active output discharge, adjustable EN, and power-good features. A full suite of protection features (output OV and UV, input UVLO, TSD, OC) are also included for robustness.

The TPSM8F7x20 is a power-dense quad-channel buck power module designed to provide efficient and reliable power conversion for a wide output voltage range from 0.6V to 11V. The module integrates MOSFETs, inductor, and select capacitors to reduce board space and layout complexity. The module can be configured into both multiphase and multi-output rails by supporting 2, 3, and 4-phase stackability with interleaved phases. Under steady-state conditions the module operates in FCCM with a fixed-frequency that is resistor adjustable from 400kHz to 2.2MHz and synchronizable to an external clock.

TPSM8F7x20 module employs current mode control with internal and external compensation. Sequencing requirements are easily met with the external soft-start, active output discharge, adjustable EN, and power-good features. A full suite of protection features (output OV and UV, input UVLO, TSD, OC) are also included for robustness.

filter

Buscar otro/a Módulos de potencia (inductor integrado)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	TPSM8F7x20 4V to 17V, 4/6A, Quad Step-Down Power Module datasheet (Rev. A)	PDF \| HTML	19 dic 2025
	Certificate	TPSM8F7620EVM EU Declaration of Conformity (DoC)		12 sep 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM8F7620EVM — Módulo de evaluación TPSM8F7620

El TPSM8F7x20EVM (SR130) facilita la evaluación de los convertidores buck TPSM8F7x20 de 4 A y 6 A compatibles con pin en un pequeño encapsulado BGA sobremoldeado de 7 mm por 12 mm. El SR130-001 utiliza el TPSM8F7620 de 6 A para generar cuatro carriles de tensión: 1.2 V_OUT, 2.5 V_OUT, 3.3 V_OUT y 5 V_(...)

Guía del usuario: PDF | HTML

Solicitar

Modelo de simulación

TPSM8F7620 PSpice Transient Model

SLVMES7.ZIP (144 KB) - PSpice Model

Descargar

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
FCCSP (APG)	112	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TPSM8F7620

Módulo de potencia reductor apilable de 4 V a 17 V, modo de corriente, cuádruple 6 A

Se encuentra disponible una versión más nueva de este producto

Funcionalidad similar a la del dispositivo comparado

TPSM8F7620

Detalles del producto

Documentación técnica

Diseño y desarrollo

TPSM8F7620EVM — Módulo de evaluación TPSM8F7620

TPSM8F7620 PSpice Transient Model

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos