Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UCC28070A

ACTIVO

Controlador PFC bifásico intercalado con CCM y rango de frecuencia ampliado (10 kHz a 300 kHz)

Detalles del producto

Topology Boost, PFC controller Control mode CCM Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
Topology Boost, PFC controller Control mode CCM Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
TSSOP (PW) 20 41.6 mm² (6.5 mm × 6.4 mm)
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Synchronization capability to external clock
  • Highly-linear multiplier output with internal quantized voltage feed-forward for near-unity PF
  • Enhanced transient response through slew-rate correction of voltage amplifier output current
  • Extended-range programmable frequency
    • UCC28070A: 10kHz to 300kHz
    • UCC28070: 30kHz to 300kHz
  • Programmable maximum duty-cycle clamp
  • Programmable frequency-dithering rate and magnitude (up to 30kHz) for EMI reduction
  • Programmable soft-start
  • Programmable peak current limiting
  • External PFC-disable interface
  • Protections: bias-supply UVLO, output overvoltage, open‑loop detection, open-circuit detection on VSENSE and VINAC, and PFC-enable monitoring
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Synchronization capability to external clock
  • Highly-linear multiplier output with internal quantized voltage feed-forward for near-unity PF
  • Enhanced transient response through slew-rate correction of voltage amplifier output current
  • Extended-range programmable frequency
    • UCC28070A: 10kHz to 300kHz
    • UCC28070: 30kHz to 300kHz
  • Programmable maximum duty-cycle clamp
  • Programmable frequency-dithering rate and magnitude (up to 30kHz) for EMI reduction
  • Programmable soft-start
  • Programmable peak current limiting
  • External PFC-disable interface
  • Protections: bias-supply UVLO, output overvoltage, open‑loop detection, open-circuit detection on VSENSE and VINAC, and PFC-enable monitoring

The UCC28070A and UCC28070 are advanced power factor correction (PFC) controllers that each integrate two pulse-width modulators (PWMs) operating interleaved by 180° in CCM boost-mode. Both devices can switch at frequencies up to 300kHz, while the UCC28070A device is capable of operating down to 10kHz for IGBT power-switch based PFC converters in high-power applications. The minimum operating frequency of the UCC28070 device is limited to 30kHz.

The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted-EMI filtering becomes easier and less expensive. All the other features and benefits of the UCC28070A and UCC28070 devices are the same.

Both devices feature multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. In addition, frequency dithering, clock synchronization, and slew-rate enhancement further expand the potential for performance improvements. Also, protection features include output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

The UCC28070A and UCC28070 are advanced power factor correction (PFC) controllers that each integrate two pulse-width modulators (PWMs) operating interleaved by 180° in CCM boost-mode. Both devices can switch at frequencies up to 300kHz, while the UCC28070A device is capable of operating down to 10kHz for IGBT power-switch based PFC converters in high-power applications. The minimum operating frequency of the UCC28070 device is limited to 30kHz.

The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted-EMI filtering becomes easier and less expensive. All the other features and benefits of the UCC28070A and UCC28070 devices are the same.

Both devices feature multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. In addition, frequency dithering, clock synchronization, and slew-rate enhancement further expand the potential for performance improvements. Also, protection features include output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCC28070 and UCC28070A Extended Frequency Range (10kHz to 300kHz), Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. C) PDF | HTML 28/07/2025
Product overview PFC Controller Step-by-Step Selection Guide PDF | HTML 28/02/2023
Nota sobre la aplicación UCC2806x PCB Layout Guideline for PFC 29/04/2019
Informe Advancing Power Supply Solutions Through the Promise of GaN 24/02/2015
Más documentación Design Review of a Full-Featured 350-W Offline Power Converter 29/10/2013
Nota sobre la aplicación UCC28070 Implement Bridgeless PFC Pre-Regulator Design 18/06/2009
Guía del usuario UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) 12/05/2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCC28070EVM — Módulo de evaluación UCC28070

El módulo de evaluación UCC28070 es un prerregulador PFC bifásico intercalado 300 W. Utiliza técnicas de control del modo de corriente media para lograr un factor de potencia cercano a la unit. El prerregulador se diseñó para funcionar con una entrada de línea de ca universal de 85 V a 265 V y (...)
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

UCC28070 PSpice Average Model

SLUM098.ZIP (210 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

UCC28070 PSpice Start-up Simulation Using Average Model

SLUM097.ZIP (76 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SLUC114 — UCC28070 Excel Applications Design Tool

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 20 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Serie de videos

Ver todos los videos

Videos